• Journal of Welding and Joining
• /
• v.33 no.6
• /
• pp.49-54
• /
• 2015

Welding process is of importance to assemble products or structures, but also the process is structural weakness due to stress concentration in welding joint. The fatigue design of welded joint requires time & labor consuming fatigue test because the fatigue life is various according to the depth of joint, joint type and load type etc. In fatigue design codes, they guide to classify welding joints with their shape( BS7608, IIW Documents) and provide fatigue assessment information. In terms of numerical method for fatigue analysis, it is also difficult to decide the stress peak in joint because of mesh sensitivity which means that stress value is varies with element type or size on stress concentration zone. Hot-spot method is used generally, but Battelle of United States proposed Master S-N Curve based on structural stresses converted by mechanical equilibrium theory. In this research, we extracted master S-N curve from Battelle's fatigue test DB including test data of various welding joints to apply on Non-Load-Carrying cruciform Joint. Comparing fatigue results between the case of using normal stress and case of structural stress cor the cruciform Joint, The suggested Battelle method showed successive results.

• Computers and Concrete
• /
• v.6 no.4
• /
• pp.343-356
• /
• 2009

Experiments were designed to investigate the flow behavior of portland cement paste and concrete incorporating superplasticizers. The paste and concrete mixtures were subjected to prolonged mixing for up to 110 min at high temperature. The yield stress values of concrete and that of the corresponding cement paste were measured using a rotating rheometer and viscometer, respectively. The results reveal a weak linear correlation between the yield stress of concrete mixtures and that of the corresponding cement pastes. Results also indicate that the yield stress of concrete varies in a linear fashion with the elapsed time, while its variations with the temperature and superplasticizer dosage follow power and inverse power functions, respectively. In this study, the genetic algorithms (GA) technique was used to predict the yield stress of concrete considering various parameters, such as the mixing time, ambient temperature, and superplasticizer dosage. A sensitivity study was conducted to evaluate the ability of the GA equations thus developed to capture the effects of test parameters on the yield stress of concrete. It was found that the GA equations were sensitive to the effects of test parameters and provided yield stress predictions that compared well with corresponding experimental data.

• KNOM Review
• /
• v.24 no.2
• /
• pp.35-47
• /
• 2021

Various stress exists in a modern society, which requires constant competition and improvement. A person under stress often shows his pressure in his facial expression and language. Therefore, it is possible to measure the pressure using facial expression and language analysis. The paper proposes a stress measurement system using facial expression and language sensitivity analysis. The method analyzes the person's facial expression and language sensibility to derive the stress index based on the main emotional value and derives the integrated stress index based on the consistency of facial expression and language. The quantification and generalization of stress measurement enables many researchers to evaluate the stress index objectively in general.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.6
• /
• pp.83-91
• /
• 2014

The global community demands the reduction of environmental pollution such as greenhouse gas and carbon dioxide emissions. According to these requirements, the road construction project in the highest energy consuming industry is required the efficient way of reducing environmental pollution emissions. In this study, during the whole life cycle process, an environment impact assessment was performed for the several road construction projects in order to evaluate environmental stress through the road construction process. This study provides a proper process of environment impact assessment for life cycle assessment (LCA) analysis of road construction project, and figures the environmental stress regarding to the major construction materials for the case projects. In addition, this study conducted a sensitivity analysis for the key materials of environmental stress through the quantity analysis of major materials for the 1km section of a road construction. By this sensitivity analysis of total environmental stress change from the different volumes of constructing materials, it would be useful information for the environment impact assessment for the future road construction project.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.57-65
• /
• 2022

This study investigated the electromechanical response of smart ultra-high performance fiber reinforced concretes (S-UHPFRCs) under flexural loading to evaluate the self-sensing capacity of S-UHPFRCs in both tension and compression region. The electrical resistivity of S-UHPFRCs under flexural continuously changed even after first cracking due to the deflection-hardening behavior of S-UHPFRCs with the appearance of multiple microcracks. As the equivalent bending stress increased, the electrical resistivity of S-UHPFRCs decreased from 976.57 to 514.05 kΩ(47.0%) as the equivalent bending stress increased in compression region, and that did from 979.61 to 682.28 kΩ(30.4%) in tension region. The stress sensitivity coefficient of S-UHPFRCs in compression and tension region was 1.709 and 1.098 %/MPa, respectively. And, the deflection sensitivity coefficient of S-UHPFRCs in compression region(30.06 %/mm) was higher than that in tension region(19.72 %/mm). The initial deflection sensing capacity of S-UHPFRCs was almost 50% of each deflection sensitivity coefficient, and it was confirmed that it has an excellent sensing capacity for the initial deflection. Although both stress- and deflection-sensing capacity of S-UHPFRCs under flexural were higher in compression region than in tension region, S-UHPFRCs are sufficient as a self-sensing material to be applied to the construction field.

• Animal cells and systems
• /
• v.7 no.4
• /
• pp.345-348
• /
• 2003

The effects of acute acid stress on hatching success and hatching period of laboratory-reared hermaphroditic fish Rivulus marmoratus were examined. The effects of acute acid toxicity on mortality was also determined in three life stages of this fish. There was a significant negative effect of acid stress on hatching performance in the R. marmoratus embryos. The hatching success was only 5% at pH 3.5 compared to over 78% at pH higher than 4.0. The hatching period was also delayed by low pH treatments. The larval and juvenile stages were more sensitive to acid toxicity on mortality than the adult stage, but larvae and juveniles showed similar sensitivity. The 96-h LC50 value was pH 3.8 in larval and juvenile stages and pH 3.3 in adult stage.

• Progress in Superconductivity and Cryogenics
• /
• v.3 no.1
• /
• pp.6-10
• /
• 2001

Stress/stram dependencies of the critical current $I_c$ in AgMgNi sheathed multifilamentary Bi(2212) superconducting tapes were evaluated at 77K, 0T. The external reinforcement was accomplished by soldering Ag-Mg tapes to sin91e side or both sides of the sample. With the external reinforcement. the strength of tapes increased but $I_c$, decreased The $I_c$, degradation characteristic according to the external reinforcement was improved markedly in terms of the stress although it appeared less rectal.table on the basis of the strain. Effects of external reinforcement were discussed in a viewpoint of monitoring sensitivity of cracking in superconducting filaments by considering n-value representing the transport behavior of the current. It is closely associated with the location of them relative to the voltage-monitoring region in the tape.

• Journal of Korean Academy of Nursing
• /
• v.19 no.2
• /
• pp.135-146
• /
• 1989

This study was undertaken to assess the effect of sound stress on humoral and cellular immune responses to thymus-dependent and independent antigens in mice. After mice were exposed to 4 hr daily sound stessors(83㏈) for 4 days before or after immunization, the primary and / or secondary immune response to sheep red blood cells(SRBC), polyvinylpyrroridone(PVP) or picry1 chloride(TNCB) were assayed. When mice were exposed to sound stressor before or after immunization, delayed-type hypersensitivity reaction and contact sensitivity to TNCB was remarkably depressed compared with those of the unstressed control mice. However, the primary and secondary hemagglutinin response of the stresed mice to SRBC showed a pronounced increase compared with that of the unstressed mice, In contrast to antibody response to SRBC, the primary antibody response of the stressed mic to PVP was almost not detected. surprisingly, the secondary antibody response to PVP of the mice receiving the secondary sound stress was markedly increased when the immune-depressed mice received the secondary immunization with PVP at 46 days after the primary immunization. The susceptibility of mice to intraven-oulsy infected Candida albicans was not changed by the sound stress.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.6
• /
• pp.1169-1175
• /
• 2009

In this paper, the inferences of data obtained from periodic inspection and type I censoring for the step-stress accelerated life test are studied. The exponential distribution with a failure rate function that a log-linear function of stress and the tampered failure rate model are considered. The maximum likelihood estimators of the model parameters are estimated and also the optimal stress change time which minimize the asymptotic variance of maximum likelihood estimators of parameters is determined. A numerical example will be given to illustrate the proposed inferential procedures and the sensitivity of the asymptotic variance of the estimated mean by the guessed parameters is investigated.

• Journal of Sensor Science and Technology
• /
• v.19 no.1
• /
• pp.62-66
• /
• 2010

We have proposed and demonstrated a rotation angle sensor based on the stress -optic effect of a fused fiber coupler whose transmission spectrum is altered by the torsional stress. The peak of transmission spectrum was shifted to longer wavelength region with rotation of the coupler. The rotation angle sensor revealed reproducibility and symmetric behavior with respect to the rotation direction. The sensitivity of the sensor was 0.367 [nm/degee].