• Progress in Superconductivity and Cryogenics
• /
• v.16 no.1
• /
• pp.36-41
• /
• 2014

Since glass microsphere has high crush strength, low density and small particle size, it becomes alternative thermal insulation material for cryogenic systems, such as storage and transportation tank for cryogenic fluids. Although many experiments have been performed to verify the effective thermal conductivity of microsphere, prediction by calculation is still inaccurate due to the complicated geometries, including wide range of powder diameter distribution and different pore sizes. The accurate effective thermal conductivity model for microsphere is discussed in this paper. There are four mechanisms which contribute to the heat transfer of the evacuated powder: gaseous conduction ($k_g$), solid conduction ($k_s$), radiation ($k_r$) and thermal contact ($k_c$). Among these components, $k_g$ and $k_s$ were calculated by Zehner and Schlunder model (1970). Other component values for $k_c$ and $k_r$, which were obtained from experimental data under high vacuum conditions were added. In this research paper, the geometry of microsphere was simplified as a homogeneous solid sphere. The calculation results were compared with previous experimental data by R. Wawryk (1988), H. S. Kim (2010) and the experiment of this paper to show good agreement within error of 46%, 4.6% and 17 % for each result.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.1-6
• /
• 2008

Block copolymers spontaneously assemble into various nanoscale structures such as spheres, cylinders, and lamellar structures according to the relative volumn ratio of each macromolecular block and their overall molecular weights. The self-assembled structures of block copolymer have been extensively investigated for the applications such as nanocomposites, photonic crystals, nanowires, magnetic-storage media, flash memory devices. However, the naturally formed nanostructures of block copolymers contain a high density of defects such that the practical applications for nanoscale devices have been limited. For the practical application of block copolymer nanostructures, a robust process to direct the assembly of block copolymers in thin film geometry is required to be established. To exploit self-assembly of block copolymer for the nanotechnology, it is indispensible to fabricate defect-free self-assembled nanostructure over an arbitrarily large area.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.1
• /
• pp.161-168
• /
• 2016

It has become the information medium that mediate between individuals of marketing with the new information media that use of the Internet in accordance with the progress of the IT industry- real estate marketing, real estate leasing, real estate auctions, etc. The real estate registration services should be disclosed to outside that include a schedule details the public book-register and problems caused by it should be reasonably resolved by handling a large amount of real estate registration work quickly, accurately handling to utilize Information Technology(IT) through the information system construction as the feature to process the information of register entries. Computerization of real estate registration will raise the efficiency of the registration as well as people can see the information related to real estate on the basis of published content without limitation the time and place and will pursue the ideal and reliability of the registration -web accessibility improving of the Internet Registry and permanent storage of preserving documents by electronic means. It is very large that impact on the real estate transaction if the accuracy of legal registration choosing formalism in the processing of real estate registration business through the Internet than written application is highly probable to occur incorrect registration. Also, It is necessary to manage it effectively -if you do not quickly and exactly respond to it, there is problems such as delays or poor registration service because real estate business activated and real estate registration services also increased sharply. In this paper, we will identify the problems of the real estate registration work and suggest improvements about it.

• Restorative Dentistry and Endodontics
• /
• v.40 no.3
• /
• pp.188-194
• /
• 2015

Objectives: This study evaluated the effect of lactic acid and acetic acid on the microhardness of a silorane-based composite compared to two methacrylate-based composite resins. Materials and Methods: Thirty disc-shaped specimens each were fabricated of Filtek P90, Filtek Z250 and Filtek Z350XT. After measuring of Vickers microhardness, they were randomly divided into 3 subgroups (n = 10) and immersed in lactic acid, acetic acid or distilled water. Microhardness was measured after 48 hr and 7 day of immersion. Data were analyzed using repeated measures ANOVA (p < 0.05). The surfaces of two additional specimens were evaluated using a scanning electron microscope (SEM) before and after immersion. Results: All groups showed a reduction in microhardness after 7 day of immersion (p < 0.001). At baseline and 7 day, the microhardness of Z250 was the greatest, followed by Z350 and P90 (p < 0.001). At 48 hr, the microhardness values of Z250 and Z350 were greater than P90 (p < 0.001 for both), but those of Z250 and Z350 were not significantly different (p = 0.095). Also, the effect of storage media on microhardness was not significant at baseline, but significant at 48 hr and after 7 day (p = 0.001 and p < 0.001, respectively). Lactic acid had the greatest effect. Conclusions: The microhardness of composites decreased after 7 day of immersion. The microhardness of P90 was lower than that of other composites. Lactic acid caused a greater reduction in microhardness compared to other solutions.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.187-193
• /
• 2019

Regarding physical absorption mechanism for fine particles(Dust), internal pore-bridging is a major parameter in porous media. In this paper, internal bridging pore system is invented through FA-based geopolymer and incorporated PLA (Polylactic Acid) fiber with biodegradability. With various mix proportions, compressive strength over 20MPa is obtained but PLA is little dissolved in the condition of NaOH 5mole and $30^{\circ}C$ of temperature, which was found that temperature rising accelerates PLA solubility. Within 24hours, beads type PLA is completely dissolved under $90{\sim}130^{\circ}C$ and NaOH 5~12mole of alkali. In room condition, geo-polymerization is limitedly occurs so that the internal pore after PLA dissolution is thought to be effective to absorption and storage of fine particles.

• Journal of Broadcast Engineering
• /
• v.24 no.4
• /
• pp.660-669
• /
• 2019

Recently, with the development of three-dimensional scanning devices and multi-dimensional array cameras, research is continuously conducted on techniques for handling three-dimensional data in application fields such as AR (Augmented Reality) / VR (Virtual Reality) and autonomous traveling. In particular, in the AR / VR field, content that expresses 3D video as point data has appeared, but this requires a larger amount of data than conventional 2D images. Therefore, in order to serve 3D point cloud content to users, various technological developments such as highly efficient encoding / decoding and storage, transfer, etc. are required. In this paper, V-PCC bit stream created using V-PCC encoder proposed in MPEG-I (MPEG-Immersive) V-PCC (Video based Point Cloud Compression) group, It is defined by the MPEG-DASH (Dynamic Adaptive Streaming over HTTP) standard, and provides to be composed of segments. Also, in order to provide the user with the information of the 3D coordinate system, the depth information parameter of the signaling message is additionally defined. Then, we design a verification platform to verify the technology proposed in this paper, and confirm it in terms of the algorithm of the proposed technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1544-1553
• /
• 2018

Recently internal information leakage in industries is severely increasing in spite of industry security policy. Thus, it is essential to prepare an information leakage prevention measure by industries. Most of the leaks result from the insiders, not from external attacks. In this paper, a real-time internal information leakage prevention system via both storage and network is implemented in order to protect confidential file leakage. In addition, a Hadoop-based user behavior analysis and statistics system is designed and implemented for storing and analyzing information log data in industries. The proposed system stores a large volume of data in HDFS and improves data processing capability using RHive, consequently helps the administrator recognize and prepare the confidential file leak trials. The implemented audit system would be contributed to reducing the damage caused by leakage of confidential files inside of the industries via both portable data media and networks.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.323-330
• /
• 2019

Recently, as the growth of the Internet has led to a rapid increase in the consumption of multimedia such as photographs and moving images, the importance of metadata has been emphasized. In the case of existing metadata, only limited information such as GPS value or focal length according to the format is stored. However, with the development of mobile devices and multimedia acquisition devices, various sensors can be used in the devices. Therefore, this paper describes a method that can store not only the existing metadata format information at the time of multimedia acquisition but also another existing format of metadata such as information of various sensors which is the gyroscope and acceleration sensor of the device. We propose an application program that provides moving location information. The proposed method is expected to provide various applications such as image matching and effective image classification.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.12
• /
• pp.13-20
• /
• 2018

This research is to analyze the public cases of information facilities in terms of central circulations in multi level volumes such as atrium or court which provide visual intervention between different spaces and physical connections such as bridges. Hunt Library design balances the understood pre-existing needs with the University's emerging needs to create a forward-thinking learning environment. While clearly a contemporary structure within a traditional context of the NCSU campus, the Hunt Library provides a positive platform for influencing its surroundings. Both technical and programmatic innovations are celebrated as part of the learning experience and provide a versatile and stimulating environment for students. Public library as open spaces connecting to an interactive social domain over communities can provide variety of learning environments, or technology based labs. There are many cases of the public information spaces with dynamic networks where participants can play their roles in physical space as well as in the intellectual stimulation. In the research, new public projects provide typologies of information spaces with user oriented media. The research is to address a creative transition between the reading space and the experimental links of the integration of state-of-the-art technology is highly visible in the building's design. The user-friendly browsing system that replaces the traditional browsing with the virtual shelves classified and archived by their form, is to reduce the storage space of the public library and it is to allow more space for collaborative learning. In addition to the intelligent robot of information storages, innovative features is the large-scale visualization space that supports team experiments to carry out collaborative online works and therefore the public library's various programs is to provide visitors with more efficient participatory environment.

• Safety and Health at Work
• /
• v.13 no.1
• /
• pp.23-31
• /
• 2022

Background: Potato is the main crop of Ardabil Plain (accounting for one-fifth of potato production in Iran). Its health hazard risk to farmers is rising due to the increasing rate of pesticide use. The present study analyzes potato farmers' health hazard risk in the use of chemical pesticides. Methods: The rate of pesticide use by farmers (n = 370) was first compared with the recommended dosage (on pesticide label). Then, a composite index was employed to estimate the health hazard risk of farmers during pesticide use, and the variables accounting for pesticide overuse and nonoveruse were analyzed. Safety behavior was examined in four steps, namely of pesticide purchase and storage, preparation, application, and postapplication. Results: It was found that 74.6 percent of potato farmers used pesticides in higher concentrations than the recommended dosage. The higher average rate of pesticide use versus recommendation (label instruction) was related to Chlorpyrifos and Trifluralin, and the highest average health hazard risk among farmers was related to the use of Chlorpyrifos and Metribuzin. Farmers with a higher risk of health hazard displayed much lower safety behavior than the other farmers at all steps of pesticide use. Conclusion: The most important variables discriminating the health hazard risk of farmers' overuse included health behavior identity, attitude, knowledge and awareness, and cues to action. Therefore, using social media, holding local exhibitions, and engaging local leaders and skilled farmers in the region to improve farmers' attitudes and health behavior identity toward the dangers of chemical pesticides can play a significant role in motivating farmers' display of overuse preventive behaviors.