• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.442-458
• /
• 2014

Wave induced vibrations increase the fatigue and extreme loading, but this is normally neglected in design. The industry view on this is changing. Wave induced vibrations are often divided into springing and whipping, and their relative contribution to fatigue and extreme loading varies depending on ship design. When it comes to displacement vessels, the contribution from whipping on fatigue and extreme loading is particularly high for certain container vessels. A large modern design container vessel with high bow flare angle and high service speed has been considered. The container vessel was equipped with a hull monitoring system from a recognized supplier of HMON systems. The vessel has been operating between Asia and Europe for a few years and valuable data has been collected. Also model tests have been carried out of this vessel to investigate fatigue and extreme loading, but model tests are often limited to head seas. For the full scale measurements, the correlation between stress data and wind data has been investigated. The wave and vibration damage are shown versus heading and Beaufort strength to indicate general trends. The wind data has also been compared to North Atlantic design environment. Even though it has been shown that the encountered wind data has been much less severe than in North Atlantic, the extreme loading defined by IACS URS11 is significantly exceeded when whipping is included. If whipping may contribute to collapse, then proper seamanship may be useful in order to limit the extreme loading. The vibration damage is also observed to be high from head to beam seas, and even present in stern seas, but fatigue damage in general is low on this East Asia to Europe trade.

• 대한심미치과학회지
• /
• 제3권1호
• /
• pp.32-43
• /
• 1995

Ni-Ti alloy has excellent corrosion resistance, biocompatibility, shape memory effect and superelasticity, so it has been used widely in biomedical fields. But it has difficulty in casting due to its high melting temperature and oxygen affinity at high temperature. Recently it has been attempted to cast Ni-Ti alloy using new casting machine and investment. The purpose of this study was to examine the superelastic behavior of cast shape memory Ni-Ti alloy and to compare the mechanical properties of the cast shape memory alloy with those of commercial alloys for removable partial denture framework. Ni-Ti alloy(Ni 50.25%, Ti 49.75% : atomic ratio) was cast with dental argon-arc pressure casting machine and Type IV gold alloy, Co-Cr alloy, Ni-Cr alloy, pure titanium were cast as reference. Experimental cast Ni-Ti alloy was treated with heat($500{\pm}2^{\circ}C$) in muffle furnace for 1 hour. Transformation temperature range of cast Ni-Ti alloy was measured with differential scanning calorimetry. The superelastic behavior and mechanical properties of cat Ni-Ti alloy were observed and evaluated by three point bending test, ultimate tensile test, Vickers microhardness test and scanning electron microscope. The results were as follows : 1. Cast Ni-Ti alloy(Ni 50.25%, Ti 49.75% : atomic ratio) was found to have superelastic behavior. 2. Stiffness of cast Ni-Ti alloy was considerably lesser than that of commercial alloys for removable partial denture. 3. Permanent deformation was observed in commercial alloys for removable partial denture framework at three point bending test over proportional limit(1.5mm deflection), but was not nearly observed in cast Ni-Ti alloy. 4. On the mechanical properties of ultimate tensile strength, elongation and Vickers microhardness number, cast Ni-Ti alloy was similiar to Type IV gold alloy, Co-Cr alloy, Ni-Cr alloy and pure titanium. With these results, cast Ni-Ti alloy had superelastic behavior and low stiffness. Therefore, it is suggested that cast Ni-Ti alloy may be applicated to base metal alloy for removable partial denture framework.

• 한국학교보건학회지
• /
• 제8권2호
• /
• pp.293-303
• /
• 1995

Health has occupied a position of importance in the human history, whether it be in the East or in the West, and it is a subject in which people have been constantly interested. The concept of health has changed continuously as the society has developed, industrialized and become more structured. The perception of health concept can be an esential factor which is to determine the health behaviors. This study is a descriptive inquiry done to identity high school students' perception of health and what they do as health behaviors. The subject consisted of 503 voctional high school seniors, 129 boys and 374 girls, from a school located in An-san Si, kyong-gi Do. The instruments used for this study were open-ended questionnaires and data were collected by having the students fill out the questionnaires which took 10 minutes, in their first class, April 6, 1995. The collected materials were classified and recorded on the cards according to each question using the terms which students had written. After putting statements which had common meanings together, the representative categories were labelled. The results obtained are as follows. 1. Categorizing and labelling of health concepts What high school students descripted as health concepts were classified as the absence of illness, physical comfort, strong physical strength and physique, not having a deformity, resisting power, self control mental-rest(or psychological comfort), wholesome ideas, self-control, harmony in body and in mind, maintenace of daily life, pleasant life, good friends, peaceful family life and realizing objectives. 2. Categorizing and labelling of health behaviors These were classified as preventive life, good dietary habits and regimen, maintenance of clean body, exercises, preventing obesity, rest, environmental balance or control of environment, limit one's tastes, making use of leisure, peaceful mind, sound thought and regular living habits. The result indicates that the health concepts were positive and included not only absence of illness but also harmony in body and in mind and pleasant life; health behaviors which had high frequency were good dietary habits and regimen, exercises and sound thought. It is hoped that these findings well serve as practical references for teachers when they counsel with, and provide the students with guidance programs which include health care.

• Steel and Composite Structures
• /
• 제35권5호
• /
• pp.641-657
• /
• 2020

A unique lightweight string truss deployable bridge assembled by thin-walled fiber reinforced polymer (FRP) and metal profiles was designed for emergency applications. As a new structure, investigations into the static structural performance under the serviceability limit state are desired for examining the structural integrity of the developed bridge when subjected to unsymmetrical loadings characterized by combined torsion and bending. In this study, a full-scale experimental inspection was conducted on a fabricated bridge, and the combined flexural-torsional behavior was examined in terms of displacement and strains. The experimental structure showed favorable strength and rigidity performances to function as deployable bridge under unsymmetrical loading conditions and should be designed in accordance with the stiffness criterion, the same as that under symmetrical loads. In addition, a finite element model (FEM) with a simple modeling process, which considered the multi segments of the FRP members and realistic nodal stiffness of the complex unique hybrid nodal joints, was constructed and compared against experiments, demonstrating good agreement. A FEM-based numerical analysis was thereafter performed to explore the effect of the change in elastic modulus of different FRP elements on the static deformation of the bridge. The results confirmed that the change in elastic modulus of different types of FRP element members caused remarkable differences on the bending and torsional stiffness of the hybrid bridge. The global stiffness of such a unique bridge can be significantly enhanced by redesigning the critical lower string pull bars using designable FRP profiles with high elastic modulus.

• 한국지반공학회논문집
• /
• 제35권12호
• /
• pp.45-58
• /
• 2019

본 연구에서는 강우의 침투에 따른 토사사면의 파괴에 대한 강우강도-지속시간의 강우기준을 평가하기 위하여 수치해석에 의한 파괴시간의 확률론적 해석 절차를 제안하였다. 취약도 곡선은 시간에 따른 강우의 침투해석 결과를 반영하며 지반의 역학적 특성의 불확실성을 고려한 MCS에 의한 확률론적 사면 안정해석의 결과로부터 강우강도-지속기간의 함수로 생성하였다. 확률론적 해석에서 한계상태함수를 계산하기 위하여 강우의 침투해석과 연동된 사면 안정해석을 수행하였다. 생성된 사면의 취약도 곡선들을 기반으로 확률론적 사면 파괴분포 분석을 수행하여 지반의 불확실성을 고려한 사면 파괴 유발 강우기준을 평가하였다. 제안된 사면 파괴분포 분석법은 강우의 침투로 인한 사면 파괴의 과정을 분석하고 사면 파괴가 발생할 수 있는 시간을 예측하는데 유용하게 사용될 수 있다.

• 항공우주시스템공학회지
• /
• 제12권3호
• /
• pp.70-78
• /
• 2018

탄소섬유 복합재료를 적용하는 일체형 접이식 날개 개발에 대한 연구를 수행하였다. 설계 요구조건을 검토하고 상용 소프트웨어를 적용한 최적설계기법을 통해 복합재료 날개 설계를 실시하였다. 복합재료 제조공정인 핫프레스, 펄트루전, 오토클레이브를 평가하고 성능과 비용을 고려하여 일체형 날개제작에 가장 적합한 다중공정을 결정하였다. 설계개념 확정을 위해 두 차례의 설계개발시험으로 제작공정을 검증하고 구조해석을 통해 복합재료 날개의 강성과 강도를 예측하였다. 시험하중을 먼저 산출하고 양쪽 날개를 대상으로 설계제한하중과 설계극한하중에 대한 정하중 구조시험을 수행하였다. 그 결과, 시험의 각 평가기준을 만족하였으며 일련의 구조해석과 시험을 통해 구조안전성을 검증하였다.

• 콘크리트학회논문집
• /
• 제29권4호
• /
• pp.353-360
• /
• 2017

PHC말뚝을 보강한 CFP말뚝의 P-M 상관도를 통한 휨 모멘트 예측과 휨 실험 결과를 통해 P-M 계산법의 타당성과 CFP말뚝의 휨 성능을 평가한 실험 연구이다. 시험체는 PHC말뚝과 링형 합성 전단연결재 그리고 속채움 콘크리트를 기본으로 한 CFP말뚝과 1차 보강(말뚝 보강철근 H13-8ea), 2차 보강(내부 보강철근 H19-8ea)으로 제작된 시험체의 휨 실험 결과 CFP-N-N 시험체 대비 최고 하중이 46.4%, 103.9% 증대되었으며, 보강 철근량에 따른 연성능력 증대가 이루어졌다. 또한 CFP말뚝 설계법의 극한한계상태 예측값과 실험 결과값을 비교해 볼 때, 각 보강 단계별 1.23, 1.40배의 안전율을 확보하여 본 연구에서 제시한 설계법이 합리적인 것으로 판단된다.

• 한국결정성장학회지
• /
• 제28권4호
• /
• pp.175-178
• /
• 2018

구리 금속은 높은 열전도도로 heat sink 혹은 heat exchanger로 널리 사용되고 있다. 그러나 이에 반하여 낮은 인장강도와 사용온도 한계를 가지고 있다. 따라서 높은 열전도도, 낮은 제작비와 함께 우수한 기계적 특성이 요구된다. 본 연구에서는 이를 위하여 동철합금($Cu_{50}-Fe_{50}$ alloy)를 고주파 가열로를 이용하여 제조하고 그 특성을 조사하였다. 제조된 동철합금은 Cu, ${\alpha}$-Fe, ${\gamma}$-Fe 결정구조를 기진 dendrite 미세구조를 보여주었다. 제조된 동철합금은 XRD, FE-SEM, EDS 및 XRF를 이용하여 결정구조 및 미세구조를 분석하였으며 전력공급 접점용 소재로서의 적합성을 확인하고자 하였다.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8637-8642
• /
• 2015

현재 군에 보급되고 있는 접착식 전투화용 고무의 대표적인 노화현상은 열에 의한 정기적인 스트레스 노화가 대표적이다. 본 연구에서는 전투화용 고무의 노화시험을 실시하고, 아레니우스 관계식을 이용하여 노화온도($60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$)에 따른 반응속도 상수 k를 구하였다. 제품의 수명한계를 인장강도는 30% 감소시점, 신장률은 50% 감소시점, 내마모도는 380%로 가정하였으며, ln($P/P_0$) 및 활성화 에너지와 상수를 고려한 수명예측을 하였다. 이를 통해 노화온도에 영향을 받은 전투화용 고무의 수명을 예측하였고, 그 결과 실온($20^{\circ}C$)에서 예상수명이 10년 이상임을 확인할 수 있었다.

• 대한전자공학회논문지
• /
• 제18권4호
• /
• pp.49-61
• /
• 1981

N+P, N+PP+ 형 태양전지를 제조하여 얻은 실험자료들을 근거로 실리콘 접합형 태양전지에 일반적으로 적용할 수 있는 컴퓨터 모의 실험 프로그램을 개발하고, 이의 유용성을 확인하였다. 이 모의 실험 프로그램은 N+P, P+N, N+PP+, P+NN+형의 실리콘 태양전지에 적용할 수 있는 것으로, 입사광은 AMI, 등강도 광원, 인공조명으로 많이 사용되는 GE -ELH 광원이고, AR코팅은 Si3N4형과 투과도가 파장에 관계없는 일정형 2종류가 있으며, 프로그램에서 이들 전지의 구조, 광원, AR 코팅 종류에 대한 파장 특성분포도 쉽게 변화시킬 수 있도록 되어 있다. 이 모의실험의 결과들을 토대로 N+와 P 영역에서의 평균도오핑농도와 전지의 두께, AMI 스펙트럼에 대한 집광도, 앞면 접합깊이에 대하여 효율이 최대가 되는 최적치들을 구하였으며, 앞면의 표면 재결합 속도, 접합부에서의 캐리어의 유효 수명, 누설저항에 대하여는 허용 한계치로, 기타 효율변화인자로서 동작온도 직렬저항과 전기장의 세기에 대하여는 효율의 변화율로서 파라미터들이 효율에 미치는 영향들을 분석하였다.