• Korean Journal of Microbiology
• /
• v.53 no.4
• /
• pp.320-322
• /
• 2017

A betaproteobacterium strain GR16-43 was isolated from a surface layer of the Geomnyong Pond in Republic of Korea by a dilution-to-extinction culturing method. We report the whole genome sequence of the strain GR16-43, which contains 4,806,848 bp with a G + C content 67.12%, and to include 4,424 protein-coding genes and 47 transfer RNA genes. The genome was determined to contain the genes encoding carbon monoxide dehydrogenase, nitrate reductase, nitrite reductase, nitric oxide reductase, and the sulfur oxidation (sox) gene cluster, highlighting the potential importance of the bacterial group represented by the strain in the cycling of inorganic elements. These results indicate that strain GR16-43 genome showed several traits indicating adaptation of the bacteria to living in freshwater environments.

• Journal of Korea Foundry Society
• /
• v.11 no.4
• /
• pp.331-337
• /
• 1991

Various test specimens were prepared by austempering low alloyed Mo-Ni-Cu ductile iron blocks of high graphite nodule count at 270, 320 or $370^{\circ}C$ for 0.5, 1, 3 or 9hrs. Tensile test, CVN impact test and plane-strain fracture toughness test(compact tension specimen of 50mm W) were done for each heat treatment condition at room temperature. X-ray diffractometer and optical microscope were used to investigate the change of microstructure and relationships between microstructure and test results. The highest retained austenite volume percent at each austempering temperature was corresponded to the highest mechanical property. The highest elongation value of 17%, U.T.S. value of 1,600 MPa or $K_{IC}$ value of 90MPa${\surd}$m were reached at each optimum condition. The best heat treatment condition for fracture toughness were 3hrs' holding time combined with the austempering temperature of 270 and $320^{\circ}C$, and 1hr's of $370^{\circ}C$.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2901-2909
• /
• 2020

Thermal creep is a key property of zircaloy cladding. CZ developed by CGN is a new zircaloy used as PWR fuel cladding. This research is devoted to investigating the thermal creep behavior of CZ and build the thermal creep model of CZ. Twenty internal pressure creep tests were conducted, and the ranges of temperature and Tresca stress were 320-430 ℃ and 70-300 MPa, respectively. Real-time creep data were analyzed by separating primary creep and steady-state creep. Based on Soderberg model and creep test data, CZ thermal creep model is derived. As a whole, the mean value and the standard deviation of P/M of CZ saturated primary creep strain are very close to these from steady-state creep rate, however, the predictive effect of primary creep is less satisfactory. Four conditions, where there exists large deviation between predicted values and test data, are 320 ℃ and 300 MPa, 350 ℃ and 190 MPa, 380 ℃ and 160 MPa, 380 ℃ and 190 MPa, respectively. As primary creep was much smaller than steady-state creep in long-time operation, the thermal creep model built can be applied to predict the thermal creep behavior of CZ cladding.

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.320-324
• /
• 2010

Five different enrichment methods were studied to find an optimal method to recover Yersinia enterocolitica from swine feed samples. When the recovery of Y. enterocolitica GER-C (serotype O:3) strain was studied at 1000 CFU/g feed, phosphate-buffered saline (PBS) enrichment at $4^{\circ}C$ and PBS plus sorbitol and bile salts (PSB) enrichment at $4^{\circ}C$ and $21^{\circ}C$ were not effective (< 22%). In contrast, both irgasan-ticarcillin-potassium chlorate (ITC) and tryptic soy broth plus polymyxin B sulfate and novobiocin (TSBPN) enrichment methods showed a full recovery (100%) at 100-1000 CFU/g feed. At 10 CFU/g feed, both ITC and TSBPN methods still recovered the strain (> 50%). In recovery of ATCC 9610 (serotype O:8) strain, TSBPN method was more sensitive than any other methods (P < 0.05) at 1000 CFU/g feed. Using TSBPN method, the strain was still recovered at 100 CFU/g feed, but not at 10 CFU/g feed. With its sensitivity and relatively simple recipe, TSBPN was most desirable method to recover Y. enterocolitica from swine feed samples.

• Tunnel and Underground Space
• /
• v.21 no.4
• /
• pp.320-327
• /
• 2011

In this study, for stemming effect in blast of the mortar block body, the crushed granite sand as fine aggregate, which is waste rock obtained at the ○○ limestone mine, was investigated to compare with stemming materials such as sea sand, river sand, clayed soil and water can be acquired easily at the field. The mortar block body was manufactured with the dimensions of 50 cm width, 50 cm length and 70 cm height. The direct shear and sieve separator test were performed, and the properties of friction resistance were analyzed by the extrusion test for five stemming materials. Axial strain of steel bar and ejection velocity of stemming materials due to the explosive shock pressure in blasthole with the stemming length of 10 cm and 20 cm in the mortar blast test were measured by the dynamic data acquisition system. Among stemming materials, axial strain showed the largest value at the crushed granite sand as fine aggregate, and the ejection velocity was the smallest value at the stemming of water. The results has shown correlate with harden unit weight in blasthole, particle size distribution, shear resistance, and extrusion strength of stemming materials. The ejection velocity of stemming material at the mouth of blasthole and the axial strain of steel bar in the inside of blasthole tend to be inversely proportional to each other, represent exponentially.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.131-138
• /
• 2008

Humidity and strain were estimated for understanding the relation between humidity change by self-desiccation and shrinkage in high-performance concrete with low water binder ratio. Internal humidity change and shrinkage strain were about 10%, 4% and $320\times10^{-6}$, $120\times10^{-6}$ respectively on concrete with water binder ratio 0.3, 0.4 and from the results, humidity change and shrinkage represented the strong linear relation regardless of mixture. For specifying the relation on internal humidity change and autogenous shrinkage strain, shrinkage model was established which is driven by capillary pressure in pore water and surface energy in hydrates on the assumption of a single network and extended meniscus in pore system of concrete. This model and experimental results had a similar tendency so it would be concluded that the internal humidity change by self-desiccation in HPC originated in small pores less than 20 nm, therefore controlling plan on autogenous shrinkage might be focused on surface tension of water and degree of saturation in small pore.

• KSBB Journal
• /
• v.17 no.3
• /
• pp.317-320
• /
• 2002

A bacterium(Y-5) which has potent antibacterial activity against swine atrophic rhinitis bacteria (Bordetella bronchiseptica, Pasteurella multocida) was isolated from soil and identified as a strain of Bacillus sp. Y-5 upon investigation of the morphological and physiological characteristics. The culture broth obtained from incubation of the Y-5 strain at $30^{\circ}C$ for 21 h in tryptose-bouillon agar medium (pH 6.0) showed active antibacterial activity against Bordetella bronchiseptica and the culture broth that of $30^{\circ}C$, pH 6.5, 18 h showed active antibacterial activity against Pasteurella multocida.

• Structural Engineering and Mechanics
• /
• v.43 no.3
• /
• pp.311-320
• /
• 2012

The higher-order asymptotic C(t) - $A_2(t)$ approach was employed to investigate the crack-tip stress of two collinear cracks in a power-law creeping material under the plane strain conditions. A comprehensive calculation was made of the single crack, collinear crack model with S/a = 0.4 and 0.8, by using the C(t) - $A_2(t)$ approach, HRR-type field and the finite element analysis; the latter two methods were used to check the constraint significance and the calculation accuracy of the C(t) - $A_2(t)$ approach, respectively. With increasing the creep time, the constraint $A_2$ was exponentially increased in the small-scale creep stage, while no discernible dependency of the constraint $A_2$ on the creep time was found at the extensive creep state. In addition, the creep time and the mechanical loads have no distinct influence on accuracy of the results obtained from the higher-order asymptotic C(t) - $A_2(t)$ approach. In comparison with the HRR-type field, the higher-order asymptotic C(t) - $A_2(t)$ solution matches well with the finite element results for the collinear crack model.

• Microbiology and Biotechnology Letters
• /
• v.25 no.5
• /
• pp.483-489
• /
• 1997

Sulforhodamine B (SRB) and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay, RNA dot blot and Northern hybridization analysis were performed to screen microorganisms for the production of anticancer agent. Among microorganisms tested, strain YP-1 was selected for its cytotoxicity and ability to reduce the level of c-myc RNA. Strain YP-1 was identified as Streptomyces endus. The anticancer material produced by Streptomyces endus YP-1 was sequentially purified by solvent extraction, silica gel column chromatograpby, preparative TLC and preparative HPLC. The cancer material identified as azalomycin B by the instrumental analyses such as $^{1}$H-NMR, $^{13}$C-NMR, Mass, IR and UV absorption. It was colorless amorphous powder and its molecular weight was 1025.278. Azalomycin B, produced by Streptomyces endus YP-1, showed anticancer activity against several human cancer cell lines and reduction of c-Myc protein level in Colo320 DM cells which was determined by Western blot analysis.

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.2
• /
• pp.21-25
• /
• 2020

We investigated the flux pinning property of GdBa₂Cu₃O_7-x (GdBCO) films on top of La_0.7Sr_0.3MnO₃ (LSMO) nanoparticles deposited by a surface decoration. Both GdBCO films and LSMO nano particles were deposited by pulsed laser deposition and the number of laser pulses were varied from 80 to 320 in order to control the density of the LSMO nanoparticles. The magnetization data at 77 K showed that the critical current density (J_c) was enhanced in all of the GdBCO films with LSMO nanoparticles and that the J_c enhancement was found to be inversely proportional to the LSMO nanoparticle density. Structural analyses revealed that LSMO nanoparticles induce a compressive strain in the GdBCO films resulting in a disordering in the CuO₂ plane. Therefore, the enhanced flux pinning property in the GdBCO with LSMO nanoparticles was attributed to the competing effect between the increase of pinning centers and the increase of compressive strain in the superconducting phase.