• Architectural research
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2007

These days the copyright plays a significant role in various fields of creative works and it has expanded dramatically into unprecedented ways. In Korea, architectural works copyright cases are rare due to the lack of information and understanding of the architectural works copyright. Architectural works copyright can promote architects' creative activities and enhance the quality of architectural works as art. Nevertheless, there is little effort to advance the studies of architectural works copyright in the architectural design area. Under these circumstances, this research attempts to share the basic case laws and remedies for various architectural works copyright issues in the U.S. cases. This Article examines the Thomas Shine v. David M. Childs and Skidmore Owings & Merrill, LLP Case which is the most recent case as I could reach. This case is about a story between two architects, one is from a very prestigious architectural design firm and the other, once Yale Architectural student, now practices his design work as an up-and-coming architect. A close examination of this case will provide a legal and architectural spectrum of copyright. That is, it will make it more specific how to solve the copyright infringement. Artistic and technological contexts are overlapped in Architectural works copyright as its inherent characteristics. Therefore, different ways from other copyrighted works are needed to access the untangled equations of the architectural works copyright protection. In addition, more comprehensible and specific regulations that can impose a remedy more suited to the architectural works copyright violations are needed and they should enable architects to fulfill their architectural activities under wide range of copyright protection. Moreover, in prior to all efforts to handle those equations, fundamental knowledge of architectural works copyright is required to improve the copyright protection in the architectural design area as well as to provide for the globalizing design practice. Ultimately, all of these efforts will be rewarded when constant researches based on Korean and other countries' architectural copyright cases can support them and it would be great if this research can set the stage for resolving expected copyright conflicts within the architectural design area.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.49-57
• /
• 2019

Recently, the use of deep deck plate has been increased in various structures, such as underground parking lots, logistics warehouses, because it can reduce construction periods and labor costs. In this study, a newly developed Double Deck (D-deck) plate which can leads to save story heights has been introduced, and experimental tests on a total of five D-deck plates under construction loads have been carried out to investigate their structural performance at construction stage. The loads were applied by sands and concrete to simulate the actual distributed loading conditions, and the vertical deflection of D-Deck and the horizontal deformation of web were measured and analyzed in detail. As a result, it was confirmed that all the D-decks showed very small vertical deflection of less than 5.34 mm under construction loads, which satisfies the maximum deflection limit of L / 180. In addition, the D-Deck plate was found to have a sufficient rigidity to resist construction loads in a stable manner.

• Smart Structures and Systems
• /
• v.21 no.4
• /
• pp.479-491
• /
• 2018

Shape memory alloys (SMA) exhibit superelasticity which refers to the capability of entirely recovering large deformation upon removal of applied forces and dissipating input energy during the cyclic loading reversals when the environment is above the austenite finish temperature. This property is increasingly favored by the earthquake engineering community, which is currently developing resilient structures with prompt recovery and affordable repair cost after earthquakes. Compared with the other SMAs, NiTi SMAs are widely deemed as the most promising candidate in earthquake engineering. This paper contributes to evaluate the seismic performance of properly designed concentrically braced frames (CBFs) equipped with NiTi SMA braces under earthquake ground motions corresponding to frequently-occurred, design-basis and maximum-considered earthquakes. An ad hoc seismic design approach that was previously developed for structures with idealized SMAs was introduced to size the building members, by explicitly considering the strain hardening characteristics of NiTi SMA particularly. The design procedure was conducted to compliant with a suite of ground motions associated with the hazard level of design-basis earthquake. A total of four six-story CBFs were designed by setting different ductility demands for SMA braces while designating with a same interstory drift target for the structural systems. The analytical results show that all the designed frames successfully met the prescribed seismic performance objectives, including targeted maximum interstory drift, uniform deformation demand over building height, eliminated residual deformation, controlled floor acceleration, and slight damage in the main frame. In addition, this study indicates that the strain hardening behavior does not necessarily impose undesirable impact on the global seismic performance of CBFs with SMA braces.

• Journal of Environmental Science International
• /
• v.24 no.10
• /
• pp.1273-1283
• /
• 2015

In present study, the temporal characteristics of nine selected volatile organic compounds (VOCs), including four alcohol, 2 aldehyde, and 3 ketone compounds, in high-stories urban apartments over a 2-y period were investigated. The indoor VOC concentrations had generally a decreasing trend over the 2-y follow-up period. For examples, the 2E1H indoor concentration decreased from $10.8{\mu}g/m^3$ for the first two months to $5.1{\mu}g/m^3$ for the last two months. In addition, the DCA and ACT indoor concentrations decreased from 5.0 and $14{\mu}g/m^3$ for the first two months to 2.2 and $6.4{\mu}g/m^3$, respectively, for the last two months. The indoor-to outdoor concentration ratios over the 2-y period were much greater than 1, indicating that indoor VOC concentrations were higher than the outdoor VOC concentrations. Similar to those of the individual VOCs, the indoor-to-outdoor concentration ratios of all three VOC groups were higher than 1 over the 2-y follow-up period, suggesting higher indoor concentrations of the three VOC groups than outdoor concentrations. In consistence with the results of VOC indoor concentrations, the VOC emission rates decreased gradually as time passed, due to the decreased VOC emission strengths of indoor sources. Finally, there was an initial sharp decrease in the indoor VOC concentrations followed by a slower decrease, indicating a multi-exponential decay model for the target VOCs, which was demonstrated by comparison of the residuals and the adjusted coefficient of determination associated with the one and two-exponential fits of each data set.

• International Journal of High-Rise Buildings
• /
• v.4 no.1
• /
• pp.9-25
• /
• 2015

Field measurements of various structures have been conducted for many purposes. Measurement data obtained by field measurement is very useful to determine vibration characteristics including dynamic characteristics such as the damping ratio, natural frequency, and mode shape of a structure. In addition, results of field measurements and modal identification can be used for modal updating of FEM analysis, for checking the efficiency of damping devices and so on. This paper shows some examples of field measurements and modal identification for structural health monitoring. As the first example, changes of dynamic characteristics of a 15-story office building in four construction stages from the foundation stage to completion are described. The dynamic characteristics of each construction stage were modeled as accurately as possible by FEM, and the stiffness of the main structural frame was evaluated and the FEM results were compared with measurements performed on non-load-bearing elements. Simple FEM modal updating was also applied. As the next example, full-scale measurements were also carried out on a high-rise chimney, and the efficiency of the tuned mass damper was investigated by using two kinds of modal identification techniques. Good correspondence was shown with vibration characteristics obtained by the 2DOF-RD technique and the Frequency Domain Decomposition method. As the last example, the wind-induced response using RTK-GPS and the feasibility of hybrid use of FEM analysis and RTK-GPS for confirming the integrity of structures during strong typhoons were shown. The member stresses obtained by hybrid use of FEM analysis and RTK-GPS were close to the member stresses measured by strain gauges.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.5
• /
• pp.573-582
• /
• 2006

The game is in progress according to the game story with the text, graphic, animation, motion picture, music, etc. Also the result of the game varies depending on the strategy and tactics of the player. For the development of the game, this paper describes the task of the game planner, game programmer, and game graphic designer. Game graphic designers are classified into 4 parts such as the art director, original picture designer, 2D designer, and 3D designer. Among these, the 3D designer makes the 3D game characters with the use of 3D tools. This paper presents the method that 3D designers and beginners can develop 3D characters easily and quickly, Also, this paper shows the method for making preparations of SourceModel which includes 150 polygons. The SourceModel is made up of between five life size and eight life size. In addition, Character Primitives Interface is made to use SourceModel in MaxScript. Accordingly 3D designers have the free use of SourceModel and they will be able to save time.

• Education of Primary School Mathematics
• /
• v.17 no.3
• /
• pp.173-188
• /
• 2014

The aim of the case study presented in this paper was to explore mathematics curriculum knowledge of a South Korean elementary teacher. An in-depth case study is applied to examine mathematics curriculum knowledge that influences teachers' instructional process including analysis of diverse artifacts such as lesson plan, observation and interviews. Findings of this study suggest that mathematics curriculum knowledge has direct relevance to teaching a lesson, designing a lesson and assessing students' work. In addition, this study identified that mathematics curriculum knowledge may be divided into two sub-categories: vertical mathematics curriculum knowledge and horizontal mathematics curriculum knowledge. The results of this case study help our understanding of South Korean elementary teachers' mathematics curriculum knowledge, which has a deep impact on their teaching practice. Moreover, this cross-national research offers implications for researchers, policymakers, and teachers in U.S. as well as those in South Korea.

• Education of Primary School Mathematics
• /
• v.17 no.3
• /
• pp.205-230
• /
• 2014

New teaching and learning theory on various aspects about class is needed to implement education which reflects constructivism, ideally. For an ideal learner-centered mathematics class, tangible and intangible elements related to education(view of knowledge, view of leaner, teacher's role, evaluation, the form of class, learning, teaching material, etc.) should be integrated from a constructive perspective and especially, teaching material has to be premised on that learners have intellectual abilities to construct knowledge themselves, and reflect integrity of knowledge, diversity and others, and contain open attributes. In addition to this, teaching material should have characteristics different from those when objective epistemology applies, so there is a need to analyze whether teaching material has those characteristics. For this, this study compared and analyzed <1. Three-Digit Numbers> which belongs to the domain of numbers and operations out of the units of mathematics(3) textbook of the 2009 revised curriculum for the first and second grade that first introduced story-telling, and <3. Understanding of Place Values> for the second grade of constructive math class used in the U.S.

• Journal of the Korean Society of Food Culture
• /
• v.26 no.4
• /
• pp.374-382
• /
• 2011

The origin of Korean traditional food's spicy taste dates back to the first telling of the Dangun myth-a story of a tiger and bear who tried to reincarnate themselves in human form by eating garlic and wormwood. For a long time, Koreans have eaten spicy vegetables such as green onion, garlic, ginger, mustard, leeks, corni, cinnamon bark, and Chinese peppers (Zanthoxylum schinfolium) and Zanthoxylum bungeanum. In prehistoric times, spicy vegetables were probably used to eliminate the smell of meat. In the agricultural age, they were used to supplement meals with fresh taste. They were also used as a substitute for salt (salt was very precious and expensive) as well as side dishes for the poor. Spicy vegetables have also been used as a substitute for main dish like medicinal gruel and used to increase the spiciness of soup, and they are usually used as a side dish and with condiments in namul (cooked vegetable dishes), sangchae (salad), ssam (wrapped in greens and garnished with red-pepper paste or other condiments) and Kimchi. In addition, chili pepper was introduced to the Korean Peninsula in the middle of the Joseon Dynasty (mid-15th, 16th century). The soil and climate of the Korean Peninsula are suitable to growing chili pepper, and chili pepper has excellent adaptability and productivity. Accordingly, it is processed to red pepper powder and has become a major part of traditional Korean food along with Chinese pepper. Since the Joseon Dynasty, many kinds of Kimchi made with red pepper powder have been developed, and most Koreans enjoy them these days. The main characteristics of Korean food are spiciness and honest-to-goodness taste.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.29-38
• /
• 2009

In Korea, large.scale housing complexes and residential areas began to appear in urban regions through urban plan projects from the 1970s. In addition, with the increase in the percentage of apartments in developed areas, road traffic noise at roadside apartments was raised as a new problem. Furthermore, since the late 1980s, apartments, which had been no taller than 15 stories, have grown higher to 20-30 stories and recently 40.story or higher apartments are being constructed, and as a result, residences are growing denser and road traffic noise is increasing in urban areas. Thus, the present study made a noise map using variables 'traffic volume' and 'mean spot speed' among factors influencing roadside apartments, and examined the noise reduction efficiency of the variables. According to the results, traffic volume and speed limit were found to have an effect on a limited space, and the median bus lane system was found to have a slight effect on the roadside.