• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.4
• /
• pp.443-451
• /
• 2007

The improvement of stiffness by the increase of thickness of deck plate or the reinforcement of longitudinal rib is one method among the effective methods to control fatigue damages occurring in orthotropic steel deck. It is likely that the increase of stiffness is effective to restrain local deformation caused by axial load in the steel deck. Therefore, in this study, the parameter studies for the reinforced structural details such as the bulk-head plate and vertical rib which is established to reduce the resultant stresses in the connection parts of the longitudinal rib and floor beam were performed with FE analysis. From the results, it was known that the reinforced structural detail with the bulk-head plate in the longitudinal ribs reduced overall the principal stresses at the connection parts, but the stress concentration increased in the weld toe parts which are occurring fatigue cracks. Also, it was estimated that the reinforced structural detail with the vortical rib in the longitudinal ribs because of the reduction of stress concentration in the weld toe parts is more effective details than the bulk-head plate.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.5 no.1
• /
• pp.39-57
• /
• 1999

Essential hypertension is a typical chronic disease requiring adequate and continuous management. And many studies supported that self-care was the essential factor to promote the wellbeing. The purpose of this study is to identify and understand the behavior patterns of self-care in hypertensives. As a research method, 35 Q-statements were collected through Individual interviews and review of the related literatures. 21 subjects were interviewed and the data were analyzed by the PC QUANL program with principal component analysis. There were 6 different self-care types classified as follows 1) Type 1 was the self-oriented control type, monitoring the blood pressure and taking the low salt diet. But they didn't take the anti -hypertensive drug and visit the health agency regularly. 2) Type 2 was the stress-control type. Their main activities were meditation to relieve the stress and communication with family. 3) Type 3 was called daily-life control type. This type tried to make their mind comfort and think positively. They also preferred walking and exercise regularly. 4) Type 4 was the medical-oriented control type, taking the anti-hypertensive drug, visiting the medical personnel and following the medical regimens. 5) Type 5 was the medication-oriented type. They only took the anti -hypertensive drug regularly and didn't any other self-care like as monitoring the blood pressure, taking the low salt diet and exercise. 6) Type 6 was called non-medication control type. This type had no medication, but tried to visit the health agency and health personnel. From the above results, it can be concluded that the self-care types were very various and self-care education have to provide individually according to the characteristics of self-care type. Another repeated study can be recommended to improve the nursing intervention the self-care behavior in chronic patient like as diabetics or rheumatoid arthritis.

• Geomechanics and Engineering
• /
• v.4 no.4
• /
• pp.281-294
• /
• 2012

Filtration using granular media such as quarried sand, anthracite and granular activated carbon is a well-known technique used in both water and wastewater treatment. A relatively new pre-filtration method called pebble matrix filtration (PMF) technology has been proved effective in treating high turbidity water during heavy rain periods that occur in many parts of the world. Sand and pebbles are the principal filter media used in PMF laboratory and pilot field trials conducted in the UK, Papua New Guinea and Serbia. However during first full-scale trials at a water treatment plant in Sri Lanka in 2008, problems were encountered in sourcing the required uniform size and shape of pebbles due to cost, scarcity and Government regulations on pebble dredging. As an alternative to pebbles, hand-made clay pebbles (balls) were fired in a kiln and their performance evaluated for the sustainability of the PMF system. These clay balls within a filter bed are subjected to stresses due to self-weight and overburden, therefore, it is important that clay balls should be able to withstand these stresses in water saturated conditions. In this paper, experimentally determined physical properties including compression failure load (Uniaxial Compressive Strength) and tensile strength at failure (theoretical) of hand-made clay balls are described. Hand-made clay balls fired between the kiln temperatures of $875^{\circ}C$ to $960^{\circ}C$ gave failure loads of between 3.0 kN and 7.1 kN. In another test when clay balls were fired to $1250^{\circ}C$ the failure load was 35.0 kN compared to natural Scottish cobbles with an average failure load of 29.5 kN. The uniaxial compressive strength of clay balls obtained by experiment has been presented in terms of the tensile yield stress of clay balls. Based on the effective stress principle in soil mechanics, a method for the estimation of maximum theoretical load on clay balls used as filter media is proposed and compared with experimental failure loads.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.102-114
• /
• 2004

The present work has been developed the interpretation processor including the behavior of material failure and the separation phenomena under transient dynamic loading (the operation of explosive bolt) using AUTODYN V4.3, SoildWork 2003 and TrueGrid V2.1 programs. It has been demonstrated that the interpretation in ridge-cut explosive bolt under dynamic loading condition should be necessary to the appropriate failure model and the basic stress of bolt failure is the principal stress. The use of this interpretation processor developing the present work could be extensively helped to design the shape and the amount of explosives in the explosive bolt having a complex geometry. It is also proved that the interpretation processor approach is an accurate and effective analysis technique to evaluate the separation mechanism in explosive bolts.

• Molecular & Cellular Toxicology
• /
• v.5 no.4
• /
• pp.310-316
• /
• 2009

Some environmental chemicals have been shown to cause liver-toxicity as the result of bioaccumulation. Particularly, fungicides have been shown to cause varying degrees of hepatictoxicity and to disrupt steroid hormone homeostasis in in vivo models. The principal objective of this study was to evaluate the liver-toxic responses of environmental chemicals-in this case selected fungicides and parasiticides-in order to determine whether or not this agent differentially affected its toxicogenomic activities in hepatic tumor cell lines. To determine the gene expression profiles of 3 fungicides (triadimefon, myclobutanil, vinclozolin) and 1 parasiticide (dibutyl phthalate), we utilized a modified HazChem human array V2. Additionally, in order to observe the differential alterations in its time-dependent activities, we conducted two time (3 hr, 48 hr) exposures to the respective IC20 values of four chemicals. As a result, we analyzed the expression profiles of a total of 1638 genes, and we identified 70 positive significant genes and 144 negative significant genes using four fungicidic and parasiticidic chemicals, using SAM (Significant Analysis of Microarray) methods (q-value<0.5%). These genes were analyzed and identified as being related to apoptosis, stress responses, germ cell development, cofactor metabolism, and lipid metabolism in GO functions and pathways. Additionally, we found 120 genes among those time-dependently differentially expressed genes, using 1-way ANOVA (P-value<0.05). These genes were related to protein metabolism, stress responses, and positive regulation of apoptosis. These data support the conclusion that the four tested chemicals have common toxicogenomic effects and evidence respectively differential expression profiles according to exposure time.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.783-788
• /
• 2016

Agricultural management of paddy soil depends on the effects of soil microbial activities. The present study evaluated the soil microbial community of 25 paddy soils in Gyeongnam Province by fatty acid methyl ester (FAME). The average of microbial communities in paddy soils were 32.2% of total bacteria, 16.7% of Gram-negative bacteria, 12.9% of Gram-positive bacteria, 2.0% of actinomycetes, 14.9% of fungi, and 1.3% of arbuscular mycorrhizal fungi. The communities of total bacteria (34.9%) and Gram-negative bacteria (19.4%) in soils with $30{\sim}35g\;kg^{-1}$ of organic matter were significantly larger than those in soils with other organic matter levels. However, soils with $20{\sim}30g\;kg^{-1}$ of organic matter had significantly low ratio of cy17:0 to $16:1{\omega}7c$ and cy19:0 to $18:1{\omega}7c$ as compared with soils with $30{\sim}35g\;kg^{-1}$ of organic matter, indicating microbial stress decreased (p < 0.05). In principal component analyses of soil microbial communities, Gram-negative bacteria should be considered as a potential responsible factor for the obvious microbial community differentiation that was observed between the two different organic matter levels in paddy fields. Thus, soils containing $20{\sim}30g\;kg^{-1}$ of organic matter were responsible for strong effect on microbial biomass and stress in paddy fields.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.433-442
• /
• 2003

This paper presents a hypoplastic model for three-dimensional analysis of concrete structures under monotonic, cyclic, proportional and non-proportional loading. The constitutive model is based on the concept of equivalent uniaxial strains that allows the assumed orthotropic model to be described via three equivalent uniaxial stress-strain curves. The characteristics of these curves are obtained from the ultimate strength surface in the principal stress space based on the Willam-Warnke curve. A cap model is added to consider loading along or near the hydrostatic axis. The equivalent uniaxial curve is based on the Popovics and Saenz models. The post-peak behavior is adjusted to account for the effects of confinement and to describe the change in response from brittle to ductile as the lateral confinement increases. Correlation studies with available experimental tests are presented to demonstrate the model performance. Tests with monotonic loading on specimens under constant lateral confinement are considered first, followed by biaxial and triaxial tests with cyclic loads. The triaxial test example considers non-proportional loading.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2C
• /
• pp.117-123
• /
• 2008

Disturbed and undisturbed decomposed granite soils with different weathering degrees were extracted and analyzed through a series of tests (CD test, constant P test, etc.) to assess their dilatancy characteristics. Here, dilatancy refers to the volume change that takes place during shearing. As a result, the decomposed granite soil dilatancy impact increased the mean effective stress while concurrently lowering the water content in drained shear tests. In the case of undisturbed decomposed granite soil, which has a lower weathering degree, the water content increased at specific limits during the shearing process. A linear relationship of ${\Delta}V_d/V_1=D{\cdot}(({\sigma}_1-{\sigma}_3)-{\sigma}_c)/{{\sigma}_m}^{\prime}$ forms between shearing-induced volume change and principal stress variance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.12
• /
• pp.1762-1772
• /
• 2013

The objective of the current study was to determine the effect of pre-slaughter stress, season and breed on the activity of plasma creatine kinase (CK) and the quality of mutton. One hundred and seventy-three (173) castrated sheep from Dormer (DM), South African Mutton Merino (SAMM), Dorper (DP) and Blackhead Persian (BP) sheep breeds were used in the study. The animals were grouped according to age-groups as follows: Group 1 (6 to 8 months), Group 2 (9 to 12 months) and Group 3 (13 to 16 months). Blood samples were collected during exsanguinations using disposable vacutainer tubes for CK analysis. Representative samples of the Muscularis longissimuss thoracis et. lumborum (LTL) were collected from 84 castrated sheep, of different breeds (28 per breed) 24 h after slaughter. The following physico-chemical characteristics of mutton were determined; meat pH ($pH_{24}$), color ($L^*$, $a^*$ and $b^*$), thawing and cooking losses and Warner Braztler Shear Force (WBSF). The activity of plasma CK was significantly higher (p<0.001) in summer ($1,026.3{\pm}105.06$) and lower in winter ($723.3{\pm}77.75$). There were higher values for $L^*$ ($33.7{\pm}0.94$), $b^*$ ($11.5{\pm}0.48$) and WBSF ($29.5{\pm}1.46$) in summer season than in winter season; $L^*$ ($29.4{\pm}0.64$), $b^*$ ($10.2{\pm}0.33$) and WBSF ($21.2{\pm}0.99$). The activity of plasma CK was influenced by the type of breed with Dormer having the highest (p>0.001) levels ($1,358.6{\pm}191.08$) of CK. South African Mutton Merino had higher values for $pH_{24}$ ($5.9{\pm}0.06$), $L^*$ ($34.2{\pm}0.97$), $b^*$ ($12.2{\pm}0.50$) and WBSF ($26.8{\pm}1.51$) and Blackhead Persian had higher values ($35.5{\pm}2.17$) for cooking loss (CL%) than the other breeds. Computed Principal Component Analyses (PCA) on the activity of plasma CK and physico-chemical characteristics of mutton revealed no correlations between these variables. However, positive correlations were observed between $pH_{24}$, $L^*$, $a^*$, $b^*$, CL% and WBSF. Relationships between pre-slaughter stress, CK activity and physico-chemical characteristics of mutton were also observed. It was therefore concluded that although mutton quality and creatine kinase were not related, pre-slaughter stress, season and breed affected the activity of creatine kinase and mutton quality.

• Journal of the Korean GEO-environmental Society
• /
• v.1 no.1
• /
• pp.5-12
• /
• 2000

Mudstone, found Du-Ho Dong and around there in Po-Hang, is used as construction material. When it is exposed to the air and contacts with water, the strength is decreased rapidly and then it causes a lot of problems. In the field, clay soils with $K_o$ condition have anisotropic characteristics which behave differently according to the change of principal stress direction. In this study, $K_o$ consolidation is performed to make the completely weathered mudstone under the same conditions of construction place. Then, the triaxial compression test is performed at different shear velocity and anisotropy by sampling degree and the stress - strain behavior is shown the strain softening behavior. The stress - strain relationship from triaxial compression test is compared with the prediction value of Cam-clay model. From the results of tests, $K_o$ value decreases with the increase of sampling degree. Generally the behavior of $K_o$ consolidated specimen shows work-softening characteristic. The trend of behaviour of the measured is nearly to same to the predicted by Cam-clay model. But the measured value of deviator stress is very higher than the predicted. Therefore, Cam-clay model was not appropriate to the completely weathered mudstone consolidated with $K_o$ condition in Pohang region.