• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1779-1788
• /
• 2012

Recently, demands of application services in consideration of interior environment according to the stream of times, Ubiquitous. In case of interior location-based service, WLAN is now mostly used. But it is largely affected by environmental changes. To solve this problem, lots of studies on UWB are underway. The reason why studies on UWB are much made lies in that it is not much affected by environment changes owing to radio wave characteristics. So this study suggests the location correction algorithm which derives values with less influence of environment and high accuracy and corrects with more accurate location information using Ubisense system based on UWB technologies. The location correction algorithm suggested is one made after constructing environment database and use it to estimate more accurate location from the location measuring system in a high position.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.75-87
• /
• 2009

It is difficult to support QoS service in existing MAC Protocols in Wireless Mesh Network environments. while DCF can not support QoS, EDCA is operated with prioritized channel access method but can not give full performance. This thesis proposes frame management method to support QoS in Multi-Media DCF(MMDCF) MAC Protocol working in wireless mesh network. MMDCF uses ACH phase in TDMA frame to perform selection and elimination. Prioritized phases's count m and Fair Elimination phases's count n determine contention level and make string probability to only one win the contention. Forced TDMA Frame release method can support QoS requirements. MMDCF results good performance and good channel efficiency to support QoS requirements better than EDCA in multimedia stream environments.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.4
• /
• pp.1-12
• /
• 2009

An RFID application needs to collect product's information scattered over the RFID network efficiently according to the globalization of RFID applied enterprises. To be informed of the stock status of products promptly in the supply chain network, especially, it is necessary to support queries that retrieve statistical information of tagged products. Since existing RFID network does not provide these kinds of queries, however, an application should request a query to several RFID middleware systems and analyze collected data directly. This process makes an application do a heavy computation for retrieving statistical information. To solve this problem, we define a new Distributed Continuous Query that finds information of tagged products from the global RFID network and provides statistical information to RFID applications. We also propose a Distributed Continuous Query System to process the distributed continuous query efficiently. To find out the movement of products via multiple RFID systems in real time, our proposed system uses Pedigree which represents trade information of items. Our system can also reduce the cost of query processing for removing duplicated data from multiple middleware systems by using Pedigree.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.75-84
• /
• 2017

It becomes more and more more important for the storage that supports high speed recording and stable access from network environment. As one field of basic science which produces massive astronomical data, VLBI(: Very Long Baseline Interferometer) is now demanding more data writing performance and which is directly related to astronomical observation with high resolution and sensitivity. But most of existing storage are cloud model based for the high throughput of general IT, finance, and administrative service, and therefore it not the best choice for recording of big stream data. Therefore, in this study, we design storage system optimized for high performance of I/O and concurrency. To solve this problem, we implement packet read and writing module through the use of libpcap and pf_ring API on the multi core CPU environment, and build a scalable storage based on software RAID(: Redundant Array of Inexpensive Disks) for the efficient process of incoming data from external network.

• Journal of Broadcast Engineering
• /
• v.21 no.4
• /
• pp.506-514
• /
• 2016

In this study, HEVC over DVB-T2 systems with a bandwidth of 6 MHz is considered, particularly for the terrestrial 4K-UHDTV broadcasting service in the Republic of Korea. The threshold of visibility carrier-to-noise power ratio (ToV C/N) and the receiver minimum required input level (sensitivity) for satisfying the subjective picture failure (SPF) condition are measured in the laboratory. It is observed, for transmitting 26.37 Mbps data stream correctly, that ToV C/N is 18.8 dB on average, and the receiver sensitivity is varied from minimum -84.2 dBm to maximum -80.0 dBm. Based on the results, the receiver noise floor is calculated by -100 dBm on average.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.811-823
• /
• 2011

This paper proposes an efficient transmission method for the panoramic multimedia contents. The panoramic video provides wide sight and various view-point to the user. The traditional methods of the panoramic multimedia content transmission has several limitations, as follow; A client suffers a long initial delay time to play a panoramic video when it is transmitted through a limited bandwidth network, because the panoramic video has larger data size than a general video. And if a client's display device has limited resolution, such as mobile phone, laptop PC monitor, etc. it can not display the entire panoramic video that has a wide view video sequence. So, in order to overcome the obstacles, this paper proposes an efficient transmission of panoramic multimedia contents. This method will increase the transmission efficiency throughout the technique of the scene description in MPEG-4 system. Also we demonstrated the efficiency of the proposed method by comparison with existing methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.78-83
• /
• 2006

In this paper, we propose Active bandwidth allocation scheme of multiplexed streamed MPEG video sequences over BcN network. In order to real time processing, multiplexed source is estimated by linear-prediction per measurement period. n the result target quality value were not sufficient, we proposed a over-allocation method and a reallocation one to guarantee QoS. We used two kinds of sources, one is random multiplexed source made of four different video sources, the other is the one considered the arrange of I frame in the sequence. With those sources, we analyzed the linear prediction, compared over-allocation with reallocation method. As a result, In both schemes, the objected target quality value is achieved, the sufficient valuce bandwidth under 10% when measurement period is over 1.8 sec, the utilization is over 0.9. Especially, the Target of quality value of the reallocation scheme is better at the same condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.943-950
• /
• 2005

Recently, many of researches on stream transmission for satisfying each of different real-time transmission condition of the multimedia data that demands various service quality through high-speed networks have been studied actively. In this paper, we design a scheme that discriminately reserves the network resources for the transmission of each multimedia application and propose a bandwidth allocation scheme for improving the utilization ratio of free resources. And we also propose a pipelining scheme for providing flexible real-time transmission. The proposed schemes can be used to support a real-time transmission by applying feedback transmission control method based on receiving buffer for guaranteeing the synchronization conditions requested by the multimedia data. Moreover, we propose a transmission control scheme that can take the amount of network resources down to the minimum amount within the range of permissible error-range under the guarantee with no quality degradation simultaneously when the bottleneck is caused by the network congestion. Finally, we propose a dynamic bandwidth smoothing scheme that can smooth the maximum bandwidth to the demand of each video steam for giving continuous transmission to the delay sensitive video steam between senders and receivers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.9
• /
• pp.2894-2900
• /
• 1996

The stream generator tubes represent an integral part of a major barrier against the fission product release to the environment. So, the rupture of these tubes could permit flow of reactor coolant into the secondary system and injure the safety of reactor coolant system. Therefore, if the crack was detected during In-Service Inspection of tubes the cracked tube should be evaluated by the pulgging criteria and plugged or not. In this study, the fracture mechanics evaluation is carried out on the thru-wall axial crack due to Primary Water Stress Corrosion Cracking in the roll transition aone of steam generator tube to help the assurence the integrity of tubes and estabilish the plugging criteria. Due to the Inconel which is used as tube material is more ductile than others, the plastic instability repture theory was used to calculate the critical and allowable crack length. Based on Leak Before Break concept the leak rate for the critical crack length and the allowable leak rate are compared and the safety of tubes was given.

• Environmental and Resource Economics Review
• /
• v.18 no.2
• /
• pp.345-375
• /
• 2009

In this paper we examined the impact of mineral resources industry on the national economy and necessity of a mineral resources cycle technology development. For this purpose, the case study on Gagok polymetallic (zinc-lead-copper) mine, which is being re-developed, was carried out to study an anticipated effects of application of the full cycle technology. As a consequences of the study, if we apply the technology to a polymetallic (zinc-lead-cooper) mine, we can expect 55 billion won worth of import-substitution effect. Moreover, if applied to 10 similar mines, we can expect the 10.4% of import-substitution effect of the total imports annually. Also, national competitiveness in value chain of mineral industry will be promoted through the technological advancement in upper stream and the full cycle technology will render a service to the mineral industry to be the country's new growth engine.