• Title/Summary/Keyword: strength meter

Search Result 185, Processing Time 0.024 seconds

Temperature Dependence of Volume Resistivity on Epoxy Nano-composites (에폭시 나노컴퍼지트 체적 고유저항의 온도 의존성)

  • Kim, Chang-Hoon;Lee, Young-Sang;Kang, Yong-Gil;Park, Hee-Doo;Shin, Jong-Yeol;Hong, Jin-Woong
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.24 no.10
    • /
    • pp.834-838
    • /
    • 2011
  • This research shows the electrical characteristic using excellent epoxy nano-composite of MgO 5.0 wt% and $SiO_2$ 0.4 wt% in mechanical strength test depending on nano-additive. First of all, volume resistance depending on nano-additive and temperature using high resistance meter (HP. 4329A) by increasing 10, 100, 1,000 V of applying voltage was measured. Moreover, temperature range of $25{\sim}120^{\circ}C$ with virgin sample was tested using TO-9B oven by Ando Company. The result showed that virgin and the samples added with MgO and $SiO_2$ had similar value of volume resistance in low temperature and low electric field region and reduced with slow slope. The nano-composite's volume resistance of sample added with MgO and $SiO_2$ had higher value than virgin sample's volume resistance in high temperature region more than $80^{\circ}C$. Moreover, the slope has steeply reduced. The volume resistance of sample added with MgO 5.0 wt% was $8.38{\times}10^{13}\;{\Omega}{\cdot}cm$ and it was 6.8 times more than virgin sample in high temperature at $120^{\circ}C$. The insulation characteristics were constant although filler has changed in low temperature region. But, in high temperature region, the value of volume resistance of sample with MgO 5.0 wt% was 7.6 times more than the virgin sample's volume resistance.

Synthesis of Dimer Acid Methyl Ester Using Base-treated Montmorillonite (염기 처리된 montmorillonite를 이용한 다이머산 메틸에스테르의 합성)

  • Yuk, Jeong Suk;Shin, Jihoon;Kim, Young-Wun
    • Tribology and Lubricants
    • /
    • v.35 no.2
    • /
    • pp.132-138
    • /
    • 2019
  • In this study, we demonstrate the effects of the acidic properties of montmorillonite (MMT), which is commonly used as a catalyst, on the conversion and selectivity of the dimer acid methyl ester (DAME) synthesis. We synthesize DAME by the dimerization of conjugated linoleic acid methyl ester (CLAME) and oleic acid methyl ester using MMT KSF. Incidentally, trimer acid methyl ester was formed as a by-product during the DAME synthesis. There is a necessity to adequately adjust the strength and quantity of the acid site to control the selectivity of DAME. Therefore, we vary the pH of the MMT acid by using various metal hydroxides. The purpose of this study is to increase the yield of monocyclic dimer acid methyl ester, which is a substance with adequate physical properties for industrial applications (e.g., lubricant and adhesive, etc.), using a heterogeneous catalyst. We report the dimerization of fatty acid methyl ester by using base treated-KSF, and apply it to conjugated soybean oil methyl ester. Then, we transmute the acid site properties of KSF, such as pH of 5 wt.% slurry KSF and various alkali metals (Li, Na, K, Ca). Characterization of base treated-KSF using a pH meter, x-ray diffraction, inductively coupled plasma-atomic emission spectrometer, Brunauer-Emmett-Teller surface analysis, and temperature-programmed desorption. We conduct an analysis of CLAME and DAME using nuclear magnetic resonance spectroscopy, gas chromatography, and gel permeation chromatography. Through these experiments, we demonstrate the effects of the acidic properties of KSF on the conversion and selectivity of the DAME synthesis, and evaluate its industrial potential by application to waste vegetable oil.

Research on the Development of Conductive Composite Yarns for Application to Textile-based Electrodes and Smartwear Circuits (스마트웨어용 텍스타일형 전극 및 배선으로의 적용을 위한 전도성 복합사 개발 연구)

  • Hyelim Kim;Soohyeon Rho;Wonyoung Jeong
    • Fashion & Textile Research Journal
    • /
    • v.25 no.5
    • /
    • pp.651-660
    • /
    • 2023
  • This study aimed to research the local production of conductive composite yarn, a source material used in textile-type electrodes and circuits. The physical properties of an internationally available conductive composite yarn were analyzed. To manufacture the conductive composite yarn, we selected one type of conductive yarn with Ag-coated polyamide of 150d 1 ply, along with two types of polyethylene terephthalate (PET) with circular and triangular cross-sections, both with 150d 1 ply. The conductive composite yarn samples were manufactured at 250, 500, 750, and 1000 turns per meter (TPM). For both conductive composite yarn samples manufactured from two types of PET filaments, the twist contraction rate of the sample with a triangular cross-section was stable. Among the samples, the tensile strength of the sample manufactured at 750 TPM was the highest at approximately 4.1gf/d; the overall linear resistance was approximately 5.0 Ω/cm, which is within the target range. It was confirmed that the triangular cross-section sample manufactured with 750 TPM had a similar linear resistance value to the advanced product despite the increase in the number of twists. In future studies, we plan tomanufacture samples by varying the twist conditions to derive the optimal conductive yarn suitable for smartwear and smart textile manufacturing conditions.

BASIC STUDIES ON THE PHYSICAL FITNESS OF KOREAN SCHOOL BOYS AND GIRLS (한국(韓國) 어린이 및 청소년(靑少年)의 체력(體力)에 관(關)한 기초연구(基礎硏究))

  • Park, H.K.;Paik, K.S.;Yoo, M.J.;Min, H.S.;Chung, T.S.;Oh, S.B.;Lim, M.J.;Hong, C.K.
    • The Korean Journal of Physiology
    • /
    • v.2 no.2
    • /
    • pp.101-135
    • /
    • 1968
  • As physical fitness measured was muscle strength (hand grips, leg extention, back lift, and arm pull and thrust), skinfold thickness (5 different sites), circulatory function (resting heart rate and blood pressure), speed (kinesiological analysis during 100m sprint, record, maximal and final speed), motor function (50 meter dash, ball throwing, standing broad jump, and pull-ups), maximal aerobic power (maximum oxygen intake by field running method), muscle power (leg and arm by inertia ergometer), and general endurance (maximum endurance running time on the treadmill at the speed of 5 MPH and grade of 15.5%) of 1131 Korean children (boys 572, girls 559) aged of 6 to 17 years, who were randomly sampled from 24 primary, middle and high schools at the two districts of Seoul and KyungKi. The results are summarized as follows: 1) The status (height and weight) of the children was almost same as that of the previously reported Korean and Japanese children of same ages. 2) Muscle strength was a gained linearly with geting age in the boys and girls but there was a little improvement in girls aged of 13 years or more. 3) The mean skin fold thickness was increased linearly with geting ages in both sexes, but the girls from 12 to 17 years of age were increased rapidly, and maximum value was 17mm, while boys was 7.0 mm. 4) In the circulatory function, the resting heart rate was decreased, but the blood pressure was increased with ages in both sexes within the normal limits. 5) The maximum and final speed during 100 meter sprint increases with age in boys but girls who are 12 years old or older, were not improved any mere. The patterns of running were same in both sexes, and maximum speed reached at about 30 meters from starting line. 6) The motor function was increased with age in both sexes, but there was no improvement in 12 years of age or older girls. More over records of all functions except standing broad jump was less than those of Japanese in the same age, respectively. 7) The maximum oxygen intake (MOI) was increased considerably with ages and maximum values were 2.93 L/min (boys) and 2.09 L/min (girls) at the age of 17years. This result was almost same as that of the Japanese and Easter Island population, but the value was lower than that of Europe. The average of the maximum oxygen intake per kg body weight per minute from 9 to 17 years of age were around 53 ml in the boys and 42 ml in the girls. 8) Muscle power was increased linearly with ages in boys while there was relatively a little increment in girls. The maximum values of leg muscle in boys and girls at the 17 years of age were 0.168 and 0.088 horse power, respectively. 9) The maximum endurance running time was increased considerably from the age of 9 in boys, while there was no improvement in girls. The maximum values were 6.0 min and 1.8 min, respectively.

  • PDF

Lane-wise Travel Speed Characteristics Analysis in Uninterrupted Flow Considering Lane-wise Speed Reversal (차로속도역전현상을 고려한 연속류 도로의 차로별 주행 속도 특성 분석)

  • Yang, Inchul;Jeon, Woo Hoon;Ki, Sung hwan;Yoon, Jungeun
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.15 no.6
    • /
    • pp.116-126
    • /
    • 2016
  • In this study, lane-wise traffic flow characteristics were analysed on uninterrupted flow using a new notion of "lane-wise travel speed reversal (LTSR)" which is defined as a phenomena that travel speed in the median lane is lower than other lanes. Mathematical formulation was also proposed to calculate the strength of LTSR. The experiment road site is Seoul Outer Ring Expressway (Jayuro-IC~Jangsoo-IC), and travel trajectories for each four lane were collected for weekdays (Mon. through Fri.) during morning peak. Comparing lane-wise travel speeds for entire test road section, no LTSR was observed, meaning that the travel speed in the median lane is the fastest, followed by 2nd, 3rd, and 4th lane as in order. Howerver, the result of microscopic analysis using 100-meter discrete road section based data shows that LTSR occurs many times. Especially the strength of LTSR is higher in congestion area and freeway merge and diverge segment. It is expected that these results could be used as a fundamental data when establishing lane-by-lane traffic operation strategy and developing lane-wise traffic information collection and dissemination technology.

Study on the Physical Properties and Characteristics of Adhesives for Woodcraft (목공예용 천연 및 합성 접착제의 특성 연구)

  • Kim, Seong Eun;Lee, Jin Kyung;Lee, Chae Hoon;Chung, Yong Jae
    • Journal of Conservation Science
    • /
    • v.35 no.6
    • /
    • pp.681-688
    • /
    • 2019
  • In this study, the characteristics of natural and synthetic adhesives used in woodcraft were evaluated. The pattern of deterioration of wood and adhesives according to changes in temperature and humidity were compared. For materials, one type of anlmal glue, three kinds of polyvinyl acetate adhesives, one type of epoxy adhesive and one type of zelkova wood were selected. Characteristics of physical and chemical characteristics, weather resistance and drying speed assessment were carried out. The adhesion characteristic evaluation showed that the adhesion strength of anlmal glue and one type of polyvinyl acetate adhesive were 6.54 N/㎟ and 7.01 N/㎟, pH meter of anlmal glue and polyvinyl acetate adhesives was pH 7.03 and pH 3.32-3.59 which were range of available as an adhesive. According to the test results of weather resistance, epoxy adhesives had the highest decreasing value in adhesion strength after deterioration. In the reversible test of the adhesive, it was found to be highly reversible in NaOH, a soluble solvent excluding epoxy, but attention is required when using the wood since it may show discoloration during processing.

Measurement of Vertical-Directional DTV Signal Level Using a Multi-Copter (멀티콥터를 이용한 수직방향 DTV 신호 레벨 측정)

  • Park, Hyung-Do;Lim, Sol;Kim, Dae Jin
    • Journal of Broadcast Engineering
    • /
    • v.19 no.3
    • /
    • pp.372-384
    • /
    • 2014
  • DTV field tests have been performed to measure field strength and to check reception ratio on indoor and outdoor sites. They use an antenna of 9m to measure DTV signal in case of outdoor measurement on the road. Modern skyscrapers require the analysis of vertical-directional wave propagation by measuring vertical-directional DTV signal. Even if the field strength is above the reception threshold of $43dB{\mu}V/m$, the reception is impossible in case of strong multi-path or high impulse noise. So, vertical-directional field measurement is essential in environment of tall buildings. In this paper, we developed an octo type multi-copter to measure vertical-directional DTV signal level. A compact and portable DTV signal level meter, an antenna, a microwave transmitter for data transmission, and a recording equipment are equipped in the multi-copter. Three different sites are selected to test the measurement system. Developed measurement system using the multi-copter is very useful in measuring vertical-directional DTV signal, especially in apartments, non-accessible area by vehicles, and forbidden areas.

Comparative Study for Compatibility of Acellular Dermis ($SureDerm^{TM}$) and Synthetic Material (PROCEED$^{(R)}$) on Abdominal Wall Defect in Rabbit Models (토끼의 전층 복벽 결손 재건에서 무세포진피 ($SureDerm^{TM}$)와 합성물질(PROCEED$^{(R)}$)에 대한 생체적합성 비교 연구)

  • Kang, Nak-Heon;Song, Seung-Han;Kang, Dae-Young;Ahn, Jae-Hyoung;Choi, Da-Mi;Kim, Jin-Young
    • Archives of Plastic Surgery
    • /
    • v.38 no.2
    • /
    • pp.135-142
    • /
    • 2011
  • Purpose: Deficiencies of the abdominal wall can be the a result of infection, surgery, trauma, or primary herniation. For abdominal wall reconstruction, synthetic materials have been shown to provide a better long-term success rate than primary fascial repair. But, synthetic materials cannot elicit angiogenesis or produce growth factor and are therefore plagued by an inability to clear infection. As a result of the inherent drawbacks of synthetic, significant effort has been spent on the identification of new bioprosthetic materials. The aim of our study is to evaluate the effectiveness of a synthetic material (PROCEED$^{(R)}$) and an ADM ($SureDerm^{TM}$) to repair abdominal wall defects in a rabbit models. Methods: We measured the tensile strength of the $SureDerm^{TM}$ and PROCEED$^{(R)}$ by a Tension meter (Instron 4482). 16 Rabbit models were assigned to this study for abdominal wall reconstruction. Abdominal defect of 8 rabbits were reconstructed by PROCEED$^{(R)}$ and the rest were reconstructed by $SureDerm^{TM}$. We assessed gross and histologic examinations for the reconstructed abdominal wall. Results: The tensile strength of $SureDerm^{TM}$ and Gore Tex$^{(R)}$ is $14.64{\pm}0.51Mpa$, $8.54{\pm}0.45Mpa$. PROCEED$^{(R)}$ was estimated above the limits of measurement. Inflammatory reaction of PROCEED$^{(R)}$ persisted for 32weeks, but $SureDerm^{TM}$ decreased after 16weeks. Vascular ingrowth into the $SureDerm^{TM}$ was seen after 32 weeks. The basement membrane of $SureDerm^{TM}$ changed into a form of pseudoperitoneum. In PROCEED$^{(R)}$, it seemed like pseudoepithelial lining was made from the fibrosis around the mesh. Conclusion: In our study, the $SureDerm^{TM}$ not only have less inflammatory reaction and presented more angiogenesis than the PROCEED$^{(R)}$, but also have pseudoperitoneum formation. It is expected that $SureDerm^{TM}$ is useful for abdominal wall reconstruction. However, a long-term study of its usage consequences are thought to be needed.

Triboelectrostatic Separation of Unburned Carbon from Flyash for Ash Recycling (마찰대전 정전분리기를 이용하여 석탄회에 함유된 미연탄소분 제거에 관한 연구)

  • 이재근;김성찬;손낙원;김두현;오정근
    • Resources Recycling
    • /
    • v.6 no.3
    • /
    • pp.15-21
    • /
    • 1997
  • Flyash from a coal-hed power plan1 is produced approximtcly 3 million tons m 1996 and causes the serious environmentalpmblem due to the disposal in the ash pond. Flyash is an accepted additive in concrete where it adds strength, sulfate ateresistanceand reduced cost, provided acccptablc levcls of unbunrned carbon are mmtmed This papzr describes to investigate thc technicalfeasibility of a dry triboelcctrostatlcp roccss to scparate unburned carbon h m f lyash into economically valuable produck Puliclesof unburned carbon and flyash can be impded positivc and negative surface charzes. rcapeclively. with a copper tniochargcr dueto dirferences in the work function values of thc particles and the tnbacharger. and cm he separated by passing thcm throuph anexternal electic field. A laboratory s d e separation system consists of r sacw feeder for ash supply, a tniocharger, verticalcollecling copper plates, power supplies, a flow meter, and a fan. Separation tests taking into account separahian efficiency and ashrecovery showed that flyash recovery was sh-nngly dependent an thc tnbocharger geomzhy, elect"c ficld strength. flyssh s ~ c a,n dash feeding late. Optimal separation conditions were flyash size less than 125 Fm and electric field shcngrh of 200 kV1m. Ovcr 80%of the flyash with 7% lass on ignition was recovered at wrbon contznts less than 3%bon contznts less than 3%

  • PDF

Electromagnetic Wave and EMF Attenuation by Shielding Materials in home appliances (가전제품 전자파 현황 및 차폐재에 의한 감쇄 효과)

  • Cho, Jae-Cheol;Park, Jae-Hwan
    • Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
    • /
    • v.9 no.6
    • /
    • pp.711-718
    • /
    • 2019
  • Spectrum analyzer and electromagnetic field meter were used to investigate the EM generation behaviour in different types of home electrical appliances. During microwave oven operation, the EM power measured at a point 30cm apart was measured in the range of 8~11mW/㎡, the strength of the low frequency magnetic field was 60~80mG and the electric field strength was measured at 150~160V/m. For smart phone wireless charging pad, it was measured at an electromagnetic power of 0.4mW/㎡, an electric field of 160 V/m and a magnetic field of 1mG at a point 10cm away. For microwave oven and wireless charging pad, if used within 10cm, the size of the electric field has been measured at a large value that exceeds the human body protection standard and may be hazardous to humans. On the other hand, home appliances such as TVs, hairdryers and refrigerators all showed very low levels of electromagnetic waves, electric fields and magnetic fields, with no harmful effects seen. For electromagnetic shielding, the metal Cu fabric and metal foil had a high level of EM shielding, while polymer films had a low EM shielding characteristic.