• Land and Housing Review
• /
• v.10 no.3
• /
• pp.17-22
• /
• 2019

In recent years, crime has been steadily increasing, causing not only economic damage but also aggravating the social atmosphere. The CPTED(Crime Prevention Through Environmental Design) guideline, which is an environmental crime prevention design technique, reduces the possibility of crime by implementing a proper defensive design plan through appropriate lighting design in the city and reduces the fear of crime. Among the various principles of CPTED, the proper use of street lamps and CCTV is considered to be an important factor in enabling natural surveillance. In this study, the authors identified and quantified the current status of the installation of street lamps and CCTV in each autonomous district of Seoul. The physical quantity of lighting and social factor quantified from light lamps and CCTV data, respectively, were expected to support the guidelines presented by CPTED. Therefore, we conducted statistical analysis based on quantified values and found that street lamps and CCTV had a statistically significant relationship with crime rate. In addition, the correlation between the safety index and the crime rate, calculated by dividing the number of street lamps and CCTVs by area, was also analyzed and an R2 value of 0.647 was confirmed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2135-2140
• /
• 2015

In this paper, proposed a new lighting control system which can reduce power consumption compared to conventional street lamps and intelligently control the light efficiently depending on whether there is a vehicle on the street. The new lighting control system proposed by this paper detects the presence of cars by collecting and analyzing sounds generated by the movement of cars. Then, the system controls lighting of street lamps based on the above car detection information, and turns on the street lamps sequentially by transmitting the car detection information. Experimental results showed that lightings were controlled based on the presence of cars and that operations of the lamps were made by turning on the lights sequentially by determining the moving direction of cars. This system is considered a technology that can reduce energies by applying to local roads with a few cars moving or national highways where lights are always turned on with low energy efficiency.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.3
• /
• pp.230-236
• /
• 2016

This research attempted simplifications to the LED street light for price competitiveness. The street light was simplified by replacing the SMPS with an IC driver on the PCB using an AC-type LED. The optical element that shape of a line-shaped lens covered LED crowded. Thus, this study aims to improve LED efficiency by using the minimum optical system. In order to satisfy the M3 regulation of street lighting at grade, the lens was divided into two parts depending on the forward direction of the light. Further, the changes in the number of LEDs located on part 1 and part 2 of the lens were analyzed. Through simulation, we determined the proper light distribution that meets M3 regulation of street lighting.

• JOURNAL OF ELECTRICAL WORLD
• /
• no.12 s.72
• /
• pp.28-30
• /
• 1982

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.3
• /
• pp.609-613
• /
• 2010

In this paper, we optimized and simulated the heatsink of 75W LED module for street lighting and evaluated the optical properties with the manufactured heatsink. the structure of LED package make simple as chip and heatslug and thermal flow is analyzed by using the FEM(Finite Element Method) with CFdesign V10. Also, we measured the temperature of heatsink and evaluated the optical properties with infrared thermal image camera and integrated sphere system for luminous flux in $1\;[m^3]$ box. As results, Heatsink optimized in 3 mm pin thickness, 6 mm base thickness and 16 number of pin count by using Heatsink-designer and got the results which is the temperature of $47.37\;[^{\circ}C]$ and thermal resistance of $0.48407\;[W/^{\circ}C]$. In thermal flow simulation, the temperature of heatsink decreased from $51.54\;[^{\circ}C]$ to $51.51\;[^{\circ}C]$ and the temperature of heatsink by the time in real measurement decreased from $47.03\;[^{\circ}C]$ to $46.87\;[^{\circ}C]$. Moreover, we improve 0.68 % in the decreased ratio of the luminous flux.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.2
• /
• pp.238-244
• /
• 2010

In this paper, we studied electrical characteristics of internal converter type of LED lamps for road and street lighting. We surveyed electro-technical regulations and KS(Korean industrial standards) about LED luminairs. Waveforms of voltage and current, thermal distributions, insulation resistances between live parts and exposed conductive parts, and flame test of cover of LED lamps were experimented and analyzed. In regulations, insulation resistance between live conductors and exposed conductive parts should be greater than $0.2M{\Omega}$ in case nominal voltage of wiring is 220V. In KS codes, the value of insulation resistance should be greater than $2M{\Omega}$ while applying DC 500V or DC 100V. In the result of this study, waveforms of primary voltage and current were distorted. There was difference in waveforms of secondary voltage and current according to composition of converter. Mostly, insulation resistances were measured high more than regulation and code value but some measured points were measured badly($0.0M{\Omega}$). Cover of LED lamps was ignited easily. We expect that the results of this study would be helpful for revision of regulations and national codes for the electrical safety of LED road and street lighting.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.429-436
• /
• 2013

In this study, we researched a pendant-type aspherical optical system, which could be applied to street lighting and security lighting in Europe. The goal of this research was eco-friendly artificial lighting that could be used for the one-to-one replacement of ordinary lighting. LED lighting was miniaturized by using one COB LED Module and one aspherical optical system, which could control the luminosity of the LED. Through the aspherical optical system, the light distribution angle could be controlled in a range of $140^{\circ}$ for the X-axis and $40^{\circ}$ for the Y-axis. This means that this optical system is appropriate for catenary-type lighting, which is widely used in Europe on both narrow and broad roads. The performance was determined using a lighting simulation program. This lighting system simulation showed that road rates M4 and M5 could be satisfied, with the condition of a 13-m height and 50-m distance (U0 and TI). The simulation program estimated that light pollution, which disturbs sleep, could beeliminated in the European streetlight case. Determining methods for the light distribution control, performance, and optimal lighting setup conditions is very important to prevent light pollution. Moreover, the initial step of developing the lighting system design and post management will require an effort with much analysis.

• Journal of the Korea Furniture Society
• /
• v.25 no.4
• /
• pp.345-352
• /
• 2014

This study was carried out to develop eco-friendly wood street lamp (EFWSL) by using wood resources stacked in the forests after tree tending operations which were mostly abandoned, but economical as renewable wood resources for developing the wood coated street lamps with the effects of cost reduction and their attractive appearances. This study has led to the development of key compact structures of street-lighting wood poles (shaft) using laminated timber. The core technique in this study is related with producing the more stable wood poles (shaft) with the hole inside than wood poles exposed under the natural environment through applicable process to protect the wood from bursting and splitting. We also comprehensively developed the method to conserve the timber durability of wood shaft and connect the wood shaft with groove, race way to be located in the groove, locking ring, current stabilizer connected to the groove and luminaire support arm, base and hand-hole which was partly used in combination with steel materials and wood. Also we increased the utilization of abandoned and stacked woods after thinning in the forests such as Pinus densiflora, Larix leptolepis, and Pinus koraiensis plantations by maximizing the value of these natural wood resources as main materials of eco-friendly street lightings with the effects of cost reduction and attractive appearances and also the expectation of advertising effects of street lightings developed in this study.

• KIEAE Journal
• /
• v.9 no.6
• /
• pp.45-50
• /
• 2009

Nowadays, the lighting of urban nightscape has become important for improvement in city. Lighting the outdoor is different that lighting an interior. Outdoor lighting designs should be designed to minimize glare, light trespass, light clutter and energy conservation to avoid light pollution. Mokpo city launched into a large scale project of the city beautification using outdoor lighting. However, outcomes of outdoor lighting project have faced strong opposition from environmental groups. This study aims to analyze the light pollution of outdoor lighting in Mokpo-si for creating a health night environment. The Radiant Imaging Prometric-1400 was used to measure the luminance of Yudal Mountain, Goha Island and Luminarie Street. The result showed that the all the outdoor lighting produce light pollution and some places like mountain and island did not need a lot of lighting all the time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2294-2297
• /
• 2011

The research which sees currently inspects the damage of the street lamp circuit which is used selectively the diode for developed. Street lamp diagnosis is developed will grasp the lighting presence of LED indication systems and will be able to inspect selectively. The case where the street lamp will not light, will be able to indicate with the relationship of LED putting out lights where the breakdown should have occurred in which part. Circuit produced PCB borads and the system will be able to confirm the breakdown point location of street lamp individual grade developed.