• Toxicological Research
• /
• 제28권3호
• /
• pp.151-157
• /
• 2012

This paper describes the effects of thermally oxidized tallow on the serum lipids profile and radical scavenging activity (RSA) of the lipids extracted from the different tissues of the rabbits. Tallow was thermally oxidized at $130^{\circ}C$ for 9, 18, 27, 36 and 45 h respectively. Thermally oxidized tallow was fed to the local strain of Himalayan rabbits for one week. Results show that oxidation increases the formation of hydroperoxides and decrease the level of radical scavenging activity of the tallow. The rabbit serum lipids profile showed a dose dependent increase in triglyceride, total cholesterol and LDL-cholesterol. However, no statistically significant increase was observed in the HDL-cholesterol with an increase of oxidation time. Serum glucose and rabbits body weight decrease significantly (p < 0.05) and was highly correlated with the serum lipids profile. The percent RSA of the lipids extracted from the liver, brain and muscles tissues showed a significant decrease with respect to 0.5, 1.0 and 1.5 g/body weight as well as oxidation time. Data suggests that thermal oxidation and use of thermally oxidized beef tallow is harmful and therefore an alternative way of cooking should be used.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.156-161
• /
• 2002

It depends on the joint configuration, dimensions and constraints on the joint whether the residual stress at the root of single-sided butt weld is tensile or not. Therefore, recommendation is generally made that high R ratio should be used in the fatigue test of this type of joint in order to prevent excessively long life caused by compressive residual stress. in this research, the residual stress profile in butt weld joint was obtained through compliance method, using successive extension of a slot and measurement of the variation of strain during the slot extension. The residual stress profile was firstly assumed to be the linear summation of Legendre polynomials up to 9th order excluding 0th and 1st order. Strain variation on the surface was measured while the slot was being extended by cutting to find out the 8 unknown coefficients of each polynomial tenn. The cut was made by the electric discharge machine. It was concluded that the residual stress near the surface stayed positive, however, it turned into the negative value as soon as it passed through 2 or 3 mm depth. Several fatigue tests were also carried out under zero stress ratio. Test results showed that fatigue life coincides well with the design cuive of butt joint in British Standards, which supports that it is tensile residual stress that exists near the weld root.

• 대한토목학회논문집
• /
• 제2권3호
• /
• pp.75-86
• /
• 1982

본 연구에서는 3절점, 6자유도를 갖는, 종래의 Timoshenko 보 이론에 근거한 깊은 보(Thick beam) 요소(DB6)와 3절점, 7자유도를 갖는 3차 축방향변위를 가정한 고차 보 요소(DB7)의 3차원 연속체로부터의 Degeneration을 보여 주고 있다. DB6 보 요소는 전단변형률의 비살제적인 선형분포를 보완하기 위하여 전단계수(shear coefficient)를 도입하고 있는 반면 고차 DB7 보 요소는 보다 실제적인 전단변형률의 2차분포를 가정하고 있다. 이 들 두 보 요소를 이용하여 계산된 해(解)는 Timoshenko 방정식의 해(解), 얕은 보(Thin beam)의 해(解) 및 다른 여러 보 요소들의 해(解)와 비교된다. 본 연구의 결과는 고차 DB7 보 요소가 보의 정력화적 해석이나 자유진동 해석에 있어서 다른 보 요소들에 비해 월등히 정확함을 보여주고 있다.

• 한국토양비료학회지
• /
• 제50권6호
• /
• pp.562-573
• /
• 2017

Some symbiotic characteristics of native Korean Rhizobium leguminosarum biovar viciae were analysed to get some informations desirable for cultivation of hairy vetch (Vicia villosa Roth) using its symbiont in Korea. The size of indigenous populations of R. leguminosarum biovar viciae was higher in seven upland soils showing $1.7{\times}10^2{\sim}5.8{\times}10^4cells\;g{\cdot}soil^{-1}$, which appeared to be 10% and 37% higher for cultivated and uncultivated soils of hairy vetch, respectively, than seven paddy soils with $1.7{\times}10^2{\sim}1.7{\times}10^4cells\;g{\cdot}soil^{-1}$. In symbiotic potentials, however, the yields of hairy vetch treated with 10-fold-diluted ($10^{-1}$) inoculum and 1000-fold-diluted ($10^{-3}$) one was 11.2% and 8.8% more, respectively, in paddy than upland. Hairy vetch inoculated with either strain KHR 106 from Sacheon or strain KHR 120 from Yesan among native Korean R. leguminosarum biovar viciae isolates was of similar yield increment of 16% (p < 0.05) in upland soils with native R. leguminosarum biovar viciae of $5.8{\times}10cells\;g{\cdot}soil^{-1}$. In case of coinoculation of the two strains, however, the yields was not significantly increased. In especial, isolate KHR 106, KHR 120, and KHR 122 from Suwon, which has also good symbiotic effectiveness, showed different protein profile patterns each other. As a result, hairy vetch is possibly able to use atmospheric nitrogen through symbiotic relationship with diverse native R. leguminosarum biovar viciae in Korean arable lands. For safe and good production of hairy, however, the use of superior strains with high symbiotic effectiveness and competitiveness will be desirable.

• 한국어병학회지
• /
• 제34권1호
• /
• pp.31-38
• /
• 2021

본 연구는 1996년부터 2010년 사이에 우리나라 양식넙치와 뱀장어에서 분리하여 Edwardsiella tarda로 동정하였던 18 균주에 대하여 생화학적 특성과 RAPD profile을 비교해봄으로써 이전 양식생물의 질병에 관여되었던 Edwardsiella속 세균의 다양성을 알아보고자 하였다. 생화학적 특성으로 볼 때 이들은 citrate 분해, H₂S 그리고 indole 생산 결과에 차이를 보여 4가지 패턴으로 구분되었으나 모두 E. tarda로 동정되었고 숙주에 따른 분리균의 특성으로 구분되지는 않았다. E. tarda 특이 primer인 EDtT로 PCR을 실시한 결과 18 분리균에서는 모두 약 270 bp의 동일한 band가 검출되었으나 비교 균주로 사용된 E. tarda와 E. ictaluri의 type strain에서는 특이 밴드가 검출되지 않았다. 또한 Ready-To-Go-RAPD kit의 primer 5번과 6번으로 실시한 RAPD PCR 결과, 넙치 분리균, 뱀장어 분리균, 그리고 E. tarda와 E. ictaluri type strain에서 band profile이 뚜렷한 차이를 보여 origin에 따른 특징으로 정리될 수 있었으며 병원체 모니터링을 위한 tool의 하나로 개발될 가능성을 보였다.

• Computers and Concrete
• /
• 제15권6호
• /
• pp.951-972
• /
• 2015

The focus of the present study is to investigate both local and global behaviour of a precast concrete sandwich panel. The selected prototype consists of two reinforced concrete layers coupled by a system of cold-drawn steel profiles and one intermediate layer of insulating material. High-definition nonlinear finite element (FE) models, based on 3D brick and 2D interface elements, are used to assess the capacity of this technology under shear, tension and compression. Geometrical nonlinearities are accounted via large displacement-large strain formulation, whilst material nonlinearities are included, in the series of simulations, by means of Von Mises yielding criterion for steel elements and a classical total strain crack model for concrete; a bond-slip constitutive law is additionally adopted to reproduce steel profile-concrete layer interaction. First, constitutive models are calibrated on the basis of preliminary pull and pull-out tests for steel and concrete, respectively. Geometrically and materially nonlinear FE simulations are performed, in compliance with experimental tests, to validate the proposed modeling approach and characterize shear, compressive and tensile response of this system, in terms of global capacity curves and local stress/strain distributions. Based on these experimental and numerical data, the structural performance is then quantified under various loading conditions, aimed to reproduce the behaviour of this solution during production, transport, construction and service conditions.

• Journal of Microbiology and Biotechnology
• /
• 제14권5호
• /
• pp.1057-1062
• /
• 2004

The entomopathogenic bacterium Bacillus thuringiensis is the most widely used biopesticide. Insecticidal proteins, coded by genes located in plasmids, form typical parasporal, crystalline inclusions during sporulation. We isolated a Bacillus thuringiensis strain having insecticidal activity against larvae of the house fly (M. domestica) from the soils at a pig farm in Korea, and named it Bacillus thuringiensis SM. The culture filtrate from Bacillus thuringiensis SM showed strong lethality (83.3%) against M. domestica larvae. The parasporal crystal is enclosed within the spores' outermost envelope, as determined by transmission electron microscopy, and exhibited a bipyramidal form. The crystal proteins of strain SM consisted of five proteins with molecular weights of approximately ~130, ~80, ~68, ~42, and ~27 kDa on a 10% SDS-PAGE (major band, a size characteristic of Cry protein). Examination of antibiotic resistance revealed that the strain SM showed multiple resistant. The strain SM had at least three different plasmids with sizes of 6.6, 9.3, and 54 kb. Polymerase chain reactions (PCRs) revealed the presence of cry1, cry4A2, and cry11A1 genes in the strain SM. The cry1 gene profile of the strain SM appeared in the three respective products of 487 bp [cry1A(c)], 414 bp [cry1D], and 238 bp [cry1A(b)]. However, the strain SM has not shown the cry4A2 md cry11A1 genes. In in vivo toxicity assays, the strain SM showed high toxicity on fly larvae (M. domestic) [with $LC_{50}$ of 4.2 mg/ml, $LC_{90}$ of 8.2 mg/ml].

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.229-232
• /
• 2003

In the roll forming process, a sheet or strip of metal is continuously and progressively formed into a desired cross-sectional profile by feeding it through a series of forming roll. Accordingly, it is important to maintain the material properties of the initial sheet and deform uniformly during the roll forming. The roll forming process was estimated in consideration of some factors such as material properties, strip thickness, roll diameter, roll velocity, and the deformation of the material that influence the forming length. The hydroforming technology has been recognized as a new technique in manufacturing industry, especially in automotive industry. The formed pipe in used in hydroforming process is manufactured by the roll forming. The formability during hydroforming is very sensitive to the state of pipes which are made by roll forming. Particularly the amount of hardening during roll forming affects the formability. Therefore, it is necessary to design the optimum roll flower to reduce the local hardening. In this paper, optimum roll flower which has uniform strain distribution through sheet width was obtained by comparing strain distribution in various roll flower. Finite element analysis(FEA) is performed to estimate the strain distribution related to hardening by roll forming. A numerical analysis is carried out by SHAPE-RF.

• Journal of Microbiology and Biotechnology
• /
• 제20권2호
• /
• pp.410-414
• /
• 2010

A bacterial strain, 13-$25^T$ with xylanolytic activity isolated from a single soil sample, was characterized with respect to its phenetic and phylogenetic characteristics. The cells of the isolate are Gram-staining variable rods, but spore formation was not observed. This strain is catalase- and oxidase-positive, and able to degrade starch and xylan. The predominant fatty acids are anteiso-$C_{15:0}$, $C_{16:0}$, and iso-$C_{16:0}$. The major respiratory quinone is menaquinone 7(MK-7), with a polar lipid profile consistent with the genus Cohnella. The DNA G+C content is 54.3 mol%. The 168 rRNA gene sequence analysis indicates that this organism belongs to the genus Cohnella, with Cohnella panacarvi as the closest phylogenetic neighbor. Low levels of 168 rRNA gene sequence similarity (<97.0%) with respect to other taxa with published names and the identification of distinctive phenetic features in the isolate indicate that the strain 13-$25^T$ represents a novel species of the genus Cohnella, for which the name Cohnella damensis sp. novo is proposed. The type strain is 13-$25^T$ (=CCTCC AB $208103^T$=KCTC $13422^T$).

• Journal of Microbiology and Biotechnology
• /
• 제21권7호
• /
• pp.697-702
• /
• 2011

A strain of the cyanobacterium Arthrospira was isolated from Lake Chahannaoer in northern China and was characterized according to microscopic morphology, photosynthetic oxygen-evolving activity, growth rate, and nutritional profile. Compared with thermophilic Arthrospira species occurring naturally in tropical and subtropical lakes, this isolate is mesophilic and grows optimally at ${\sim}20^{\circ}C$. The total protein, fatty acid, phycocyanin, carotenoid, and chlorophyll a contents were 67.6, 6.1, 4.32, 0.29, and 0.76 grams per 100 grams of dry weight, respectively. The strain is rich in polyunsaturated fatty acids (PUFAs). An essential omega-3 fatty acid, docosahexaenoic acid (DHA), was detected, and ${\gamma}$-linolenic acid (GLA) and DHA accounted for 28.3% of the total fatty acid content. These features of this newly isolated strain make it potentially useful in commercial mass culture in local areas or as a biofuel feedstock. It is also an alternative resource for studying the metabolic PUFA pathways and mechanisms of cold stress tolerance in cyanobacteria.