• The Korean Journal of Food And Nutrition
• /
• v.26 no.3
• /
• pp.565-572
• /
• 2013

This study was performed to optimize the processing conditions and to select the optimum species for colored sweet potato chips (Shinjami, Juhwangmi and Hayanmi varieties) baked by far-infrared radiation. Sweet potato chips were prepared by different slicing thickness (1~3 mm), concentration of sucrose solution for soaking (15~30%), blanching time (15~60 sec), baking temperature ($110{\sim}140^{\circ}C$) and baking time (23~31 min) through sensory evaluation and failure stress measurement. Optimal processing condition of sweet potato chips using Shinjami was determined to 1 mm, 20%, 45 sec, $120^{\circ}C$ and 31 min, and those using Juhwangmi was determined as 1 mm, 25%, 45 sec, $130^{\circ}C$ and 29 min. Sweet potato chips using Hayanmi was determined as 1 mm, 20%, 45 sec, $120^{\circ}C$ and 31 min, respectively. Free sugar content of sweet potato chips was higher in chips than in raw materials. In the sensory evaluation, appearance, sweet taste, hardness, and overall acceptance were higher in Juhwangmi than in the Shinjami and Hayanmi varieties. Overall acceptance, sugar content, b-value and failure stress were highly correlated among factors affecting the sensory characteristics (p<0.01). From the results of this study, Juhwangmi variety was selected for production of sweet potato chips.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.1-5
• /
• 2019

In this paper, the experimental study and finite elements analysis were conducted on homogeneous and dissimilar metals single lap-shear bonded joints to investigate the factor that affect the joint failure load. It was found that factors which have the significant effects on the failure load of the joint was stiffness of the adherends. And from experimental results, it can be confirmed that the failure load increases linearly with overlap length increases. And the failure load of dissimilar metal joints is approximately 1KN(10~17%) larger than homogeneous metal joints. In order to confirm this phenomenon, the stress distribution and strain distribution of the specimens were analyzed through the finite element analysis. The difference between homogeneous metals joints and dissimilar metals joints is that stress and strain in adhesive are concentrated at the end of the overlap zone close to aluminium which has lower rigidity than aluminium in case of dissimilar metals joints. From high rigidity of steel, the stress concentration in bonds are decreased and it cause increase of the failure strength at dissimilar metal joints.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.342-352
• /
• 2023

Ultra-violet (UV) light is one of abiotic stress factors and causes oxidative stress in plants, but a suitable level of UV radiation can be used to enhance the phytochemical content of plants. The accumulation of antioxidant phenolic compounds in UV-exposed plants may vary depending on the conditions of plant (species, cultivar, age, etc.) and UV (wavelength, energy, irradiation period, etc.). To date, however, little research has been conducted on how leaf thickness affects the pattern of phytochemical accumulation. In this study, we conducted an experiment to find out how the antioxidant phenolic content of kale (Brassica oleracea var. acephala) leaves with different thicknesses react to UV-A light. Kale seedlings were grown in a controlled growth chamber for four weeks under the following conditions: 20℃ temperature, 60% relative humidity, 12-hour photoperiod, light source (fluorescent lamp), and photosynthetic photon flux density of 121±10 µmol m^-2 s^-1. The kale plants were then transferred to two chambers with different CO₂ concentrations (382±3.2 and 1,027±11.7 µmol mol^-1), and grown for 10 days. After then, each group of kale plants were subjected to UV-A LED (275+285 nm at peak wavelength) light of 25.4 W m^-2 for 5 days. As a result, when kale plants with thickened leaves from treatment with high CO₂ were exposed to UV-A, they had lower UV sensitivity than thinner leaves. The Fv/Fm (maximum quantum yield on photosystem II) in the leaves of kale exposed to UV-A in a low-concentration CO₂ environment decreased abruptly and significantly immediately after UV treatment, but not in kale leaves exposed to UV-A in a high-concentration CO₂ environment. The accumulation pattern of total phenolic content, antioxidant capacity and individual phenolic compounds varied according to leaf thickness. In conclusion, this experiment suggests that the UV intensity should vary based on the leaf thickness (age etc.) during UV treatment for phytochemical enhancement.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.1
• /
• pp.57-65
• /
• 2005

This study was performed to investigate the effects of very low calorie diet (VLCD) using meal replacements that contain the wild grass extracts that are consisted of mainly Samul-tang ingredients on weight reduction and health promotion in the obese women (BMI$\geq$25 kg/$m^2$) for four weeks. Fifty six premenopausal women participated in this experiment. Each subject was either classified as part of the control group (C group, n=28) that consumed 3 regular meals a day or the meal replacement group (MR group, n=28) that consumed 1 regular meal and 2 meal replacements within 600 kcal/day. Anthropometric measurements, body composition, health related factors, and psychological factors were assessed before (the initial) and after (the 4$^{th}$ week) the study. Obesity was significantly decreased after the diet intervention. Anthropometric measurements such as weight, waist and hip circumference, and BMI and body composition such as body fat, and fat mass were significantly decreased in all groups after the diet intervention. Anthropometric measurements and body composition of the MR group were significantly decreased more than those of the C group. Serum total cholesterol was significantly decreased in the MR groups but not in the C group and serum triglyceride concentration was significantly decreased in all groups after the diet intervention. All the biochemical measurements were within normal ranges after the diet intervention. Psychological factors such as stress and depression were significantly decreased in two groups after the diet intervention. Therefore, VLCD using meal replacements is very effective for weight reduction in the obese premenopausal women.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.2
• /
• pp.113-123
• /
• 2020

Global climatic change and increasing climatic instability threaten crop productivity. Due to climatic change, drought stress is occurring more frequently in crop fields. In this study, we investigated the effect of treatment with hydrogen peroxide (H₂O₂) before leaf development on the growth and yield of sorghum for minimizing the damage of crops to drought. To assess the effect of H₂O₂ on the growth of sorghum plant, 10 mM H₂O₂ was used to treat sorghum leaves at the 3-leaf stage during growth in field conditions. Plant height, stem diameter, leaf length, and leaf width were increased by 7.6%, 9.6%, 8.3% and 11.5%, respectively. SPAD value, chlorophyll fluorescence (Fv/Fm), photosynthetic rate, stomatal conductance, and transpiration rate were increased by 3.0%, 4.9%, 26.0%, 23.4% and 12.7%, respectively. The amount of H₂O₂ in the leaf tissue of sorghum plant treated with 10 mM H₂O₂ was 0.7% of the applied amount after 1 hour. The level increased to approximately 1.0% after 6 hours. The highest antioxidant activity measured by the Oxygen Radical Absorbance Capacity assay was 847.3 µmol·g^-1 at 6 hour after treatment. However, in the well-watered condition, the concentration of H₂O₂ in the plant treated by the foliar application of H₂O₂ was 227.8 µmol·g^-1 higher than that of the untreated control. H₂O₂ treatment improved all the yield components and yield-related factors. Panicle length, plant dry weight, panicle weight, seed weight per plant, seed weight per unit area, and thousand seed weight were increased by 8.8%, 18.0%, 24.4%, 24.7%, 29.9% and 7.1%, respectively. Proteomic analysis showed that H₂O₂ treatment in sorghum increased the tolerance to drought stress and maintained growth and yield by ameliorating oxidative stress.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.11
• /
• pp.1533-1543
• /
• 2016

The anti-stress effects of Punica granatum L. (family Lythraceae, PG) on $H_2O_2$/corticosterone (CORT)-induced stress in cells and sleep-deprived rats were investigated. The PG extract showed neuroprotective effects in SH-SY5Y cells against $H_2O_2$/CORT-induced stress. Sleep deprivation led to behavioral, hormonal, and biochemical alterations in the animal model. The effects of P. granatum on physiological, behavioral, and biochemical parameters aggravated by sleep deprivation were investigated. Sleep deprivation impaired physiological (survival, body weight, and drowsiness scores) and behavioral (rotarod, passive avoidance, hot hyperalgesia, and Y maze) parameters as well as biochemical factors (cortisol, serotonin, dopamine, testosterone, and growth factor I contents in serum). These parameters were significantly recovered by PG extract in a concentration-dependent manner. The PG extract also enhanced catalase, superoxide dismutase, and non-enzymatic antioxidative activities such as glutathione compared to sleep-deprived rats. On the basis of these results, our findings suggest that Punica granatum prevents impairment of body functions induced by sleep deprivation and related oxidative damage.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.118-126
• /
• 2000

TMCP steel has been widely used to construct ships and offshore structures. When it comes to ship and offshore structures, corrosion fatigue damages caused by sea water and fatigue occurred by wave-induced forces usually go on occurring simultaneously. So the fatigue life in corrosion environment is decreased markedly in comparison with that in air. The fatigue crack in corrosion easily initiates on welded joints of structure like as the fatigue crack in air. Therefore it is very important to study the fatigue properties of those of their welded joints as well as steel plates. In this study, rotary bending fatigue tests have been performed to investigate fatigue crack initiation and behavior of fatigue crack growth on CO2 gas weld HAZ of TMCP steel. The fatigue test used the specimens with various stress concentration factors in air and 3% NaCl solution

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.2
• /
• pp.101-105
• /
• 2010

Silicon electrode and ring in a plasma etcher those are in contact with harsh plasma suffer from periodic heating and cooling during their lifetime. This causes the silicon components failure due to thermal stress remaining the persistent slip bands (PSBs) on their surfaces. The factors that determine the lifetime of silicon electrode and ring were discussed with respect to silicon ingot. The impurity level and the average defect concentration measured with glow discharge mass spectrometer (GDMS) and microwave photo-conductance decay (${\mu}$-PCD) were compared with the grade of silicon ingots those are divided to slip-free and slip-allowed ingot. Some silp-allowed samples showed planar defects along <110> direction on {001} surface. The role of these defects was suggested from the viewpoint of the lifetime of silicon components.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.3
• /
• pp.305-316
• /
• 2011

Cracked teeth are a common problem with incomplete fracture that typically shows pain on biting and temperature stimuli. The most common cause of crack is known to be the masticatory accident. Predisposing factors were aging, old restoration, and iatrogenic stress concentration, etc. Accurate diagnosis is needed for detecting the extent of crack and pulp vitality. There are many diagnostic tools like bite test, direct observation with transillumination, dye penetration, and radiographs. Immediate treatment for pain relief and occlusal adjustment would be needed. Composite resin and bonded amalgam showed favorable prognosis. Moreover, cusp protection is reliable permanent treatment for cracked teeth. The purpose of this article is to review the literature about the prevention, diagnosis, and treatment for cracked teeth.

• Molecules and Cells
• /
• v.28 no.6
• /
• pp.545-551
• /
• 2009

Mitogen-activated protein kinases (MAPK) affect the activation of activator protein-1 (AP-1), which plays an important role in regulating a range of cellular processes. However, the roles of these signaling factors on hydrogen peroxide ($H_2O_2$)-induced cell death are unclear. This study examined the effects of $H_2O_2$ on the activation of MAPK and AP-1 by exposing the cells to $H_2O_2$ generated by either glucose oxidase or a bolus addition. Exposing BJAB or Jurkat cells to $H_2O_2$ affected the activities of MAPK differently according to the method of $H_2O_2$ exposure. $H_2O_2$ increased the AP-1-DNA binding activity in these cells, where continuously generated $H_2O_2$ led to an increase in mainly the c-Fos, FosB and c-Jun proteins. The c-Jun-$NH_2$-terminal kinase (JNK)-mediated activation of c-Jun was shown to be related to the $H_2O_2$-induced cell death. However, the suppression of $H_2O_2$-induced oxidative stress by either JNK inhibitor or c-Jun specific antisense transfection was temporary in the cells exposed to glucose oxidase but not to a bolus $H_2O_2$. This was associated with the disruption of death signaling according to the severe and prolonged depletion of reduced glutathione. Overall, these results suggest that $H_2O_2$ may decide differently the mode of cell death by affecting the intracellular redox state of thiol-containing antioxidants, and this depends more closely on the duration exposed to $H_2O_2$ than the concentration of this agent.