• Advances in concrete construction
• /
• v.15 no.6
• /
• pp.359-376
• /
• 2023

Ultra-high-performance concrete (UHPC) has become an attractive cast-in-place repairing material for existing engineering structures. The present study aims to investigate age-dependent high-early-strength UHPC (HESUHPC) material properties (i.e., compressive strength, elastic modulus, flexural strength, and tensile strength) as well as interfacial shear properties of HESUHPC-normal strength concrete (NSC) composites cured at different season temperatures (i.e., summer, autumn, and winter). The typical temperatures were kept for at least seven days in different seasons from weather forecasting to guarantee an approximately consistent curing and testing condition (i.e., temperature and relative humidity) for specimens at different ages. The HESUHPC material properties are tested through standardized testing methods, and the interfacial bond performance is tested through a bi-surface shear testing method. The test results quantify the positive development of HESUHPC material properties at the early age, and the increasing amplitude decreases from summer to winter. Three-day mechanical properties in winter (with the lowest curing temperature) still gain more than 60% of the 28-day mechanical properties, and the impact of season temperatures becomes small at the later age. The HESUHPC shrinkage mainly occurs at the early age, and the final shrinkage value is not significant. The HESUHPC-NSC interface exhibits sound shear performance, the interface in most specimens does not fail, and most interfacial shear strengths are higher than the NSC-NSC composite. The HESUHPC-NSC composites at the shear failure do not exhibit a large relative slip and present a significant brittleness at the failure. The typical failures are characterized by thin-layer NSC debonding near the interface, and NSC pure shear failure. Two load-slip development patterns, and two types of main crack location are identified for the HESUHPC-NSC composites tested in different ages and seasons. In addition, shear capacity of the HESUHPC-NSC composite develops rapidly at the early age, and the increasing amplitude decreases as the season temperature decreases. This study will promote the HESUHPC application in practical engineering as a cast-in-place repairing material subjected to different natural environments.

• Journal of Nutrition and Health
• /
• v.32 no.1
• /
• pp.3-9
• /
• 1999

This study examined the effect of dietary lipids and ovariectomy(OVX) on bone mass in rats. The experimental animals were divided into sham operation(S) or OVX(O) groups and then each group was divided into soybean oil(SS, OS), beef tallow(SB, OB), and fish oil(SF, OF) diet group. Experimental diets were fed for 16 weeks. Weight gain tended to be higher in OVX groups than in sham groups. Weigth gain was the highest in beef tallow group (SB) and the lowest in fish oil group(SF). There were no difference in weight, length, breaking force, strength and circumference of femur mong groups. However, volume of femur tended to be higher in OVX groups than in sham groups. Ash content of femur was significantly lower in OVX than sham groups but there were no difference between SB and OB group. Ca content in the soybean oil and beef tallow group were not influenced by OVX but Ca content in fish oil group was significantly higher in OF than SF group. The SB group showed the hyighest Ca content and the SF group showed the lowest Ca content. P content of femur was significantly lower in OVX groups than in sham groups but there were no difference between SB and OB group. The SS group showed the highest P content and the OS and OF group showed lower P content compare to other groups. From this result, it suggested that beef tallow positively influenced maintenance of bone mass by means of accumulation of body fat in ovariectomy.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.2
• /
• pp.152-158
• /
• 2015

In order to investigate the feasibility of stone dust sludge as fine aggregate, an experimental study was performed on cement mortar with stone dust sludge. fresh mortar properties and strength with various stone dust sludge replacement ratios were estimated. the replacement ratio adopted in this study was 0, 10, 20, 30%. Flow, air content, and rheological properties were considered as properties of fresh mortar. Compressive strength and flexural tensile strength were measured for strength. The results are as follows. Higher amount of stone dust sludge caused reduction in slump and air content. In the rheological properties, both yield stress and plastic viscosity increased as stone dust sludge content increased up to 20% replacement ratio, but there were no remarkable difference between 20 and 30%. Yield stress increased drastically between 10 and 20%. Compressive and flexural tensile strength results indicated that the strength variation was not significant according to stone dust sludge content, but the strength gain in the early age by adding stone dust sludge was evident. the strength at the age of 28 days however did not show noticeable effect of adding stone dust sludge.

• Korean Journal of Veterinary Research
• /
• v.50 no.2
• /
• pp.93-103
• /
• 2010

This study investigated the potential effects of amitraz on the pre- and postnatal development, behavior, and reproductive performance of offspring of parent rats given amitraz during pre-mating, gestation, and lactation. The test chemical was administered via the drinking water containing 0, 40, 120, and 360 ppm to male rats from 2 weeks before mating to the end of 14-day mating period and to females from 2 weeks before mating, throughout mating, gestation and lactation up to weaning. Based on fluid consumption, the male rats received an average of $0,\;5.7{\pm}1.33,\;13.2{\pm}2.08,$ and $35.8{\pm}3.42$ mg/kg/day amitraz, and the female rats received an average of $0,8.7{\pm}4.42,\;20.1{\pm}9.60,\;and\;47.6{\pm}22.38$ mg/kg/day amitraz, respectively. At 360 ppm, an increase in the incidence of abnormal clinical signs, a suppression in the body weight gain, a decrease in the food consumption and litter size, an increase in the post-implantation loss, and a decrease in the seminal vesicle weight were observed in the parent animals. In addition, a suppression in the body weight gain, a decrease in the grip strength, a delay in the negative geotaxis, an increase in the pre- and post-implantation loss, and a decrease in the number of live embryos were observed in the offspring. At 120 ppm, suppressed body weight gain and reduced food consumption were observed in the parent rats. Suppressed body weight gain and decreased grip strength were also observed in the offspring. There were no signs of either reproductive or developmental toxicity at 40 ppm. Under these experimental conditions, the no-observed-adverse-effect level of amitraz for parent rats and their offspring was estimated to be 40 ppm in rats.

• Journal of Ginseng Research
• /
• v.46 no.3
• /
• pp.454-463
• /
• 2022

Background: Gintonin-enriched fraction (GEF), a non-saponin fraction of ginseng, is a novel glycolipoprotein rich in hydrophobic amino acids. GEF has recently been shown to regulate lipid metabolism and browning in adipocytes; however, the mechanisms underlying its effects on energy metabolism and whether it affects sarcopenic obesity are unclear. We aimed to evaluate the effects of GEF on skeletal muscle atrophy in high-fat diet (HFD)-induced obese mice. Methods: To examine the effect of GEF on sarcopenic obesity, 4-week-old male ICR mice were used. The mice were divided into four groups: chow diet (CD), HFD, HFD supplemented with 50 mg/kg/day GEF, or 150 mg/kg/day GEF for 6 weeks. We analyzed body mass gain and grip strength, histological staining, western blot analysis, and immunofluorescence to quantify changes in sarcopenic obesity-related factors. Results: GEF inhibited body mass gain while HFD-fed mice gained 22.7 ± 2.0 g, whereas GEF-treated mice gained 14.3 ± 1.2 g for GEF50 and 11.8 ± 1.6 g for GEF150 by downregulating adipogenesis and inducing lipolysis and browning in white adipose tissue (WAT). GEF also enhanced mitochondrial biogenesis threefold in skeletal muscle. Furthermore, GEF-treated skeletal muscle exhibited decreased expression of muscle-specific atrophic genes, and promoted myogenic differentiation and increased muscle mass and strength in a dose-dependent manner (p < 0.05). Conclusion: These findings indicate that GEF may have potential uses in preventing sarcopenic obesity by promoting energy expenditure and attenuating skeletal muscle atrophy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.217-220
• /
• 1995

By substituting Cd$\^$2+/ into both A-site and B-site in PNN-PZ-PT ternary perovskite material, it is possible to determine the effects of the substitution site of Cd$\^$2+/ on sintering behavior. Sintering was performed in the temperature range from 1000$^{\circ}C$ to 1300$^{\circ}C$. The substitution site of Cd$\^$2+/ is identified by XPS spectra. Although Cd$\^$2+/ is substituted into both A-site and B-site in PNN-PZ-PT, Cd$\^$2+/ prefers A-site to B-site. The density is influenced by substitution site of Cd$\^$2+/. If Cd$\^$2+/ replaces Pv$\^$2+/, weight gain is observed during sinterig process. On the contrary, if Cd$\^$2+/ replaces Ni$\^$2+/, weight loss is promoted during sintering. From these weight changes, it is believed that Cd$\^$2+/ changes the bonding strength between B-site cation and oxygen of octahedron in perovskite structure. The changes of lattice parameters as a function of Cd$\^$2+/ content were consistent with those of the bonding strength. The densities of A-site-doped compositions were higher than those of B-site-doped composition.

• Composites Research
• /
• v.12 no.6
• /
• pp.83-89
• /
• 1999

The impact strength and fracture behavior of rubber/polymer composites were investigated with respect to two factors: (i) characteristic ratio, $C_{\infty}$ as a measure of chain flexibility of the polymer matrix and (ii) the rubber particle size in polymer blend system. In this study C was controlled by the composition ratio of polyphenylene oxide (PPO) and polystyene (PS). Izod impact test and fractographic observation of the fracture surface using scanning electron microscope were conducted. Finite element analysis were carried out to gain understanding of plastic deformation mechanism (shear yielding and crazing) of these materials. Shear yielding was found to be enhanced when the flexibility of matrix polymer was relatively low and the rubber particles were small.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.785-788
• /
• 2008

Ceramics manufactures in the nation produced more than 5,000 tons of waste pottery a year increasing industrial waste quantity. However, Almost researches were made to reduce environmental pollution and recycle waste ware. It is needed that they are used as recycled materials in order to prevent environmental pollution and gain economic profits. Therefore, the purpose of this study is to present the method of utilizing the recycled cements that are obtained from waste pottery. The test results that replacement of waste pottery powder by cement admixture at the level 10% had effect on the stripping strength(compressive strength). Also, When GBFS and WP used by cement admixture, WP is better than GBFS.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.2
• /
• pp.135-140
• /
• 2017

As an elementary investigation to develop vegetation concrete with a relatively low pH value, magnesia-phosphate composites (MPC) were examined according to the phosphate types including Monoammonium, Monosodium, Monopotassium, Monocalcium, Diammonium, Disodium, Dipotassium, and Diacalcium phosphates. All of the MPC binders, the ratio of magnesia to phosphate was fixed to be 7:3. MPC mortars activated with Disodium, Dipotassium, and Diacalcium phosphates showed no compressive strength gain, even at age of 28 days. Meanwhile, MPC mortars with Monoammonium and Monosodium phosphates developed 28-day compressive strength of more than 34MPa, and showed a relatively low pH value below 9.8. Hence, Monoammonium and Monosodium phosphates have potentials as an activator for producing MPC-based vegetation concrete.

• Korean Journal of Materials Research
• /
• v.21 no.3
• /
• pp.161-167
• /
• 2011

The stress-strain responses and oxidation properties of cold-rolled Zr-1.5Nb-O and Zr-1.5Nb-O-S alloys were studied. The U.T.S. (ultimate tensile strength) of cold-rolled Zr-1.5Nb-O-S alloy with 160 ppm sulfur (765 MPa) were greater than that of Zr-1Nb-1Sn-0.1Fe alloy (750 MPa), achieving an excellent mechanical strength even after the elimination of Sn, an effective solution strengthening element. The addition of sulfur increased the strength at the expense of ductility. However, the ductile fracture behavior was observed both in Zr-Nb-O and Zr-Nb-O-S alloys. The beneficial effect of sulphur on the strengthening was observed in the cold rolled Zr-1.5Nb-O-S alloys. The activation volume of cold-rolled Zr-1.5Nb decreased with sulfur content in the temperature region of dynamic strain aging associated with oxygen atoms. Insensitivity of the activation volume to the dislocation density and the decrease of the activation volume at a higher temperature where the dynamic strain aging occurs support the suggestion linking the activation volume with the activated bulge of dislocations limited by segregation of oxygen and sulfur atoms. The addition of sulfur was also found to improve the oxidation resistance of Zr-Nb-O alloys.