• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.4 no.2
• /
• pp.217-228
• /
• 1997

According to industralization the percentage of working women with children is on the continuous increase. There has been a growing concern over important health problems of middle-aged women, especially with working women. But we didn't know how to care of themselves yet even if it was importment to fint out that. So this reseach was an attempt to identify the nature of experience of their health management so that it is to be contributed to be knowledge development of women' health management strategy. The phenomenological approach in qualitative studies was used to serve this purpose. Subjects were 10 middle-aged working women having children in well-being state. The result of this study was as follows : 'Diet pattern' was to unbalanced and irregular but they tried to correct balanced and harmony dietary life. 'Exercise' was very simple and irregular. They have closed-minded of kinds of exercise. 'Controlling the environment and their minds' was to obtain emotional stability and be free from stress. They put emphasis on refraining from being overtiring and watching their condition carefully. They always tried to keep the peaceful mind. 'Reducing fatigue' was to be bathing, hot streamed-bath, finger pressure therapy, massage, singing, communication with others and maintenance of personal relationships. 'Identification of self-esteem' was very key point to maintain their health. Working regulary gave them to please and value of the life. 'Work oriented life pattern' was to be harm their health state so that it need to be available clinics to check up their health state after work. The rest of this study showed that it need to be social support for working women to work with comfort. Further study regarding working women engaging in the lower level is nesessary.

• Geomechanics and Engineering
• /
• v.19 no.6
• /
• pp.485-498
• /
• 2019

Pre-tensioned rock bolts can be classified into fully anchored, lengthening anchored and point anchored bolts based on the bond length of the resin or cement mortar inside the borehole. Bolts in varying anchoring methods may significantly affect the supporting effect of surrounding rock around a tunnel. However, thus far, the theoretical basis of selecting a proper anchoring method has not been thoroughly investigated. Based on this problem, 16 schemes were designed while incorporating the effects of anchoring length, pretension, bolt length, and spacing, and a systematic numerical experiment was performed in this paper. The distribution characteristics of the stress field in the surrounding rock, which corresponded to various anchoring scenarios, were obtained. Furthermore, an analytical approach for computing the active and passive strengthening index of the anchored surrounding rock is presented. A new fully anchoring method with pretension and matching technology are also provided. Then, an isolated loading model of the anchored surrounding rock was constructed. The physical simulation test for the bearing capacity of the model was performed with three schemes. Finally, the strengthening mechanism of varying anchoring methods was validated. The research findings in this paper may provide theoretical guidelines for the design and construction of bolting support in tunnels.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.429-436
• /
• 2013

This study considers how the fatigue behavior and probabilistic properties of SAE1055 steel are related to its hardness level. SAE1055 steel was heat-treated using induction hardening. Five types of specimens were prepared (A: base material, B: through hardened material with HV390, C: through hardened material with HV510, D: through hardened material with HV700, and E: surface hardened material with HV700). Fatigue tests were performed under a stress ratio of R = -1 using a 4-point rotary bending fatigue tester. The fatigue behaviors were greatly influenced by the hardness, but the fatigue limit did not increase over a hardness of HV510. In addition, the effect of the hardness level on the failure mechanism was evaluated using a scanning electron microscope. The probabilistic properties of the fatigue life were investigated using a probabilistic S-N approach, and the effect of the hardness level on these properties was evaluated using a residue analysis.

• Journal of Oriental Neuropsychiatry
• /
• v.35 no.1
• /
• pp.15-26
• /
• 2024

Objectives: The objective of this study is to develop a specialized clinical research protocol for acupuncture treatment specifically designed for disaster survivors based on insights from an expert survey. Methods: An expert panel comprising specialists in neuropsychiatry, acupuncture, and clinical research methodology was assembled. Initial data to inform the clinical research protocol design was collected utilizing open-ended responses, multiple-choice questions, and a 5-point Likert scale to gauge agreement levels. Next, this data was disseminated to a panel of experts. A cohesive clinical research protocol was then formulated during a core panel meeting by integrating insights from a panel of 10 experts. Results: The protocol developed herein entails a non-randomized controlled study involving participants aged 19~64 years old who have been identified as high-risk or cautious according to the National Trauma Center screening test. The study design includes the establishment of an active control group, which allows for the assessment of an additional effect through comparison with conventional therapy. The selected acupuncture approach involves a combination of manual acupuncture and ear acupuncture. For clinical outcome assessment, the Clinician-Administered Posttraumatic Stress Disorder Scale for DSM-5 was proposed to gauge trauma symptoms. Representative scales for various domains such as depression, anxiety, anger, insomnia, pain, and quality of life were also provided for reference. Conclusions: The developed protocol is anticipated to streamline the swift design and initiation of clinical trials during disaster scenarios. It is also designed to be scalable, thereby enabling its application in both non-randomized control group studies and single-group before-and-after comparisons.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.2
• /
• pp.73-82
• /
• 2022

The study presents a three-dimensional approach to simulate the nonlinear behavior of a 72 m long Ultra High Performance Fiber Reinforced Concrete (UHPFRC) pre-stressed box girder for a pedestrian bridge in Busan, South Korea. The concrete damage plasticity (CDP) model is adopted to model the non-linear behavior of the UHPFRC material, in which the material properties are obtained from uniaxial compressive and tensile tests. The simulation model based on the proposed stress-strain curve is validated by the results of four-point bending model tests of a 50 m UHPFRC pre-stressed box girder. The results from the simulation models agree with the experimental observations and predict the flexural behavior of the 50 m UHPFRC pre-stressed box girder accurately. Afterward, the validated model is utilized to investigate the flexural behavior of the 72 m UHPFRC pre-stressed box girder. Here, the load-deflection curve, stress status of the girder at various load levels, and connection details is analyzed. The load-deflection curve is also compared with design load to demonstrate the great benefit of the slender UHPFRC box girder. The obtained results demonstrate the applicability of the nonlinear finite element method as an appropriate option to analyze the flexural behavior of pre-stressed long-span girders.

• (The)Korea Educational Review
• /
• v.23 no.4
• /
• pp.53-77
• /
• 2017

This paper suggests that the meaning and the direction of character education should be understood and approached from a point of view which human formation is regarded as the essence of education. The best way of approach to the character education with this point of view could start from the teachers' character, because teachers are key actors for character formation of students. This study therefore places strong emphasis on the importance of teachers' character and suggesting liberal education, as a key solution, its aim is raising and developing the whole human being. The purpose of this study is to explore the possibility of liberal teacher education. With this purpose of study, the author argues the moral dimension of teaching and the importance of the teachers' role as a character builder in ch.II. In ch.III, the present state of teachers' character education is examined and is argued the necessity of liberal perspective for teacher education to stress the character formation of teachers. The liberal teacher education means that the teacher education is integrated into the quality of liberal education which emphasizes the whole human formation, transformation of personality and critical reflection for human formation. The ch. IV contains exploration of the possibility of liberal teacher education by discussing the compatibility between liberal education and vocational education. Furthermore, it covers how teacher education can reflect the quality of liberal education on the aim of teaching, contents and methods of teacher education concretely.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.245-256
• /
• 2000

A moment-curvature relationship to simulate the behavior of reinforced concrete beam under cyclic loading is introduced. Unlike previous moment-curvature models and the layered section approach, the proposed model takes into consideration the bond-slip effect by using monotonic moment-curvature relationship constructed on the basis of the bond-slip relation and corresponding equilibrium equation at each nodal point. In addition, the use of curved unloading and reloading branches inferred from the stress-strain relation of steel gives more exact numerical result. The advantages of the proposed model, comparing to layered section approach, may be on the reduction in calculation time and memory space in case of its application to large structures. The modification of the moment-curvature relation to reflect the fixed-end rotation and pinching effect is also introduced. Finally, correlation studies between analytical results and experimental studies are conducted to establish the validity of the proposed model.

• Journal of Korean Public Health Nursing
• /
• v.13 no.1
• /
• pp.97-113
• /
• 1999

To investigate the actual condition of the adult-smoking in Chinan County. I used self-reporting questionnaires among 923 residents living in nine districts selected at random among the sites of eleven eup-myons from December 28. 1998 to January 6. 1999. collected data and analyized using SPSS. The smoking rate of adults in Chinan County was $36.9\%$. There was a significant difference in smoking rate according to the age. gender, education and job among general characteristics. The smoking rate in group of above 40s was about $40\%$ and that of the male took $55.5\%$ which was higher than that of female and the smoking rate of the people having high-school education was the highest$(46.2\%)$. With regard to the career. the smoking rate of the farmers ranked first$(46.1\%)$. Therefore anti-smoking business for smokers should be focused on above 40 years old, males. people having high school education and farmers. As the result of the survey of smoking habits of 340 people who smoke currently, the average smoking begining age was 21.8 and $81.5\%$ among them was between 16-25 years old. $4.4\%$ was under 15. during around the elementary school. Most motives to smoke were as followed; curiosity or taste$(33.6\%)$, relief of stress $(31.2\%)$, peer presure$(26.5\%)$ And considering the amount of the cigarette which is smoked per day, the case which is less than a pack of cigarettes was highest as $75.5\%$ and the people who smoke over one pack of cigarettes took $24.5\%$. As for the kind of tobacco which is smoked, how to smoke and the desire for the smoking, most case was toxin was moderate$(47.8\%)$ or mild$(46.9\%)$. shallowly$(49.0\%)$ or deeply$(46.3\%)$ and under stress$(33.4\%)$. after meals$(27.8\%)$, during drink$(15.7\%)$ and so on. The highest point marked among the factors of smoking motives was 'the reduce of negative emotion' $(3.27\pm1.00)$. followed by 'uncomfortable habits' $(2.87\pm1.02)$, 'addiction' $(2.84\pm1.06)$. 'habit' $(2.74\pm1.12)$. 'pleasure' $(2.70\pm1.04)$. 'stimulus' $(2.59\pm.90)$, 'sensation-exercise satisfaction' $(2.42\pm.97)$. Smokers smoke to reduce the negative emotions when angry in most common case. depressed. anxious. uncomfortable. lone. ashamed or embarrased. and intend to solve the certain problem. etc. Other motives are uncomfortable habit. addiction. habit. pleasure and the pursuit of stimulus. The level of nicotine dependence of adults m Chinan County was 10.57 which amount to 'high' wholly. As the resulf of the level of nicotine dependence score. the people who are low in the level of nicotine was $33.5\%$. the people who are high was $48.2\%$. very high was $18.4\%$. The approach for anti-smoking for smokers should be conducted differently according to the level of the nicotine. For the people who are in low level of nicotin dependence the prohibition of the smoking should be guided through the approach to foster strong will. for those who are in 'high' by acquiring proper method for the prohibition of smoking. and for those who are 'very high' the anti-smoking should be induced by providing proper program because of the possibility of the suffer from abstinence syndrome. The difference of the level of nicotine with the general characteristics of the objects had not statistically significant difference. The difference of the level of nicotine dependence accompanied by smoking habit had statistically significant difference according to the amount of smoke, the kind of tobacos. smoke inhale habit. In other words, the group of heavy smokers had higher level of the nicotine dependence than that of the light smokers relatively and the group which smoke strong taboaco has higher level of nicotine than that of which smoke mild or moderate. And the group of smokers who smoke deeply has higher level of nicotine than that who smoke shallowly or nonswallow. Aa a result of the analysis of the correlation between smoking motive factors and the level of nicotine, there was the indication that people who smoke for the decrease of the negative emotion. habit, pleasure. stimulus. sensation-exercise satisfaction had high level of the nicotine dependence. As the result of the anti-smoking will of smokers. $65.0\%$ of them had prohibition of smoking will. $29.3\%$ had no will to quit smoke. The most important reason for anti-smoking was health. $67.9\%$ had experience to try to quit smoke and the biggest reason to fail to quit smoking was the lack of the will power to keep anti-smoking. $52.8\%$ of them were advised to stop smoking from their spouses or children. only $2.8\%$ were by medical. The people who have the opinion to need anti-smoking education were $69.6\%$. Therefore when the business for the hygine of the mouth for adult is set. it should be centered on the people who have intention of prohibition of the smoking and help to quit smoking by way of other affirmative counter-program not smoking under stress.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.7 no.2
• /
• pp.128-134
• /
• 2008

Purpose: We prospectively evaluated the clinical usefulness of the patellar inferior pole (PIP) as a landmark of the anteromedial (AM) portal for the arthroscopic surgery of the medial mensiscus posterior horn (MMPH). Materials and Methods: Group 1 (50 normal left knees of adults), Group 2 (10 normal knees under anesthesia), and Group 3 (50 consecutive knees undergoing elective arthroscopic surgery for relatively simple intraarticular pathologies, or diagnostic arthroscopy) were included. In Group 1 and 2, the true lateral (A) and valgus stress lateral radiographs (B) on $30^{\circ}$ flexion were obtained, and the lines (AM portal line) passing through the PIP and distal-most medial femoral condyle (MFC) were drawn under the condition without considering the thickness of articular cartilage of MFC (1, 2-A, B group), and considering it as 2.5mm on B (1, 2-C group). Then, we investigated the meeting point of the AM portal line with medial tibial plateau (C-D percentage), and measured the distance between the PIP and the anterior joint line (E-length), and medial tibial-femoral joint space (F-length). In Group 3, the AM portal was made at the PIP level and clinical usefulness of the approach to the MMPH and body of the lateral meniscus (LM) was analyzed. Results: The average C-D percentage came out as 85.8, 101.3, 69.1% for each Group 1-A, B, C, and 102.4, 144.6, 116.8% for each Group 2-A, B, C. Measured E-length was an average of 15.1 (Group 1-A), 15.5 (Group 1-B, C), 13.1 (Group 2-A), and 12.9 mm (Group 2-B, C) and the change by valgus stress had no statistical significance. The F-length increased about 1.2 (Group 1) and 3.6 mm (Group 2) when valgus stress was applied, which had statistical significance (p<0.001, p<0.001). In Group 3, 49, 48 knees were classified as good for the MMPH, and the body of LM in aspect of the clinical usefulness of AM portal made on the PIP level. Conclusion: We identified the clinical usefulness of the PIP as a skin landmark of AM portal for the arthroscopic surgery of the MMPH.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.152-161
• /
• 2023

In general, large-capacity hydrogen storage vessels, typically in the form of vertical cylindrical vessels, are constructed using steel materials. These vessels are anchored to foundation slabs that are specially designed to suit the environmental conditions. This anchoring method involves pre-installed anchors on top of the concrete foundation slab. However, it's important to note that such a design can result in concentrated stresses at the anchoring points when external forces, such as seismic events, are at play. This may lead to potential structural damage due to anchor and concrete damage. For this reason, in this study, it selected an vertical hydrogen storage vessel based on site observations and created a 3D finite element model. Artificial seismic motions made following the procedures specified in ICC-ES AC 156, as well as domestic recorded earthquakes with a magnitude greater than 5.0, were applied to analyze the structural behavior and performance of the target structures. Conducting experiments on a structure built to actual scale would be ideal, but due to practical constraints, it proved challenging to execute. Therefore, it opted for an analytical approach to assess the safety of the target structure. Regarding the structural response characteristics, the acceleration induced by seismic motion was observed to amplify by approximately ten times compared to the input seismic motions. Additionally, there was a tendency for a decrease in amplification as the response acceleration was transmitted to the point where the centre of gravity is located. For the vulnerable components, specifically the sub-system (support columns and anchorages), the stress levels were found to satisfy the allowable stress criteria. However, the concrete's tensile strength exhibited only about a 5% margin of safety compared to the allowable stress. This indicates the need for mitigation strategies in addressing these concerns. Based on the research findings presented in this paper, it is anticipated that predictable load information for the design of storage vessels required for future shaking table tests will be provided.