• Reproductive and Developmental Biology
• /
• v.33 no.2
• /
• pp.99-105
• /
• 2009

Curcumin is a major active component of the food flovour tumeric. It has been used for the treatment of many diseases such as inflammatory and infectious diseases, cancer and other disease due to its antioxidant properties. Curcumin is a powerful scavenger of many free radicals such as superoxide anion, hydroxyl radical and nitric oxide. The objective of this study was to investigate the antioxidative effects of curcumin against hydrogen peroxide on semen quality during in vitro storage of boar semen. The sperm treated with different concentration of curcumin (1, 5 and 10 ${\mu}M$) in the presence or absence of hydrogen peroxide (250 ${\mu}M\;H_2O_2$) were incubated for 3, 6 and 9 hr at $37^{\circ}C$ and analyzed sperm characteristics such as motility, membrane integrity (MI), lipid peroxidation (LPO), reactive oxygen species (ROS) and DNA fragmentation (DF). The sperm motility and MI in $H_2O_2$ treated group ($47.8%{\pm}6.8$ and $24.8%{\pm}2.2$) were significantly decreased when compare to curcumin treated group ($79.8%{\pm}2.7$ and $34.6%{\pm}1.0$, respectively) irrespective of incubation periods(p<0.05). The LPO of spermatozoal plasma membrane was measured by thiobarbituric acid (TBA) reactions for malondialdehyde (MDA), MDA level in control ($11.6{\pm}0.6\;nmol/L{\times}10^6$) and curcumin groups ($10.7{\pm}0.3\;nmol/L{\times}10^6$) were lower than those of curcumin plus $H_2O_2$ ($17.1{\pm}0.8\;nmol/L{\times}10^6$) or $H_2O_2$ group ($22.5{\pm}1.9\;nmol/L{\times}10^6$) from 3 to 9 hr incubation periods. The DF by sperm chromatin dispersion (SCD) test and ROS production measured by 2',7'-dichlorofluorescein (DCF) fluorescence intensity were no significantly difference through all experimental groups (p>0.05). Correlation among evaluation methods for sperm quality, motility vs MI and DF vs ROS was positively correlated while motility vs DF and ROS vs LPO were negatively correlated in all treatment groups. These results demonstrate that curcumin can effectively improve the sperm quality during in vitro storage of boar semen through its hydrogen peroxide scavenging mechanism as an antioxidant.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.4 s.33
• /
• pp.55-59
• /
• 2004

We fabricates the $TiO_2$ thin film from anatase phase $TiO_2$ powder having good photocatalytic property using aerosol deposition method at room temperature. Aerosol deposition method, which sprays an aerosol powder with ultrasonic velocity and deposits a thin film on substrate at low temperature, has the advantages of low thermal stress and low cost. To fabricate the $TiO_2$ thin film, the aerosol bath pressure and chamber pressure were 500 torr and 0.4 torr, respectively. The difference of aerosol bath pressure and chamber pressure accelerated the $TiO_2$ nano powder to ultrasonic velocity through the nozzle of $0.4 mm{\times}10 mm$ and $TiO_2$ thin film was finally formed. SS mesh with diameter of 50 mm was used as a substrate to apply the $TiO_2$ thin film to water quality purification. The raw powder was dehydrated for the good dispersion of $TiO_2$ powder. To suppress the formation of second particle, the powder was dispersed for 90 min in alcohol bath by ultrasonic treatment and desiccated. The grain size of $1 {\mu}m$ was observed in $TiO_2$ thin film deposited on SUS mesh by scanning electron microscopy (SEM). The anatase phase of $TiO_2$ thin film was also observed by X-ray diffraction (XRD) and the anatase phase of raw powder was nicely maintained after aerosol deposition. The results are applicable to water treatment filter having photocatalytic reaction.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1995.10a
• /
• pp.15.2-22
• /
• 1995

Evaluating stiffness of near-surface materials has been one of the critically important tasks in many civil engineering works. It is the main goal of geotechnical characterization. The so-called deflection-response method evaluates the stiffness by measuring stress-strain behavior of the materials caused by static or dynamic load. This method, however, evaluates the overall stiffness and the stiffness variation with depth cannot be obtained. Furthermore, evaluation of a large-area geotechnical site by this method can be time-consuming, expensive, and damaging to many surface points of the site. Wave-propagation method, on the other hand, measures seismic velocities at different depths and stiffness profile (stiffness change with depth) can be obtained from the measured velocity data. The stiffness profile is often expressed by shear-wave (S-wave) velocity change with depth because S-wave velocity is proportional to the shear modulus. that is a direct indicator of stiffiiess. The crosshole and downhole method measures the seismic velocity by placing sources and receivers (geophones) at different depths in a borehole. Requirement of borehole installation makes this method also time-consuming, expensive, and damaging to the sites. Spectral-Analysis-of-Surface-Waves (SASW) method places both source and receivers at the surface, and records horizontally-propagating surface waves. Based upon the theory of surfacewave dispersion, the seismic velocities at different depths are calculated by analyzing the recorded surface-wave data. This method can be nondestructive to the sites. However, because only two receivers are used, the method requires multiple measurements with different field setups and, therefore, the method often becomes time-consuming and labor-intensive. Furthermore. the inclusion of noise wavefields cannot be handled properly, and this may cause the results by this method inaccurate. When multi-channel recording method is employed during the measurement of surface-waves, there are several benefits. First, usually single measurement is enough because multiple number (twelve or more) of receivers are used. Second, noise inclusion can be detected by coherency checking on the multi-channel data and handled properly so that it does not decrease the accuracy of the result. Third, various kinds of multi-channel processing techniques can be applied to f1lter unwanted noise wavefields and also to analyze the surface-wavefields more accurately and efficiently. In this way, the accuracy of the result by the method can be significantly improved. Fourth, the entire system of source, receivers, and recording-processing device can be tied into one unit, and the unit can be pulled by a small vehicle, making the survey speed very fast. In all these senses, multi-channel recording of surface waves is best suited for a routine method for geotechnical characterization in most of civil engineering works.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.157-167
• /
• 2015

Cement composites subjected to high-velocity projectile shows local failure and it can be suppressed by improvement of flexural toughness with reinforcement of fiber. Therefore, researches on impact resistance performance of cement composites are in progress and a number of types of fiber reinforcement are being developed. Since bonding properties of fiber with matrix, specific surface area and numbers of fiber are different by fiber reinforcement type, mechanical properties of fiber reinforced cement composites and improvement of impact resistance performance need to be considered. In this study, improvement of flexural toughness and failure reduction effect by impact of high-velocity projectile have been evaluated according to fiber type by mixing steel fiber, polyamide, nylon and polyethylene which are have different shape and mechanical properties. As results, flexural toughness was improved by redistribution of stress and crack prevention with bridge effect of reinforced fibers, and scabbing by high-velocity impact was suppressed. Since it is possible to decrease scabbing limit thickness from impact energy, thickness can be thinner when it is applied to protection. Scabbing of steel fiber reinforced cement composites was occurred and it was observed that desquamation of partial fragment was suppressed by adhesion between fiber and matrix. Scabbing by high-velocity impact of synthetic fiber reinforced cement composites was decreased by microcrack, impact wave neutralization and energy dispersion with a large number of fibers.

• Journal of Adhesion and Interface
• /
• v.12 no.3
• /
• pp.88-93
• /
• 2011

Optimal dispersion and fabrication conditions of carbon nanotube (CNT) embedded in phenolic resin were determined by electrical resistance measurement; and interfacial property was investigated between plasma treated carbon fiber and CNT-phenolic composites by electro-micromechanical techniques. Wettability of carbon fiber was improved significantly after plasma treatment. Surface energies of carbon fiber and CNT-phenolic nanocomposites were measured using Wilhelmy plate technique. Since surface activation of carbon fiber, the advancing contact angle decreased from $65^{\circ}$ to $28^{\circ}$ after plasma treatment. It was consistent with static contact angle results of carbon fiber. Work of adhesion between plasma treated carbon fiber and CNT-phenolic nanocomposites was higher than that without modification. The interfacial shear strength (IFSS) and apparent modulus also increased with plasma treatment of carbon fiber.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.276-286
• /
• 2021

General high fluidity concrete is the area of high strength concrete with a high amount of cement to secure the required fluidity and workability. Since most of the concrete structures currently used have normal strength, there is a limit to the practical expansion and practicality of use. Thus it is necessary to develop normal strength-high fluidity concrete with low binders that can be used not only in general buildings but also in special buildings, and can greatly reduce construction time and save labor costs. This requires to develop and apply the polycarboxylate-based superplasticizer. In this study, PCE was prepared for each combination of starting materials(WR, HB, RT) and the rheological properties of cement paste were analyzed using ringflow cone and a rotary viscometer. As a result, when PCE with a combination of WR 80%, HB 6.5%, and RT 13.5% was applied, the yield stress can be minimized while securing the plastic viscosity at level of the normal strength. In addition, high fluidity due to the high dispersion effect was confirmed.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.615-627
• /
• 2021

The Baekildo fault, a dextral strike-slip fault developed in Baekil Island, Goheung-gun, controls the distribution of tuffaceous sandstone and lapilli tuff and shows a complex fracture system around it. In this study, we examined the spatial variation in the geometry and connectivity of the fracture system by using circular sampling and topological analysis based on a detailed fracture trace map. As a result, both intensity and connectivity of the fracture system are higher in tuffaceous sandstone than in lapilli tuff. Furthermore, the degree of the orientation dispersion, intensity, and average length of fracture sets vary depending on the along-strike variation in structural position in the tuffaceous sandstone. Notably, curved fractures abutting the fault at a high angle occur at a fault bend. Based on the detailed observation and analyses of the fracture system, we conclude as follows: (1) the high intensity of the fracture system in the tuffaceous sandstone is caused by the higher content of brittle minerals such as quartz and feldspar. (2) the connectivity of the fracture system gets higher with the increase in the diversity and average length of the fracture sets. Finally, (3) the fault bend with geometric irregularity is interpreted to concentrate and disturb the local stress leading to the curved fractures abutting the fault at a high angle. This contribution will provide important insight into various geologic and structural factors that control the development of fracture systems around faults.

• Korean Journal of Environmental Biology
• /
• v.41 no.1
• /
• pp.41-53
• /
• 2023

E171, a mixture of titanium dioxide, has been widely used as a food additive due to its whitening effect and low toxicity. However, it has been proven that E171 is no longer safe for public health. So far, there are insufficient studies on the toxic effects of E171 on organisms especially using standardized test methods. In this study, toxicity assessments of E171 to two aquatic species, water flea (Daphnia magna) and zebrafish (Danio rerio), were performed using modified standardized test methods based on the physicochemical properties of E171. The hydrodynamic diameter, polydispersity index, and turbiscan stability index (TSI) were measured to ensure the dispersion stability of E171 in exposure media during the test period. The EC₅₀ for immobilization of water flea was 141.7 mg L^-1 while zebrafish was not affected until 100 mg L^-1 of E171. Measurements of reactive oxygen species (ROS) and antioxidant enzyme activities confirmed that E171 induced oxidative stress, leading to the activation of superoxide dismutase and catalase in both water flea and zebrafish, although the expression of antioxidant enzyme genes differed between species. These results suggested the potential risk of E171 to aquatic organisms and provided toxicological insights into the impacts of E171 on the environment.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.2
• /
• pp.63-75
• /
• 2013

The Inner Port Phase 2 area of the Pyeongtaek-Dangjin Port is enclosed by a total of three permeable sea-walls, and the disposal site to the east of the Inner Port Phase 2 is also enclosed by two permeable sea-walls. The maximum tidal range measured in the Inner Port Phase 2 and in the disposal site in May 2010 is 4.70 and 2.32 m, respectively. It reaches up to 54 and 27%, respectively of 8.74 m measured simultaneously in the exterior. Regression formulas between the difference of hydraulic head and the rate of interior water volume change, are induced. A three-dimensional numerical hydrodynamic model for the Asan Bay is constructed incorporating a module to compute water discharge through the permeable sea-walls at each computation time step by employing the formulas. Hydrodynamics for the period from 13th to 27th May, 2010 is simulated by driving forces of real-time reconstructed tide with major five constituents($M_2$, $S_2$, $K_1$, $O_1$ and $N_2$) and freshwater discharges from Asan, Sapkyo, Namyang and Seokmoon Sea dikes. The skill scores of modeled mean high waters, mean sea levels and mean low waters are excellent to be 96 to 100% in the interior of permeable sea-walls. Compared with the results of simulation to obstruct the flow through the permeable sea-walls, the maximum current speed increases by 0.05 to 0.10 m/s along the main channel and by 0.1 to 0.2 m/s locally in the exterior of the Outer Sea-wall of Inner Port. The maximum bottom shear stress is also intensified by 0.1 to 0.4 $N/m^2$ in the main channel and by more than 0.4 $N/m^2$ locally around the arched Outer Sea-wall. The module developed to compute the flow through impermeable seawalls can be practically applied to simulate and predict the advection and dispersion of materials, the erosion or deposion of sediments, and the local scouring around coastal structures where large-scale permeable sea-walls are maintained.

• Journal of Korean Academy of Nursing
• /
• v.4 no.1
• /
• pp.1-21
• /
• 1974

A considerable change of the Korean nursing system has been made during the last decade not only in its philosophy but also in its function and structure to meet political and scientific need of the modern society. The main purpose of this study is to develope the new concept of comprehensive nursing care, both its Philosophy and ethics, as the basic of modern clinical nursing theory and practice. Comprehensive nursing care is the concept of human centered nursing care, and it helps a man to meet the basic physical, psychological, environmental, socioeconomic and teaching needs. It also helps him to help himself to meet these needs. This concept starts from the individualized nursing care and its ultimate goal is to improve a man to have a better position in his own community so that he may able to have a meaningful life. To accomplish this goal, an individualized nursing care plan as a nursing diagnosis and problem solving method should be set up for different patients with similar diagnosis to meet their needs, because each patient has a different social background. from this viewpoint, nursing is a science as well as abstruse humanity. The performance of comprehensive nursing care is a goal and issue of modern clinical nursing care. If nursing is a science and a profession for man, it should have ethics which recognize the dignity of man and offers infinite service voluntarily, and should be able to show leadership in carrying out the nursing responsibility. This leadership finds a person's potential and encourages him to utilize it. Such concepts should develop into a nursing ideology and this ideology should become a priority in comprehensive nursing care. The following statements are the conclusion of this study. 1) Modern nursing has been developed from disease centered nursing care to comprehensive nursing care based on humanity. The primary principle of nursing was to assist in the treatment of disease, but it has been changed to the professional nursing system independently. 2) The concept of nursing is one of continuous or endless scope of dispersion. It proves that nursing is grasping the professional responsibility to be able to coordinate scientific principles Patient health problems are according to scientific principles rather than adhering to nursing technical discipline as a daily work. 3) In chapter I and Ⅱ, the philosophy and ideology of nursing have been discussed and the flow of concept of clinical nursing and the rate of progress which emerges from naturalizing performance of the concept of comprehensive nursing in clinical nursing studied. The discussion developed the theory that a nurse should be to embody nursing ideas and objectives by establishing definite conviction of professions and study. 4) In chapter lil, nursing planning based on nursing diagnosis as a method to attain ideal nursing care for humanity with a definite idea of establishing philosophy of nursing was presented. 5) From the result of survey on patient needs about treatment and nursing, it was observed that all patient had emotional stress from unknown factors. Therefore it was concluded that nurses should not only educate the patient but also give them the opportunity to communicate freely their needs and anxieties. Furthermore complaints and doubts of the patient should be carefully noted and must be considered to meet these needs. 6) Patient teaching is the most important part of comprehensive nursing care. In chapter, Ⅲ, the important of patient teaching was emphasized by demonstrating the effect of patient teaching for diabetic patient. 7) In Chapter Ⅳ, from the result of the study on nurses attitudes to comprehensive nursing care, it was pointed that the evolution of nursing education and the establishment of a complete concept and value of comprehensive nursing was necessary.