• Computers and Concrete
• /
• 제14권2호
• /
• pp.109-125
• /
• 2014

The force transfer mechanism in positive moment continuity details for prestressed concrete girder bridges is investigated in this paper using a three-dimensional detailed finite element model. Positive moment reinforcement in the form of hairpin bars as recommended by the National Cooperative Highway Research Program Report No 519 is incorporated in the model. The cold construction joint that develops at the interface between girder ends and continuity diaphragms is also simulated via contact elements. The model is then subjected to the positive moment and corresponding shear forces that would develop over the service life of the bridge. The stress distribution in the continuity diaphragm and the axial force distribution in the hairpin bars are presented. It was found that due to the asymmetric configuration of the hairpin bars, asymmetric stress distribution develops at the continuity diaphragm, which can be exacerbated by other asymmetric factors such as skewed bridge configurations. It was also observed that when the joint is subjected to a positive moment, the tensile force is transferred from the girder end to the continuity diaphragm only through the hairpin bars due to the lack of contact between the both members at the construction joint. As a result, the stress distribution at girder ends was found to be concentrated around the hairpin bars influence area, rather than be resisted by the entire girder composite section. Finally, the results are used to develop an approach for estimating the cracking moment capacity at girder ends based on a proposed effective moment of inertia.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.123-127
• /
• 2001

Numerous PSC bridges are stregthened by the combined use of continuity of simple spans and addition of external prestressing. In this case prestressing sequences should be carefully checked due to the effect on the stress and camber of girders and slab. Various prestressing sequences were applied in this field test and measured values were analysed. This results show that preatressing sequences affact the stress and deflection of bridge members, so the prestressing sequence should be considered at the desist and construction stages of deteriorated bridges.

• Steel and Composite Structures
• /
• 제23권1호
• /
• pp.41-51
• /
• 2017

A $C^0$ FE model developed based on an efficient higher order zigzag theory is used for hygrothermal analysis of laminated composite plates. The $C^0$ FE model satisfies the inter-laminar shear stress continuity at the interfaces and zero transverse shear stress conditions at plate top and bottom. In this model the first derivatives of transverse displacement have been treated as independent variables to circumvent the problem of $C^1$ continuity associated with the above plate theory. In the present theory the above mentioned $C^0$ continuity of the present element is compensated in the stiffness matrix formulation by using penalty parameter approach. In order to avoid stress oscillations observed in the displacement based finite element, the stress field derived from temperature/moisture fields (initial strains) must be consistent with total strain field. Special steps are introduced by field consistent approach (e.g., sampling at gauss points) to compensate this problem. A nine noded $C^0$ continuous isoparametric element is used in the proposed FE model. Comparison of present numerical results with other existing solutions shows that the proposed FE model is efficient, accurate and free of locking.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1844-1851
• /
• 1997

Displacement fields and interface stresses are obtained by modifying the potential energy functional with a penalty function which enforces the continuity of stresses at the interface of two-materials. Based on the displacement field and the interface stresses, a new methodology to generate a continuous stress field over the entire domain including the interface of the dissimilar materials has been proposed by combining the L$^{2}$ projection method of stress-smoothing and the Loubignac's iterative method of improving the displacement field. Stress analysis was carried out on two examples which are made of highly dissimilar materials. As a result of the analysis, it is found that the proposed method provides improved continuity of the stress field over the entire domain as well as predicting accurate nodal stresses at the interface. In contrast, the conventional displacement-based finite element method provides significant stress discontinuties at the interfaces. In addition, it was found that the total strain energy evaluated from the improved continuous stress field converge to the exact value as increasing the number of iterations in the proposed method.

• 한국전산구조공학회논문집
• /
• 제30권6호
• /
• pp.515-522
• /
• 2017

본 논문에서는 2개 이상의 기하형상이 순응 또는 비순응 경계면에서 접합된 멀티패치 문제에 대한 아이소-지오메트릭 해석에 대해서 연구하였다. 패치 경계면에서 응력의 연속성을 표현하는 방법으로 Nitsche 방법론과 마스터-슬레이브 방법에 기반한 방법론에 대해서 지배방정식을 유도하고 아이소-지오메트릭 이산화를 수행하였다. 멀티패치 문제에 대해서 두 방법론의 차이점을 간단하게 비교하였으며, 후처리 과정에서 사용되는 NURBS 곡면 기반의 응력 복원법에 대해서 기술하였다. 수치예제에서 비순응 경계면을 가지는 멀티패치 빔 문제를 통해 Nitshce 방법론을 검증하였으며, 응력집중을 가지는 문제에서 소개된 두 방법론이 유사한 결과를 보이는 것을 확인하였다. 소개된 NURBS 곡면 기반의 응력 복원법을 후처리에서 도입할 경우 멀티패치 문제의 경계면에서 개선된 연속적인 응력을 보임을 알 수 있다.

• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.73-91
• /
• 2016

The use of box columns has been increased due to the rigidity in rigid orthogonal moment resisting frames. On the other hand, the installation and welding of necessary horizontal continuity plates inside the columns are both labor-consuming and costly tasks. Accordingly, in this paper, a new beam-to-box column connection by trapezoidal external stiffeners and horizontal bar mats is presented to provide seismic parameters. The proposed connection consists of eight external stiffeners in the level of beam flanges and five horizontal bar mats in Concrete Filled Tube (CFT) columns. The new connection effectively alleviates the stress concentration and moves the plastic hinge away from the column face by horizontal external stiffeners. In addition, the result shows that proposed connection has provided the required strength and rigidity of connection, so that the increased strength, 8.08% and rigidity, 3.01% are compared to connection with internal continuity plates, also the results indicate that this connection can offer appropriate ductility and energy dissipation capacity for its potential application in moment resisting frames in seismic region. As a result, the proposed connection can be a good alternative for connection with continuity plates.

• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.65-76
• /
• 1994

A higher-oder laminated plate theory including the effect of transverse shear deformation is developed to calculate the gross response and the detailed stress distribution. The theory satisfies the continuity condition of transverse shear stress, and accounts for parabolic variation of the transverse shear stresses through the thickness of each layer. Exact closed-ply laminates are obtained and the results are compared with three-dimensional elasticity solutions and a simple higher-order theory solutions. The results of the present work exhibit acceptable accuracy when compared to the three-dimensional elasticity solutions.

• 한국주거학회논문집
• /
• 제7권2호
• /
• pp.9-17
• /
• 1996

The Purpose of this study is to understand the relationship between residential environment and healthy behavior by examining the effect of environmental stress on psychology and physiology. With anxiety, the acute environmental stressor activates sympathy nerve system and the chonic environmental stressor activates the intenal secretion system because this stress induces depression. Thus, we could find that the continuity of these kinds of stresses brings the chronic disease.

• 임상간호연구
• /
• 제15권3호
• /
• pp.143-155
• /
• 2009

Purpose: This study was conducted to develop and evaluate the collaborate transitional care program for improving continuity of care in patients transferred to general wards from ICUs. Methods: 18 years and older who were hospitalized in adult intensive care units at A university affiliated medical center was recruited for the study. The experimental group for patients transferred from an ICU consisted of 33 patients and family caregivers; 34 patients and family caregivers for the control group. This study was utilized a quasi-experimental research design. The collaborative transitional care program was administered in transfer process. Data were collected two times by interviews, medical records, and telephone using questionnaires. Results: There were statistically significant differences between the two groups on relocation stress (p<.001), perceived health status (p<.001), satisfaction of caring (p=.011), physical domain (p=.022) and mental domain (p<.001) of the QOL. There were significant differences between the families of the two groups on burden (p<.001) and satisfaction of caring (p<.001). Conclusion: The collaborative transitional care programs administered in transfer process to general wards from an ICU have positive effects on patients and families' intrinsic and extrinsic factors. This program will be able to be utilized in clinical fields to improve continuity of care for patients and families between ICUs and general wards.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1702-1711
• /
• 1997

A numerical study for the number of terms of a power series stress function and the effect of hybrid element size on stress analysis around a hole in loaded orthotropic composites is presented. The hybrid method coupling experimental and/or theoretical inputs and complex variable formulations involving conformal mappings and analytical continuity is used to calculate tangential stress on the boundary of the hole in uniaxially loaded, finite width glass epoxy tensile plate. The tests are done by rarying the number of terms, element size and nodal locations on the external boundary of the hybrid region. The numerical results indicate that the hybrid method is accurate and powerful in both experimental and numerical stress analysis.