• The Plant Pathology Journal
• /
• v.25 no.4
• /
• pp.369-375
• /
• 2009

The potential antiviral effects of the culture filtrates (CF) from Serratia marcescens strain Gsm01 against yellow strain of Cucumber mosaic virus (CMV-Y) were investigated. The culture filtrate of S. marcescens strain Gsm01 applied on Chenopodium amaranticolor showed high inhibitory activity, likewise no necrosis appeared when applied on the tobacco plants 2 days before CMV-Y inoculation. When plants were challenge inoculated with CMV-Y for eighteen days, the disease incidence in plants with culture filtrate of S. marcescens Gsm01 did not exceed 59%, whereas 100% of control plants were severely infected. The results of double antibody sandwich-enzyme linked immunosorbent assay (DAS-ELISA), reverse transcriptase polymerase chain reaction (RT-PCR), dot blotting, and western blotting showed that culture filtrate treatment highly affected the accumulation of CMV-Y or its CP protein gene in the treated plant leaves. It was also observed that the culture filtrate had no RNase activity on genomic RNAs of CMV-Y, suggesting that culture filtrate may not contain ribosome inactivating proteins (RIPs) or proteins with RNase activity. These data shows that culture filtrate of S. marcescens strain Gsm01 seems to be a promising source of antiviral substance for the practical use.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.2
• /
• pp.140-149
• /
• 1985

Fully reversed push-pull low cycle fatigue tests under strain control of trapezoid cyclic mode have been conducted in air at temperature of 550.deg. C and with frequency of 0.5 cpm on the domestic stainless steel STS 316 after solution treatment for 1 hour at 1100.deg. C. As an experimental equipment for high temperature fatigue tests, an electric servo-hydraulic fatigue machine(Instron model 1350) was used. This paper presents the effects of creep hold time and plastic strain range on push-pull high temperature low cycle fatigue life and fracture behavior. The fracture surfaces were observed by means of the scanning electron microscope. The results are as follows. (1) The fatigue life decreases with increase of the plastic strain range equal hold time and also decreases as the hold time is getting longer. (2) The frequency modified damage function can predict fatigue life by incorporating a variation of Coffin's frequency modified approach into damage function. (3) The ratios of creep damage and fatigue damage can be calculated by using he linear accumulation damage concept and the ratio of creep damage increases as the hold time is getting longer. (4) At the creep hold time of 5 minutes and the strain range of 2.0%, the fracture mode was intergranular fracture and striations were hardly observed. In this case, the intergranular cracking was originated in void type('.gamma.' type) cracking.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1163-1169
• /
• 2012

Rubber, a hyperelastic material, is the main material used in tires. During the operation of a car, the tire receives various types of loads. The accumulation of strain energy due to such loads induces tire failure. Generally, because rubber materials used for tires have stress softening characteristics, unlike metals, test methods used for metals cannot be applied to rubber. Therefore, in this study, for the evaluation of the fatigue properties of two types of specimens that have different material components, a tensile test and a fatigue test according to the extended strain range dissimilar to ASTM D4482 are performed, and fatigue life equations are proposed based on the test results.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.3
• /
• pp.387-397
• /
• 2021

There is growing interest in the production of microalgae-based, high-value by-products as an emerging green biotechnology. However, a cultivation platform for Oocystis sp. has yet to be established. We therefore examined the effects of bacterial culture additions on the growth and production of valuable compounds of the microalgal strain Oocystis sp. KNUA044, isolated from a locally adapted region in Korea. The strain grew only in the presence of a clear supernatant of Sphingomonas sp. KNU100 culture solution and generated 28.57 mg/l/d of biomass productivity. Protein content (43.9 wt%) was approximately two-fold higher than carbohydrate content (29.4 wt%) and lipid content (13.9 wt%). Oocystis sp. KNUA044 produced the monosaccharide fucose (33 ㎍/mg and 0.94 mg/l/d), reported here for the first time. Fatty acid profiling showed high accumulation (over 60%) of polyunsaturated fatty acids (PUFAs) compared to saturated (29.4%) and monounsaturated fatty acids (9.9%) under the same culture conditions. Of these PUFAs, the algal strain produced the highest concentration of linolenic acid (C18:3 ω3; 40.2%) in the omega-3 family and generated eicosapentaenoic acid (C20:5 ω3; 6.0%), also known as EPA. Based on these results, we suggest that the application of Sphingomonas sp. KNU100 for strain-dependent cultivation of Oocystis sp. KNUA044 holds future promise as a bioprocess capable of increasing algal biomass and high-value bioactive by-products, including fucose and PUFAs such as linolenic acid and EPA.

• Microbiology and Biotechnology Letters
• /
• v.9 no.2
• /
• pp.59-64
• /
• 1981

The cultural conditions and the intra cellular accumulation of cadmium was studied using a cadmium tolerant yeast strain B-7 which had been isolated from activated sludge collected from a zinc mining area. The organism was able to grow in a medium containing 3,000 $\mu\textrm{g}$/$m\ell$ of cadmium-ion. (C $d^{++}$) Optimum conditions for the growth of the organisms were 20~22$^{\circ}C$ and pH 5.0~8.0 under aerobic condition. The maximum cadmium accumulation was observed when the organism was grown at pH 6.0. The growth of B-7 was not affected by the addition of a silicone-based antifoamer, which stimulated the intra cellular accumulation of cadmium. The intra cellular cadmium accumulation started after the cell ceased to grow. One gram of cells accumulated 34.17mg of cadmium when the organism was grown in a medium containing 500 $\mu\textrm{g}$/$m\ell$ of cadmium and 0.2%, v/v silicone-based antifoamer at 28$^{\circ}C$ for 48 hours with shaking. About 73 % of the accumulated heavy metal by the organism was found in the cytoplasm.m.

• Microbiology and Biotechnology Letters
• /
• v.20 no.4
• /
• pp.363-370
• /
• 1992

Microorganisms capable of accumulating poly-p-hydroxybutyric acid(PHB) were isolated from soil by enrichment culture technique. Among them, the strain designated as FL-027 had high PHB productivity and was identified as Alcaligenes. The optimal medium composition for cell growth was 8.0 $g/\ell$ of fructose and 3.0 $g/\ell$ of $(NH_4)_2S0_4$, equivalent to C/N ratio 5.04 at pH 7.0 and $30^{\circ}C$. To investigate the optimal conditions for the PHB accumulation, we divided the process into two stages; the first stage for the growth of the cell in nutrient-rich medium and the second stage for the PHB accumulation in nutrient-deficiency medium. The optimal conditions for PHB accumulation were 8.0 $g/\ell$ of fructose and 0.25 $g/\ell$ of $(NH_4)_2S0_4$, equivalent to C/N ratio 60 at pH 6.5 and $30^{\circ}C$. PHB accumulation was stimulated by deficiency of nutrients such as $NH_4^+$, $Ca^{2+}$, $SO_4^{2+}$ in medium. Among them. $NH_4^+$ deficiency was chosen because of its effectiveness. We found the inhibition of cell growth by fructose in batch culture. In order to keep the fructose concentration at an optimal level, intermittent feeding fed-batch culture was employed, and the cell concentration as high as 10.83 $g/\ell$ whose PHB content was responsible for 43% of the dry cell weight. The purified PHB was identified as homopolymer of 3-hydroxybutyric acid by using IR and $^1H-NMR$.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.6
• /
• pp.789-796
• /
• 2000

In order to analyze the effects of tktA, $aroF^{FBR}$, and aroL expression in a tryptophan-producing Escherichia coli, a series of plasmids carrying the genes were constructed. Introduction of tktA, $aroF^{FBR}$, and aroL into the E. coli strain resulted in approximately 10-20 fold increase in the activities of transketolase, the feedback inhibition-resistant 3-deoxy-D-arabinoheptulsonate-7-phosphate synthase, and shikimate kinase. Expression of $aroF^{FBR}$ in the aroB mutant strain of E. coli resulted in the accumulation of 10 mM of 3-deoxy-D-arabinoheptulsonate-7-phosphate (DAHP) in the medium. Simultaneous expression of tktA and $aroF^{FBR}$ in the strain further increased the amount of excreted DAHP to 20 mM. In contrast, the mutant strain which has no gene introduced accumulated 0.5 mM of DAHP. However, the expression of tktA and $aroF^{FBR}$ in a tryptophan-producing E. coli strain did not lead to the increased production of tryptophan, but instead, a significant amount of shikimate, which is an intermediate in the tryptophan biosynthetic pathway, was excreted to the growth medium. Despite the fact that additional expression of shikimate kinase in the strain could possibly remove 90% of excreted shikimate to 0.1 mM, the amount of tryptophan produced was still unchanged. Removing shikimate using a cloned aroL gene caused the excretion of glutamate, which suggests disturbed central carbon metabolism. However, when cultivated in a complex medium, the strain expressing tktA, $aroF^{FBR}$, and aroL produced more tryptophan than the parental strain. These data indicate that additional rate-limiting steps are present in the tryptophan biosynthetic pathway, and the carbon flow to the terminal pathway is strictly regulated. Expressing tktA in E. coli cells appeared to impose a great metabolic burden to the cells as evidenced by retarded cell growth in the defined medium. Recombinant E. coli strains harboring plasmids which carry the tktA gene showed a tendency to segregate their plasmids almost completely within 24h.

• Wind and Structures
• /
• v.26 no.1
• /
• pp.1-9
• /
• 2018

This research studies the dynamic analysis of a concrete column reinforced with titanium dioxide ($TiO_2$) nanoparticles under earthquake load. The effect of nanoparticles accumulation in a region of concrete column is examined using Mori-Tanaka model. The structure is simulated mathematically based on the theory of sinusoidal shear deformation theory (SSDT). By calculating strain-displacement and stress-strain relations, the system energies include potential energy, kinetic energy, and external works are derived. Then, using the Hamilton's principle, the governing equations for the structure are extracted. Using these equations, the response of the concrete column under earthquake load is investigated using the numerical methods of differential quadrature (DQ) and Newark. The purpose of this study is to study the effects of percentage of nanoparticles, nanoparticles agglomeration, geometric parameters and boundary conditions on the dynamic response of the structure. The results indicate that by increasing the volume percent of $TiO_2$ nanoparticles, the maximum dynamic deflection of the structure decreases.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.511-517
• /
• 2005

Fretting fatigue is often the root cause of the nucleation of cracks at attachments of structural components. Since fretting fatigue damage accumulation occurs over relatively small volumes, the subsurface cyclic plastic strain is expected to be rather non-uniformly distributed in polycrystalline materials. The scale of the cyclic plasticity and the damage process zones is often on the order of microstructure dimensions. Fretting damage analyses using cyclic crystal plasticity constitutive models have the potential to account for the influence of size, morphology, and crystallographic orientation of grains on fretting damage evolution. Two-dimensional plane strain simulations of fretting fatigue are performed using the cyclic properties of Ti-6Al-4V. The crystal plasticity simulations are compared to an initially isotropic $J_{2}$ theory with nonlinear kinematic hardening as well as to experiments. The influence of initially isotropic versus textured microstructure in the presence of crystallographic slip is studied.

• Korean Journal Plant Pathology
• /
• v.14 no.6
• /
• pp.606-611
• /
• 1998

An antagonistic bacterium, Pseudomonas flurorescens MC07 inhibited the mycelial growth of Rhizoctonia solani, Pythium ultimum, Fusarium oxysporum, and Phytophthora capsici in on potato dextrose agan (PDA) and other media. The strain MC07 conlonizes various plant roots and possesses antifungal activity. To determine the role of antifungal activity of the bacterium in disease suppression, a mutant Okm3-4 which lost its activity was isolated after screening 2,500 colonies generated by Omegon-Km insertions. The mutant Okm3-4 showed diminished growth inhibition of R. solani, P. ultimum, F. oxysporum, and Ph. capsici in vitro and had reduced suppressive effects on sesame damping.-off compared to the parental strain. In soils, accumulation of the pathogens by continuous cropping, 90% of sesame plants were killed by natural infection of damping-off whereas, only 29% of plants grown from seeds treated with MC07 were killed. On the other hand, 85% of plants died when sesame seeds were treated with the Okm3-4 cells. This indicated that antifungal activity of MC07 in vitro is directly responsible for the suppression of damping-off disease. Emergence rates of sesame seeds in pots containing diseased soil were 33%. However, MC07 treatments on seeds significantly improved emergence rates, which has similar effects of Benomyl treatment. The mutant Okm3-4 exhibited 53% of emergence rate. This indicated that antifungal activity of MC07 also affects the emergence rate of sesame seeds.