• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.418-421
• /
• 2007

For Shock obsorber piston led is launched to the market through luring, milling, grooving, rolling, inspection and finally packing processes, To this time around 11 items, that is, out diameter and length etc..for the piston lod are inspected strictly as a total inspection. Piston Lod is being produced 30,000 a day and its excessively repeating inspection is getting induce repetition strain injury and reduce production rate as fatigue accumulation of worker increase inspection errors. Therefore, for the inspection process is severely needed a progressive improvement through the automation. In this study, we consider automation method of piston led inspection process and suggest an efficient automation strategy as improving the various problems in present manual inspection way.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.103-109
• /
• 2005

Since fretting fatigue damage accumulation occurs over relatively small volumes, the role of the microstructure is quite significant in fretting fatigue analysis. The heterogeneity of discrete grains and their crystallographic orientation can be accounted for using continuum crystallographic cyclic plasticity models. Such a constitutive law used in parametric studies of contact conditions may ultimately result in more thorough understanding of realistic fretting fatigue processes. The primary focus of this study is to explore the influence of microstructure as well as the magnitude of the normal force and tangential force amplitude during the fretting fatigue process. Fretting maps representing cyclic plastic strain behaviors are also developed to shed light on the cyclic deformation mechanisms.

• Microbiology and Biotechnology Letters
• /
• v.19 no.1
• /
• pp.94-99
• /
• 1991

- The further study for the identification of the previously reported pink-pigmented facultative methylotrophic bacterium (PPFM) GL-10 was carried out. The PPFM GL-10 was Gram nagative, rod, and motile by a single polarly inserted flagellum. The colonies were smooth, pink, circular, along with convex with entire margin. The isolate could utilize C1 compounds and a variety of multicarbon substrates as sole carbon and energy source. The isolate was obligately aerobic, and exhibited both catalase and oxidase activities. The deoxyribonucleic acid base composition was 65-67 mol% guanine plus cytosine. The isolate was mostly identical with Methylobacterium extorquens and named Methylobacterium sp. strain GL-10. Methylobacterium GL-10 accumulated a copolyester of 3-hydroxybutyrate and 3-hydroxyvalerate (poly-3HB/3 HV) when grown in nitrogen-free culture media containing sodium propionate as substrate at the second polyester accumulation stage. The composition of copolyester, as determined from $^1h$ NMR spectra, was 23 mol% of 3-hydroxyvalerate (3HV).

• Transactions of Materials Processing
• /
• v.10 no.3
• /
• pp.206-213
• /
• 2001

Dynamic deformation of metallic materials mostly accompanies substantial amounts of deformation heat. Since the flow stress of deformation is sensitive to temperature, implication of heat due to plastic work is essential to the evaluation of constitutive relations. In this study, a series of compression tests were conducted for SAF 2507 super duplex stainless steel at various temperatures and strain rates. The accumulation of plastic work was calculated through numerical integration and converted into the elevation of temperature. Subsequent logarithmic interpolation deduced isothermal flow surfaces, which were primary input data of finite element analysis. Simple closed die forging process was analyzed and optimized with commercial FEM code applying both raw and calibrated material database. The effect of accounting deformation heat was more noticeable in high-speed forming process.

• Journal of the Korean Ceramic Society
• /
• v.35 no.7
• /
• pp.671-678
• /
• 1998

Hertzian indentation tests with sphere indenters were used to study the mechanical properties of glass-in-filtrated alumina and spinel composites and evaluated the effect of preform microstructure and evaluated the effect of preform microstructure and glass con-tents on contanct damage and strength. The spinel composite showed more brittle behavior than the alumina composite which is verified from indentation stress-strain curve cone cracks and quasi-plastic deformation developed at subsurface. Failure originated from either cone cracks(brittle mode) or deformation zone(quasi-plastic mode) above critical load for cracking(Pc) and yield ({{{{ {P }_{Y } }}) with the brittle mode more dominant in the spinels and the quasi-plastic mode more dominant in the aluminas. Even though brittle mode was dominant in the spinel composites the strength degradation from accumulation of damage above these critical loads was conspicuously small suggesting that the glass-infiltrated composites should be highly damage tolerant to the blunt contacts.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.464-471
• /
• 2003

Among various methods to acquire high strength in plain carbon steel, the mettled of grain refinement by controlling thermo-mechanical processing parameters has gained a great attention if steel rolling industries. In the present study, three different rolling pass schedules are proposed to obtain fine grains which are based on combined results of recrystallization modelling, finite element analysis and experiment. Since meta-dynamic or dynamic recrystallization has been found to be very effective in producing fine grains, reduction ratio and interpass time in the proposed rolling pass schedules were determined in order to invoke such recrystallization as often as possible.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.633-638
• /
• 1997

This study was performed to investigate the fatigue behaviour and fatigue damage process of RC structures under repeated load. Especially, the behavior of RC beams subjected to flexure-shear force has been focused. The test results show that the deflections of beam and the strains of longitudinal steels and stirrups under cyclic loads increase with constant rate, and these increases depend on diagonal crack openings and strain increases. The present study provides useful data for the analysis of damage accumulation of reinforced concrete beams under repeated loadings.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.243-244
• /
• 2001

Vibrio choleae non-O1 has been reported to cause food borne gastroenteritis. This strain produces therm()stable direct hemolysin (NAG-rTDH) similar with that of Vibrio parahaemolyticus. As a result of rabbit ligated intestinal loop test, TDH caused fluid accumulation and is considered to be the major virulent factor. Hemolysis by TDH has been reported to cause colloid osmotic lysis of erythrocytes. (omitted)

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.4
• /
• pp.189-196
• /
• 2020

In this study, two full-scale gravity load-designed reinforced concrete corner beam-column joints were tested by being subjected to uniand bi-directional cyclic lateral loading. The test variable was loading type: uni- or bi-directional loading. To investigate the effect of the loading type on the cyclic behavior of joint specimens, damage progression, force-deformation relation, contribution of joint deformation to total drift, joint stress-strain response, and cumulative energy dissipation were investigated. The test data suggest that bidirectional loading can amplify damage accumulation in the joint region.

• Composites Research
• /
• v.12 no.2
• /
• pp.62-69
• /
• 1999

During fatigue loading of composite materials, damage accumulation can be monitored by measuring their material properties. In this study, fatigue modulus is used as the damage index. Fatigue life of composite materials may be predicted analytically using damage models which are based on fatigue modulus and resultant strain. Damage models are propesed as funtions of applied stress level, number of fatigue cycle and fatigue life. The predicted life was comparable to the experimental result obtained using E-glass fiber reinforced epoxy resin materials and pultruded glass fiber reinforce polyester composites under two-stress level fatigue loading.