• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.3
• /
• pp.19-26
• /
• 2001

In order to investigate the effect of single tensile overload on the short crack growth behavior under the out-of-plane cyclic bending moment, crack opening stresses were continuously measured by an elastic compliance method using strain gages. The characteristics of short crack growth after the single tensile overload are analyzed by the effective stress range ratio. Futhermore, the investigation was carried out with respect to various fatigue crack growth behaviors such as the plastic zone size effect on crack retardation, the retarded crack length and the number of cycles.

• Journal of Nutrition and Health
• /
• v.25 no.5
• /
• pp.397-403
• /
• 1992

This study was performed to investigate the effect of dietary magenesium on stress reactions in rats having abdominal surgery. Sixty three male rats of sprague-dawley strain were blocked into 3 groups : rats fed regular magnesium (0.05% Mg: control) rats receiving regular magnesium with surgery(Mg-adeq : S) Five weeks after feeding abdominal surgery was performed and randomly chosen 7 rats from each group were sacrificed on 1, 3 and 5 days after surgery. Te following were found ; 1) Rats fed marginal magnesium showed significantly elevated urinary urea nitrogen urinary potassium and plasma glucose compared controls only one day after abdominal surgery but not 3 days or 5 days after surgery 2) Rats fed adequate magnesium did not show any significant change in metabolic stress indicator after surgery. 3) Plasma free fatty acid and cortisol level were not different among groups. 4) Decreased plasma magnesium and potassium level were found in rats fed marginal magne-sium and sacrificed one day and three days after surgery.

• Computers and Concrete
• /
• v.3 no.4
• /
• pp.261-284
• /
• 2006

The flexural behaviour of symmetrically reinforced concrete (RC) columns cast of normal- and high-strength concrete under both monotonic and cyclic loading is studied based on an analytical procedure, which employs the actual stress-strain curves and takes into account the stress-path dependence of concrete and steel reinforcement. The analysis is particularly extended into the post-peak stage with large inelastic deformation at various applied axial load level. The effect of axial load on their complete flexural behaviour is then identified based on the results obtained. The axial load is found to have fairly large effect on the flexural behaviour of RC columns under both monotonic and cyclic loading. Such effects are discussed through examination of various aspects including the moment-curvature relationship, moment capacity, flexural ductility, variation of neutral axis depth and steel stress.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.444-447
• /
• 2019

It was proven that the light outputs of blue GaN-based light-emitting diodes (LEDs) was seriously influenced by the application of external stress. We have simulated the wave function overlap of an electron and hole, which are significantly reduced by the development of stress. Consequently, its internal quantum efficiency decreased from 67.0% to 37.5%. To experimentally investigate the effect of stress, we designed and prepared a special zig system. By applying external tensile stress to compensate for the compressive stress innately developed in Blue LEDs, it was found that the optical output was greatly enhanced from 83.1 mcd to 117.2 mcd at a current of 100 mA, an increase of approximately 41%. In contrast, when the compressive stress is developed more by external compressive stress, we observed that the light output power was reduced from 89.0 mcd to 80.7 mcd, a decrease of approximately 9.3%.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.482-485
• /
• 2006

The response of a reinforced concrete element under cyclic shear is characterized by the hysteretic loops of the shear stress-strain curves. These hysteretic loops can exhibit strength deterioration, stiffness degradation, and a pinched shape. Recent tests have shown that the orientation of steel grids in RC shear elements has a strong effect on the "pinching effect" in the post-yield hysteretic loops. When the steel grid was set at a 45 degree angle to the shear plane, there was no pinching effect and no strength deterioration. However, when the steel grid was set parallel to the shear plane, there was a severe pinching effect and severe strength deterioration with increasing shear strain magnitude. In this paper, two RC elements subjected to revered cyclic shear stresses are considered to study the effect of the steel grid orientation. The presence and absence of the pinching mechanism in the post-yield shear hysteretic loops is studied using the Rotating Angle Softened Truss Model (RA-STM) theory.

• Child Health Nursing Research
• /
• v.5 no.1
• /
• pp.70-83
• /
• 1999

The birth of a premature infant is distressing for its parents. The parents of a premature infant experience stress according to the infant's physical appearance and behavior, the environment of the neonatal intensive care unit (NICU) , and the alteration in the parental role. Especially, a mother of a premature infant feels distressed even after the discharge of the infant : therefore, she has difficulties in maternal role performance. The main purpose of this study is to identify the effects of the planned infant care information program in order to lower the stress level for mothers of premature infants caused by the birth and hospitalization in NICU of premature infants, to reduce the maternal role strain, and to promote the maternal role performance after the infants' discharge. This study employed two methods of research at the same time : quasi -experimental non-equivalent pre and post test to compare : non-equivalent post test to compare. The total number of subjects was 19 who were assigned to the research program : 12 mothers of premature infants at the NICU at the Ch university hospital and 7 at the NICU at the Y general hospital located in Chounju city. The data were collected for 79 days from August 18 to November 5, 1998. The questionnaire method was applied for the data collection, and the measures used in this study were Parental Stressor Scale : NICU(Miles, 1993), the Maternal Role Strain Measures ( Hobbs, 1968 ; Steffensmeier, 1982) , and Self Confidence Scale (Pharis, 1978). Research procedure is as follows : after preliminary examination, the experimental subjects, the mothers of premature infants at the Nl CU at Ch university hospital were provided with slide films and information developed by the researcher based on existing documents and data. It took two 60-minute sessions a week for two weeks, and the mothers' stress level was measured using the same instrument twice one week and two week after the infants' hospitalization. The stress level of the contrast subjects, the mothers at Y general hospital was measured during the same period. The experimental subjects were provided with booklets on matters that require attention after the infants' discharge and on developmental project, and they were educated to play the maternal role in person for 2-3 hours a week : breast-feeding, burping a baby, and changing diapers. One week after the infants' discharge, the maternal role strain and the maternal role performance were examined in two groups of the subjects. The analysis of collected data was done using descriptive statistics including real numbers, percentages, averages, and standard deviations. Mann-Whitney test ; x² test ; Repeated Measures Analysis of Variance ; ANCOVA Spearman's rho correlation coefficients. The results on this study were as follows. (1) The examination of the same quality showed that there were no differences in the general and obstetrical characters between the two groups. However, in terms of the characters of premature infants. just right after their birth, the infants at the contrast group weighed more than those at the experimental group(U=16.5, p=.02), and the former was in mother's womb longer than the latter(U=15.5, p=.02). (2) The stress level of the mothers provided with the plannned nursing intervention program became lower as time passed compared to the others'(F=16.61, p=.00) Even when the influence of weight at birth and the length of gestation was removed among the premature infants' characters, the mothers' stress levels made a statistical difference 2 weeks after the infants' hospitalization depending on treatment (F=8.00, p=.01) (3) The maternal role strain of the mothers provided with the planned nursing intervention program was lower than the others'(U=2.0, p=.00). Even when the influence of weight at birth and the length of gestation was removed among the premature infants' characters, the maternal role strain levels made a statistical difference 2 weeks after the infants' hospitalization, depending on treatment(F=14.72, p=.00). (4) The maternal role performance level of the mothers provided with the planned nursing program was higher than the others'(U=.0, p=.00). Even when the influence of weight at birth and the length of gestation was removed among the premature infants' characters, the mothers' stress levels made a statistical difference 2 weeks after the infants' hospitalization, depending on treatment(F=8.00, p=.01). (5) The correlation between a mother's stress level 2 weeks after her infant's hospitalization, the maternal role strain and the maternal role performance were compared : the stress and the maternal role strain were statistically irrelevant to each other(r=.33, p=.12) : the stress was found to be in inverse proportion to the maternal role performance(r=-.53, p=.02). The maternal role strain was in inverse proportion to the maternal role performance as well(r=-.50, p=.00). In conclusion, for the mothers provided with the planned nursing intervention program, their stress level was getting lower as time passed during the infants' hospitalization, their maternal role strain reduced when they took care of their infants after their discharge, and their maternal role performance level was high compared to the other mothers. Besides, the lower the stress level of mothers of premature infants was during the infants' hospitalization, the higher the maternal role performance after their discharge was. The lower maternal role strain was, the higher the maternal role performance was as well. These results of the study suggested that the nursing intervention program for the mothers of premature infants developed by the researcher would be effectively applied to nursing practice, and it would be a foundation for the development of this kind of program.

• Journal of Biosystems Engineering
• /
• v.15 no.3
• /
• pp.207-218
• /
• 1990

Grains display characteristics of both elastic bodies and viscous fluids when they are subjected to mechanical treatments in harvesting, handling, and processing. This viscoelastic behavior of grains when mechanically stressed must be fully understood to establish maximum machine efficiency and have a minimum degree of grain damage and the highest quality of the final product. The studies were conducted to examine the effect of the moisture content, the loading rate and the initial deformation on the stress relaxation behavior of whole kernel of rough rice, and develop the rheological model to represent its stress relaxation behavior. The following results were obtained from the study. 1. Moisture content had the greatest influence on the initial portion of the relaxation curve. With elapsing time the lower moisture content resulted in the lower residual stress for the Japonica-type rough rice and vice versa for the Indica-type rough rice. But within the ranges of moisture content tested, the degree of stress relaxation per unit strain on the Indica-type rough rice was a little higher than those on the Japonica-type rough rice. 2. The slower loading rate resulted in less initial stress. The decreasing trend of residual stress for all the samples tested with increasing loading rate was shown. 3. The higher initial deformation for all the samples resulted in less initial stress. The increasing of amount of stress relaxation per unit strain with increase of initial stress indicated that viscoelastic properties of rough rice depended not only upon duration of load applied but also initial stress applied. This means that rough rice is nonlinear viscoelastic material. 4. The compression stress relaxation properties of rough rice kernel can be described by a generalized Maxwell model representing by the Maxwell elements.

• Computers and Concrete
• /
• v.8 no.2
• /
• pp.229-241
• /
• 2011

In this work, cement paste samples with 1% (by cement mass) of a conductive carbon fiber admixture have been studied under uniaxial compression. Three different arrangements were used to measure the resistivity of the samples. According to the results obtained, the resistance should be measured using the four wire method in order to obtain good sensitivity and repeatability. The effect of the load value and the load rate on the fractional change of the volume resistivity has been determined. It has been observed that the gage factor (fractional change in resistance respect to strain) increases when the maximum load is increased, and the loading rate does not affect significantly this parameter. The effect of the sample ambient humidity on the material piezoresistivity has also been studied, showing that the response of the composite is highly affected by this parameter.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.2
• /
• pp.3-9
• /
• 2006

HSM(High-speed Machining) is widely used in rapid manufacturing of precision products and molds of various materials. Improvement in cutting efficiency is one of the important subjects in the HSM process. To analyse the dynamic behavior during a very short cutting time, the computational analysis code, LS-DYNA3D, was employed for the simulation of the mechanism of HSM for aluminium 7075. This cutting mechanism includes some difficult points in simulation, for example, material and geometrical non-linearity, high-speed dynamic impact, contact with friction, etc. In this paper, a finite element model considering the strain rate effect is proposed to predict the cutting phenomena such as chip deformation, strain and stress distributions, which will help us to design the HSM process.

• Journal of the Korean Home Economics Association
• /
• v.33 no.3
• /
• pp.101-112
• /
• 1995

This study examines a multivariate model of the effect of life events and transitions, intrafamily strain, marital adjustment, and appraisal on family well-being across the family system types. Data from 356 families were analysed SAS program. The result show that life events had no direct on family well-being but they intensified intrafamily strain. Family strain, in turn, negatively affected marital adjustment in flexible-connected families and structured-seperated families and perceived well-being in flexible-seperared, flexible-connected and structured-seperated families. marital adjustment were positively related to well-being in flexible-connected families. In flexible-connected families, marital adjustment seems to buffer the effect of intrafamily stain on well-being. The result also suggested that a combination of cohesion and adaptability level may explain differencies in the family's response to de4mands.