• 한국직업건강간호학회지
• /
• 제10권1호
• /
• pp.93-109
• /
• 2001

The purposes of this study are to identify stress and coping strategies of married working women. Data were collected from 185 married working women, living in the metropolitan area. The results were as follows: 1. Low family function and high occupational stress affected stress symptoms of married working women significantly, but type A personality was not related to the stress symptoms. 2. The more the married working women perceived stress symptoms, the more they utilized organizational coping strategies. 3. The women who used personal coping strategies effectively also used more effective organizational coping strategies. 4. Two paths were statistically significant : family function$\rightarrow$stress symptoms, occupational stress$\rightarrow$stress symptoms. But the others were not. Based on those results, the model was modified by adding four paths : A type personality$\rightarrow$personal coping strategies, occupational stress$\rightarrow$organizational coping strategies, personal coping strategies$\rightarrow$organizational coping strategies, organizational coping strategies$\rightarrow$stress symptoms. 5. The modified model produced a better fit than hypothetical model(GFI=0.9985, ACFI=0.9893, NFI=0.9920, NNFI=1.1330, RMSR=0.0030, PNFI=0.1984). In conclusion, the stress management for married working women needs to focus on both organizational coping strategies and personal coping strategies.

• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.703-723
• /
• 2015

In this paper optimization of volume fraction distribution in a thick hollow cylinder with finite length made of two-dimensional functionally graded material (2D-FGM) and subjected to steady state thermal and mechanical loadings is considered. The finite element method with graded material properties within each element (graded finite elements) is used to model the structure. Volume fractions of constituent materials on a finite number of design points are taken as design variables and the volume fractions at any arbitrary point in the cylinder are obtained via cubic spline interpolation functions. The objective function selected as having the normalized effective stress equal to one at all points that leads to a uniform stress distribution in the structure. Genetic Algorithm jointed with interior penalty-function method for implementing constraints is effectively employed to find the global solution of the optimization problem. Obtained results indicates that by using the uniform distribution of normalized effective stress as objective function, considerably more efficient usage of materials can be achieved compared with the power law volume fraction distribution. Also considering uniform distribution of safety factor as design criteria instead of minimizing peak effective stress affects remarkably the optimum volume fractions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.379-380
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.319-320
• /
• 2009

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1115-1122
• /
• 1993

Several yield criteria for porous materials are compared with each other, defining the apparent yield stress as the yield stress of the porous material in simple compression. It was found that the plastic Poisson's ratio is the parameter needed to define the yield criterion, rather than the relative density. The plastic Poisson's ratio is regarded as a material characteristic that is obtained from a simple compression test. A new form of yield criterion was suggested, and it was applied to hydrostatic compression as well as uniaxial strain compression of sintered Al-2024 powder. The crossover point in the mean stress vs volume change curves of the processes was predicted. It is presented that the flow stress of the fully densed material can be obtained from that of the porous material using relations obtained from the yield criterion.

• Journal of the Korean Data and Information Science Society
• /
• 제20권6호
• /
• pp.1169-1175
• /
• 2009

In this paper, the inferences of data obtained from periodic inspection and type I censoring for the step-stress accelerated life test are studied. The exponential distribution with a failure rate function that a log-linear function of stress and the tampered failure rate model are considered. The maximum likelihood estimators of the model parameters are estimated and also the optimal stress change time which minimize the asymptotic variance of maximum likelihood estimators of parameters is determined. A numerical example will be given to illustrate the proposed inferential procedures and the sensitivity of the asymptotic variance of the estimated mean by the guessed parameters is investigated.

• Composites Research
• /
• 제12권4호
• /
• pp.1-7
• /
• 1999

비선형 하중/변위 거동을 나타내는 모재 지배 복합재료의 피로수명 예측을 이론과 실험에 의해 연구하였다. 재료의 비선형성을 고려하기 위해 초기 피로계수와 탄성계수의 관계를 나타내는 응력함수를 도입하였다. 피로계수와 참고계수 개념을 기반으로 하여 새로운 피로수명 예측식이 가한 하중 수위의 함수로 유도되었다. 예측 결과는 직교이방성 탄소섬유/에폭시 적층판을 사용한 원통형 시편의 비틀림 피로 실험과 비교되었으며, 제안된 식은 실험치와 잘 일치하였다.

• 한국기계가공학회지
• /
• 제10권4호
• /
• pp.38-43
• /
• 2011

Industrial reducer is in general use to Deck Crane. High-precision and high-efficient reducer is minimized the power-loss and energy-loss of a machine. So it contribute the price reduction and life extension. Reducer is usually using the Planetary gear reducer. Planetary gear reducer is composed the sun gear, planet gear, internal gear and casing. Industrial reducer's wear and breakage have a short-life. To solve this problem, it is using the profile-shifted-gear or tooth modification. This study was carried out the effect of addendum modification coefficient on tooth fillet bending strength to planetary reducer. Tooth fillet bending stress is calculate. And all parameter were expressed the function of addendum modification coefficient. And then stress concentration factor of tooth fillet curve was express the function of addendum modification coefficient using comparison between theory and finite element analysis.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.58-61
• /
• 1998

Anisotropy is closely related to the formability of sheet metal and should be considered carefully for more realistic analysis of actual sheet metal forming operations. In order to better describe anisotropic plastic properties of aluminum alloy sheets, a planar anisotropic yield function which accounts for the anisotropy of uniaxial yield stresses and strain rate ratios simultaneously was proposed recently[1]. This yield function was used in the finite element simulations of cup drawing tests for an aluminum alloy 2008-T4. Isotropic hardening with a fixed initial back stress based on experimental tensile and compressive test results was assumed in the simulation. The computation results were in very good agreement with the experimental results. It was shown that the initial back stress as well as the yield surface shape have a large influence on the prediction of the cup height profile.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2165-2171
• /
• 1997

The analysis model is the infinite power law creep material containing the rigid inclusion with crack shape. The present analysis is performed using the complex pseudo-stress function method. The strain rate intensity factor is developed as new fracture mechanics parameter which represents the stress and strain rate distribution near a crack tip in power law creep material. The strain rate intensity factor is developed in terms of Kolosoff stress functions.