• Food Science and Biotechnology
• /
• v.18 no.3
• /
• pp.610-617
• /
• 2009

The stability of corn oil-in-water emulsions coated by milk proteins, sodium caseinate (CAS), or whey protein concentrate (WPC), was compared under the environmental stress of pH change. Emulsions were prepared at 0.1 of protein:oil because the majority of droplets were relatively small ($d_{32}=0.34$ and $0.35\;{\mu}m$, $d_{43}=0.65$ and $0.37\;{\mu}m$ for CAS- and WPC-emulsions, respectively) and there was no evidence of depletion flocculation. As the pH of the emulsions was gradually dropped from 7 to 3, there was no significant difference in the electrical charges of the emulsion droplets between the 2 types of emulsions. However, laser diffraction measurements, microscopy measurements, and creaming stability test indicated that WPC-emulsions were more stable to droplet aggregation than CAS-emulsions under the same circumstance of pH change. It implies that factors other than electrostatic repulsion should contribute to the different magnitude of response to pH change.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.2
• /
• pp.183-190
• /
• 1994

To assess the effects of plant stress by light, temperature, NaCl and soil moisture on photosynthetic activity, the fluorescence method was used for Chinese cabbage(Brassica perkinensis Rupr.), strawberry(Fragaria grandiflora Ehrh.) and citrus tree(Citrus unshiu Marc.). With decreasing the light intensity, Fv/Fm ratios of intact leaves of Chinese cabbage and strawberry increased significantly, indicating lower photochemical efficiency in PS II system, resulting in an inverse relationship with the photosynthetic activity. Chinese cabbage and strawberry that were grown at higher temperature had higher Fv/Fm ratios and photosynthetic activities, while those given high concentration of NaCl and having low soil moisture had lower values. Chinese cabbage more resistant to salt stress and requiring more water had a greater Fv/Fm ratio than strawberry. In citrus tree, Fv/Fm ratio was lower in the non-irrigated group than the irrigated one. From these results, the fluorescence method was found to be a useful tool which can be used to assess the degree of in vivo stress induced by various environmental factors.

• Geomechanics and Engineering
• /
• v.25 no.3
• /
• pp.207-219
• /
• 2021

Several additives are used to enhance the geotechnical properties (e.g., shear wave velocity, shear modulus) of soils to provide sustainable, economical and eco-friendly solutions in geotechnical and geo-environmental engineering. In this study, piezoelectric ring actuators are used to measure the shear wave velocity of unreinforced, fiber, cemented, and fiber reinforced cemented Toyoura sand. One dimensional oedometer tests are performed on medium dense specimens of Toyoura sand-cement-fiber-silica flour mixtures with different percentages of silica flour (0-42%), fiber and cement (e.g., 0-3%) additives. The experimental results indicate that behavior of the mixtures is significantly affected by the concentration of silica flour, fiber and cement additives. Results show that with the addition of 1-3% of PVA fibers, the shear wave velocity increases by only 1-3%. However, the addition of 1-4% of cement increases the shear wave velocity by 8-35%. 10.5-21% increase of silica flour reduces the shear wave velocity by 2-5% but adding 28-42% silica flour significantly reduces the shear wave velocity by 12-31%. In addition, the combined effect of cement and fibers was also found and with only 2% cement and 1% fiber, the shear wave velocity increase was found to be approximately 24% and with only 3% cement and 3% fibers this increased to 35%. The results from this study for the normalized shear modulus and normalized mean effective stress agree well with previous findings on pure Toyoura sand, Toyoura silty sand, fiber reinforced, fiber reinforced cemented Toyoura sand. Any variations are likely due to the difference in stress history (i.e., isotropic versus anisotropic consolidation) and the measurement method. In addition, these small discrepancies could be attributed to several other factors. The potential factors include the difference in specimen sizes, test devices, methods of analysis for the measurement of arrival time, the use of an appropriate Ko to convert the vertical stresses into mean effective stress, and sample preparation techniques. Lastly, it was investigated that there is a robust inverse relationship between α factor and 𝞫₀ exponent. It was found that less compressible soils exhibit higher 𝜶 factors and lower 𝞫₀ exponents.

• Toxicological Research
• /
• v.34 no.2
• /
• pp.103-110
• /
• 2018

Environmental stimuli can lead to the excessive accumulation of reactive oxygen species (ROS), which is one of the risk factors for premature skin aging. Here, we investigated the protective effects of $7-MEGA^{TM}$ 500 (50% palmitoleic acid, 7-MEGA) against oxidative stress-induced cellular damage and its underlying therapeutic mechanisms in the HaCaT human skin keratinocyte cell line (HaCaT cells). Our results showed that treatment with 7-MEGA prior to hydrogen peroxide ($H_2O_2$)-induced damage significantly increased the viability of HaCaT cells. 7-MEGA effectively attenuated generation of $H_2O_2$-induced reactive oxygen species (ROS), and inhibited $H_2O_2$-induced inflammatory factors, such as prostaglandin $E_2$ ($PGE_2$), tumor necrosis $factor-{\alpha}$ ($TNF-{\alpha}$), and $interleukin-1{\beta}$ ($IL-1{\beta}$). In addition, cells treated with 7-MEGA exhibited significantly decreased expression of matrix metalloproteinase-1 (MMP-1) and increased expression of procollagen type 1 (PCOL1) and Elastin against oxidative stress by $H_2O_2$. Interestingly, these protective activities of 7-MEGA were similar in scope and of a higher magnitude than those seen with 98.5% palmitoleic acid (PA) obtained from Sigma when given at the same concentration (100 nL/mL). According to our data, 7-MEGA is able to protect HaCaT cells from $H_2O_2$-induced damage through inhibiting cellular oxidative stress and inflammation. Moreover, 7-MEGA may affect skin elasticity maintenance and improve skin wrinkles. These findings indicate that 7-MEGA may be useful as a food supplement for skin health.

• Journal of Sensor Science and Technology
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2000

One of today's very critical and sensitive accurate accelerometer which can be used higher temperature than $200^{\circ}C$ and corrosive environment, is particularly demanded for automotive engine. Because silicon is a material of large temperature dependent coefficient, and the piezoresistors are isolated with p-n junctions, and its leakage current increase with temperature, the performance of the silicon accelerometer degrades especially after $150^{\circ}C$. In this paper, The temperature characteristic of a accelerometer using silicon on insulator (SOI) structure is studied theoretically, and compared with experimental results. The temperature coefficients of sensitivity and offset voltage (TCS and TCO) are related to some factors such as thermal residual stress, and are expressed numerically. Thermal stress analysis of the accelerometer has also been carried out with the finite-element method(FEM) simulation program ANSYS. TCS of this accelerometer can be reduced to control the impurity concentration of piezoresistors, and TCO is related to factors such as process variation and thermal residual stress on the piezoresistors. In real packaging, The avarage thermal residual stress in the center support structure was estimated at around $3.7{\times}10^4Nm^{-2}^{\circ}C^{-1}$ at sensing resistor. The simulated ${\gamma}_{pT}$ of the center support structure was smaller than one-tenth as compared with that of the surrounding support structure.

• Journal of Nutrition and Health
• /
• v.54 no.4
• /
• pp.412-421
• /
• 2021

Purpose: Thioacetamide (TAA) produces reactive oxygen species (ROS) in the liver, and the generated ROS induces liver injury through inflammatory reactions. The current study was undertaken to investigate the hepatoprotective effect of Artemisiae Capillaris Herba water extract (AC), imparted via its antioxidant activity, in an animal model of TAA-induced liver injury. Methods: Animal experiments were conducted in 5 groups: normal, control (TAA 200 mg/kg), SM (TAA 200 mg/kg + silymarin 100 mg/kg), ACL (TAA 200 mg/kg + AC 100 mg/kg), ACH (TAA 200 mg/kg + AC 200mg/kg). TAA (intraperitoneal) and treatment compounds (per oral) were administered for 3 days. Serum levels of ammonia concentration and myeloperoxidase (MPO) activity were subsequently measured. Liver tissues were subjected to western blot analysis for measuring the oxidative stress (NADPH oxidase), anti-oxidative activity (Nrf2, heme oxygenase-1 [HO-1], superoxide dismutase [SOD], catalase, and GPx-1/2), tissue inhibitors of metalloproteinase (TIMP)-1, and matrix metalloproteinases (MMPs) protein expressions. Results: Serum ammonia levels and MPO activity were significantly increased in the TAA-induced control group, whereas groups administered AC treatment showed markedly reduced levels. Western blot analysis revealed significantly increased NOX2 and p22^phox expressions, (oxidative stress-related factors) in the TAA-induced control group. These levels were determined to be significantly decreased after AC exposure. Moreover, antioxidant-related factors including Nrf2, HO-1, SOD, catalase, and GPx-1/2 were significantly decreased in the control group and increased in the AC treated groups. In addition, MMP expressions were significantly suppressed in the AC treatment group due to increased levels of TIMP-1. Conclusion: Taken together, these data indicate that exposure to AC reduces the oxidative stress by inhibiting the expression of NADPH oxidase (NOX2 and p22^phox) through the Nrf2 signaling pathway. We therefore propose the potential of AC for the prevention and treatment of TAA-induced liver injury.

• The Korea Journal of Herbology
• /
• v.37 no.4
• /
• pp.31-38
• /
• 2022

Objectives : In this study, we investigated the synergistic protective effects of medicinal herbal mixture (HME) including Mori Ramulus (MR), Acanthopanacis Cortex (AC), Eucommiae Cortex (EC), and Black soybean (BS) in C2C12 cells, mouse myoblasts. Methods : Effects of HME on cell viability of C2C12 myoblasts were monitored by MTT assay. Anti-atrophic activity of HME was determined in myoblasts and myotubes under oxidative stress by H₂O₂. C2C12 myoblasts were differentiated into myotubes in a medium containing 2% horse serum for 6 days. After that, we measured that expression of MyoD and myogenine, the myogenic regulatory factors, to identify the mechanism of inhibiting muscle atophy after HME treatment. In addition, suppression of phosphorylation of Akt, FoxO3a and MARF-1, transcription factors of degradation proteins were analyzed via western blotting. Results : As a result of MTT, HME there was no show cytotoxicity up to a concentration of 1 mg/ml. The cytoprotective effects on oxidative stressed myoblast and myotube was better in HME extract than those of MR, AC, EU, and BS, respectively. HME treatment in Myotube induced by oxidative stress after H₂O₂ treatment increased Myo D, Myogenine activation, and Akt, FoxO3a phosphorylation and decreased expression of MuRF-1. As the results, HME has synergistic effects on protection against proteolysis of C2C12 myotubes through activation of the Akt signaling pathway under oxidative stress. Conclusions : These results suggest that HME may also be useful as a preventing and treating material for skeletal muscle atrophy caused by age-related diseases.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.393-404
• /
• 2018

The tunnel can be planned to connect to underground roadway and surface road. The large tunnel and branch section are made when the ramp tunnel access to the main tunnel. In the branch section, stress concentration can be assigned and it can be very important for the stability of the tunnel. This study assessed the behavior of rock pillar in double deck tunnel diverging area by using a two dimensional numerical analysis. This study evaluated different safety factors according to pillar width and the ramp tunnel position in branch. By the assessment of the strength-stress ratio, tunnel pillar width is suggested in order to secure the safety factor 1.5.

• Korean Journal of Weed Science
• /
• v.5 no.2
• /
• pp.103-108
• /
• 1985

A series of experiments were conducted to determine the effect of pH, salinity, seeding depth, and moisture stress on the germination and growth of Echinochloa colons (L.) Link. Germination significantly decreased at pH 10, but shoot lengths were not affected by the pH tested. Germination was not affected by salt concentrations of up to 0.1%, but was significantly reduced at 0.5%. A 1.0% salt concentration did not significantly reduce shoot length. Increase in seeding depth significantly reduced emergence. Irrespective of seeding depth, the coleoptilar node was always just below the soil surface. Delayed and decreased germination was obtained at -4.6 bars of simulated water potential, while no germination occurred at -9.8 bars. Soil moisture stress significantly reduced plant height, delayed panicle initiation, and reduced seed production.

• Design & Manufacturing
• /
• v.13 no.3
• /
• pp.12-18
• /
• 2019

Fluid jet polishing is a method of jetting a fluid to polish a concave or free-form surface. However, the fluid jet method is difficult to form a stable polishing spot because of the lack of concentration. In order to solve this problem, MR fluid jet polishing system using an abrasive mixed with an MR fluid whose viscosity changes according to the intensity of a magnetic field is under study. MR fluid jet polishing is not easy to formulate for precise optimal conditions and material removal due to numerous fluid compositions and process conditions. Therefore, in this paper, quantitative data on the factors that have significant influence on the machining conditions are presented using various simulations and the correlation studies are conducted. In order to verify applicability of the fabricated MR fluid jet polishing system by nozzle diameter, the flow pattern and velocity distribution of MR fluid and polishing slurry of MR fluid jet polishing were analyzed by flow analysis and shear stress due to magnetic field changes was analyzed. The MR fluid of the MR fluid jet polishing and the flow pattern and velocity distribution of the polishing slurry were analyzed according to the nozzle diameter and the effects of nozzle diameter on the polishing effect were discussed. The analysis showed that the maximum shear stress was 0.45 mm at the diameter of 0.5 mm, 0.73 mm at 1.0 mm, and 1.24 mm at 1.5 mm. The cross-sectional shape is symmetrical and smooth W-shape is generated, which is consistent with typical fluid spray polishing result. Therefore, it was confirmed that the high-quality surface polishing process can be stably performed using the developed system.