• 제목/요약/키워드: stop test

검색결과 412건 처리시간 0.03초

항공기 착륙거리의 여유분 산정에 관한 연구 (A Study on the Allowances of Aircraft Landing Distance)

  • 노건수;김웅이
    • 한국항행학회논문지
    • /
    • 제17권3호
    • /
    • pp.279-284
    • /
    • 2013
  • 운항의 여러 단계 중 착륙단계에서 조종사들이 많은 부담을 느낀다. 이는 조종사들이 항공기 속도를 줄이고 접지하여 완전히 정지하는 동안 착륙안전에 영향을 미치는 여러 요소가 있기 때문이다. 만일 착륙하는데 활주로길이가 충분하다면 부담이 적을 수도 있다. 그러나 항상 그런 경우만 있는 것은 아니다. 따라서 착륙성능이 제한범위 내에 있는지 아닌지를 확인할 필요가 있다. 필요착륙거리는 시험비행 조종사에 의해 실증되어진 실제착륙거리에다가 항공사의 평균적인 조종사들을 위한 여유분을 포함한 것이다. FAR의 AFM(항공기 비행규정) 인가는 건조 및 습윤 활주로에서 수동착륙을 기반으로 한다. 기타 다른 활주로 조건에서는 인가가 필요하지 않다. JAR에서는 빙설/윤활활주로에서도 정해진 여유분을 포함시키도록 규정하고 있다. 자동착륙은 인가사항이 아니므로 실제착륙거리만 제공된다. 본 논문에서는 각 활주로 조건에서 포함된 거리 여유분을 분석하고자 한다. 또한 특정한 활주로 조건에서 여유분이 규정되어 있지 않은 경우 대안을 제시하고자 한다.

G91강 저주파 피로균열 성장에 미치는 온도와 응력비의 영향 (Effects of Temperature and Stress Ratio on Low-Cycle Fatigue Crack Growth of G91 Steel)

  • 김종범;황수경;김범준;이종훈;박창규;이형연;김문기;임병수
    • 대한금속재료학회지
    • /
    • 제50권4호
    • /
    • pp.271-279
    • /
    • 2012
  • 9-12% Cr steels have been used in thermal power plants which repeat start and stop operations. Major factors of fatigue life are temperature, frequency, stress ratio, holding time, microstructure, and environment. Normally, fatigue life decreases at high temperature, low frequency, high stress ratio, and long holding time conditions. A Mod.9Cr-1Mo steel, called G91, was developed at ORNL (Oak Ridge National Laboratory, USA) and was adopted as a high-temperature structural material in the ASME Code in 2004. However, its low-cycle fatigue and fatigue crack growth characteristics have been rarely studied. In this work, we have investigated the low-cycle fatigue crack growth behaviors of G91 steel under various test conditions in terms of temperature and stress ratio. As temperature and stress ratio increase, the crack growth rate becomes faster and striation distance also increases. On the other hand, the number of branch cracks decreases.

급성통증관리 간호사 주도의 수술 후 통증관리 현황 (Postoperative Pain Management Status led by Nurse of Acute Pain Service)

  • 강미라;류정옥;김명희;윤혜신;권정순
    • 임상간호연구
    • /
    • 제26권3호
    • /
    • pp.296-304
    • /
    • 2020
  • Purpose: This study was conducted to demonstrate objective stability of postoperative pain management status managed by nurse-based, anesthesiologist-supervised Acute Pain Service (APS). Methods: A retrospective descriptive review was conducted with 5,748 patients who had used intravenous Patient Controlled Analgesia (PCA) from January to December 2017. Data were analyzed using descriptive statics, Frequency analysis, ANOVA, Cross tabulation with χ2test, and Correlation coefficient. Results: As the APS nurse's education date increased, the period of using PCA was statistically significantly longer, and the period of stopping PCA while using it became shorter (p<.001). Statistically significant, the most painful operations were extremities, spine, upper abdomen, and thorax, while the least painful surgery was lower abdomen (p<.001). Lower abdominal surgery used the highest amount of PCA (p<.001), and extremities and spinal surgery, the lowest amount of PCA and frequently stop using it (p<.001). The most common side effects were nausea and vomiting after surgery, with an incidence of 16.0% within 24 hours and 9.8% within 48 hours. The overall error caused by PCA was 1.5%, with 84.3% being caused by human errors. Conclusion: With the pain management effect of APS nurses, patients used PCA more effectively. There were also fewer side effects and error rates compared to prior studies. Therefore, it is suggested that this system is safe and effective for pain management.

소형 전기차 적용을 위한 AC/DC 복합 V2X 시스템 설계 (Design of AC/DC Combined V2X System for Small Electric Vehicle)

  • 김영중;장영학;문채주
    • 한국전자통신학회논문지
    • /
    • 제17권4호
    • /
    • pp.617-624
    • /
    • 2022
  • V2X를 탑재한 소형 전기운송차는 기존 자동차의 운전시스템에 더 많은 정보와 기능을 제공할 수 있다. V2X 기술의 주요 요소는 V2V(자동차 대 자동차), V2N(자동차 대 네트워크), V2I(자동차 대 인프라) 등이 있다. 본 연구는 외부장비와 연계되는 VI형 E-PTO를 설계하고 구현하는 것으로 E-PTO는 DC/DC 변환기, DC/AC 변환기, 배터리 양방향 충전시스템 등으로 구성된다. 또한 구동을 위한 기기와 제어시스템을 구현하였다. 기동/정지 및 정상상태 운전 통한 VI형 E-PTO 구성부품에 대한 시험결과는 100ms 이내 회복시간과 순간 전압변동율 10%의 허용 가능한 요건을 충족하였다.

초등학생의 비만도 및 식행동과 성격특성과의 관련 연구 (Relationships among Obesity, Food Behavior, and Personality Traits in Elementary School Children)

  • 최경미;나지혜;이은희;천종희
    • 한국식생활문화학회지
    • /
    • 제23권4호
    • /
    • pp.529-537
    • /
    • 2008
  • In this study, the relationships among obesity, food behavior, and personality traits were studied in male and female elementary school children. The obesity rates were calculated via the measured heights and weights of the subjects. Food behavior was surveyed via a questionnaire. Personality traits were evaluated using an authorized personality test. The obesity rates in the child subjects in this study were 34.1%in the male children, and 28.7% in the female children, and the rates of underweight were 18.2% in the males and 28.7% in the females. The percentage of obese children was slightly higher in the male population than in the female population. With regard to food behavior, the females evidenced significantly higher points than the males, particularly on the items designated 'slow eating' and 'stop eating upon satiety'. Among the personality traits assessed herein, which included emotional stability, general activity, sociability, masculinity, responsibility, reflectiveness, and superiority, the females evidenced significantly higher sociability scores than the males. The personality traits did not appear to be significantly associated with the obesity rate. However, the obese children scored lowest on all personality traits among the three groups. In terms of the relationship between food behavior and personality traits, children with high stability, sociability, responsibility, and superiority also had significantly higher food behavior scores. These results imply that the maintenance of good food behavior may enhance stability, sociability, responsibility, and superiority in children.

새로운 잡음전력 추정 기법을 적용한 음향학적 반향 및 배경잡음 제거 통합시스템 (A New Unified System of Acoustic Echo and Noise Suppression Incorporating a Novel Noise Power Estimation)

  • 박윤식;장준혁
    • 한국음향학회지
    • /
    • 제28권7호
    • /
    • pp.680-685
    • /
    • 2009
  • 본 논문에서는 주파수 영역에서 음향학적 반향 및 잡음 제거의 통합 시스템을 위한 효과적인 잡음전력 추정 기법을 제안한다. 제안된 방법은 잡음 제거 (NS, noise suppression)가 음향학적 반향 억제 (AES, acoustic echo suppression)의 후처리단으로 결합하여 사용되는 구조에서 발생하는 잡음전력 추정오차를 줄이기 위해 마이크로폰 입력신호의 음성부재확률 (SAP, speech absence probability)을 잡음전력 갱신을 위한 스무딩 (smoothing) 파라미터로 적용한다. 따라서 제안된 기법에서는 반향 억제 후 신호에서 잡음전력 갱신을 위한 SAP를 추출하는 대신 입력신호에 대한 SAP를 NS 알고리즘에 적용함으로서 잡음 제거기가 반향 억제 후 왜곡된 잡음 스펙트럼 구간에서는 잡음전력을 갱신하지 않도록 한다. 제안된 알고리즘은 기존의 방법과 객관적인 실험을 통해 비교 평가한 결과 다양한 배경잡음 환경에서 우수한 성능을 보였다.

지자체 사이버 공간 안전을 위한 금융사기 탐지 텍스트 마이닝 방법 (Financial Fraud Detection using Text Mining Analysis against Municipal Cybercriminality)

  • 최석재;이중원;권오병
    • 지능정보연구
    • /
    • 제23권3호
    • /
    • pp.119-138
    • /
    • 2017
  • 최근 SNS는 개인의 의사소통뿐 아니라 마케팅의 중요한 채널로도 자리매김하고 있다. 그러나 사이버 범죄 역시 정보와 통신 기술의 발달에 따라 진화하여 불법 광고가 SNS에 다량으로 배포되고 있다. 그 결과 개인정보를 빼앗기거나 금전적인 손해가 빈번하게 일어난다. 본 연구에서는 SNS로 전달되는 홍보글인 비정형 데이터를 분석하여 어떤 글이 금융사기(예: 불법 대부업 및 불법 방문판매)와 관련된 글인지를 분석하는 방법론을 제안하였다. 불법 홍보글 학습 데이터를 만드는 과정과, 데이터의 특성을 고려하여 입력 데이터를 구성하는 방안, 그리고 판별 알고리즘의 선택과 추출할 정보 대상의 선정 등이 프레임워크의 주요 구성 요소이다. 본 연구의 방법은 실제로 모 지방자치단체의 금융사기 방지 프로그램의 파일럿 테스트에 활용되었으며, 실제 데이터를 가지고 분석한 결과 금융사기 글을 판정하는 정확도가 사람들에 의하여 판정하는 것이나 키워드 추출법(Term Frequency), MLE 등에 비하여 월등함을 검증하였다.

MRI 영상획득 중의 피험자 움직임 감지 및 알림 시스템 (Head Motion Detection and Alarm System during MRI scanning)

  • 배종원;박해정;김대진
    • Investigative Magnetic Resonance Imaging
    • /
    • 제16권1호
    • /
    • pp.55-66
    • /
    • 2012
  • 목적 : 자기공명영상(MRI) 획득시 피험자의 머리 움직임은 영상의 품질에 영향을 줄 수 있다. 영상 왜곡의 발생 원인이 되는 피험자의 움직임을 감지하기 위한 3차원 광학 추적 시스템을 제작하였다. 대상 및 방법 : 시스템은 두 대의 CCD 카메라 및 적외선 조명, 구형 반사 마커, 프레임 그래버(frame grabber)와 데스크탑 컴퓨터로 구성되었다. 두 대의 카메라를 이용하여 마커의 움직임을 관측하는 스테레오 비전 시스템을 제작하고, 카메라의 내부/외부 매개변수를 측정하는 캘리브레이션(calibration)과 측정된 매개변수를 이용하여 3차원 움직임 정보를 계산하는 삼각측량(triangulation)기법을 적용하였다. 캘리브레이션 보드와 피험자용 안경을 제작하여 움직임 추적의 정확도와 실제 MRI 영상 촬영 동안의 움직임 검출의 유효성을 평가하였다. 결과 : 반사 마커가 부착된 안경을 쓴 피험자들이 MRI 영상 촬영 동안 머리를 규칙적으로 움직였을 때, 시스템은 MRI의 고자장 환경 내에서도 영상에 영향을 주지 않고 피험자들의 움직임을 잘 감지했다. 결론 : 제작한 스테레오 비전 시스템은피험자의 머리 움직임을 잘 감지하였고, 실시간 알림 기능을 통해 피험자의 움직임을 중지할 수 있도록 알려줌으로써 MRI 영상에 영향을 주는 것을 최소화할 수 있다.

간호사의 간호업무 전산화 활용에 대한 조사연구 (A Survey on Nurses' Utilization of Computerization in Nursing Practice)

  • 이인순
    • 간호행정학회지
    • /
    • 제5권2호
    • /
    • pp.209-224
    • /
    • 1999
  • I have practiced this reserch for the purpose of proposition of basic data for amendment and addition of computer system after I surveyed the degree of abilities and satisfaction on the computerization in nursing\ practice. Subjects were collected from September 1 to September 30, 1998. Study subjects are 151 clinical nurses who are working at university hospital in Chonbuk area. Study instrument consists of 116 questionnaire which was developed by Kim H. K(1998). The data were analized number, mean ,t-test, ANOVA by using SPSS. The study results are as follows: 1. Most of the nurses who answered the questions were educated computerizing(96%). The abilities of computer program utilities were the most in inputting data(74%). The program nurses wanted computerizing education was wordprocess, dealing internet and statistics. 2. As for applying parts of computer system in nursing, the most nurses were Dr's order check (96%), treatment activity(91.4%), medication(89.4%), lab. test(87 .4%), transfering department(85.4%), transfering room(79.5%), diet(71.8%), discharge (70.2%), Barcord Sticker(70.2%) , reservation(62.2%) in order that were all conected order system mutually to other part. It showed that computer system was not applied for treating the original nursing work such as nursing record (13%), duty scheduling(6.0%) , nursing process(4.6%) , Q.I(1.3%), nursing research(1.3%), education(1.3%), 3. As for the benefit when computer system is applied for, the most respondence was promptness of work and convenience(90.6%) , exactness of work (82.8%), offering information exactily and efficiently(36.3%), offering good quality of nursing (6.0%) in order. 4. The degree of contentment on computerizing in nursing practice showed average 3.24%. The best marking item is that they are eager to participate in the computer education. Next, the automatic output of label and giving the number automatically is to prevent loss and mentioned items of patient registration from being changed(3.95) and to prevent mistakes possibly happening because of doctor's difficult order(3.85). 5. The problems which may happen to in nurses' utilization of computerization for the nursing practice showed average 3.18. The most problem is that the practice may stop because of the problem of computer itself(3.67), and the next, the indication of act can be imperfect(3.66) , manual training may overlap because of incomplete computerization (3.60), practical education for the computerizing is lack(3.41), and the computer literate nurses are lack(3.40) . 6. Study subject's contentment by age was significant difference(F=3.10,P=0.0119). Study subject's contentment by job posision was significant difference(F=6.001P=0.0034) I will propose the following according to the above results. The domain of original nursing practice is urgernt. Manual and indication of act should be made before long in computer obstacle. Nursing department should support the nurses so that they could receive the education needed for the nurses themselves.

  • PDF

도축처리 단계별 도체 및 환경재료에 대한 미생물학적 분석 (Bacteriological study on carcasses and environmental specimens from different stage of slaughter process)

  • 허정호;박영호;구정현;조명희;이주홍;임삼규
    • 한국동물위생학회지
    • /
    • 제21권2호
    • /
    • pp.157-161
    • /
    • 1998
  • To get the information of sanitary develoment of beef and pork, we get the result of environmental specimens(slaughter house floors, sewage, etc) in laboratory. 1. After examination of bacterial infection on after-bleeding, after-dismemberment and final products at each stage of cattle slaughter process, we got log 3.80~7.48cfu/$\textrm{cm}^2$ of aerobic plate counts and log 2.60~5.23cfu/$\textrm{cm}^2$ of coliform counts or so from the carcasses after bleeding, but these count levels went down little bit after dismemberment but as we continued study to the final products, the count levels kept sililar in mumbers. 2. At the slaughter process of pigs, the aerobic plate counts and the coliform counts reached such high levels of log 5.59~8.80cfu/$\textrm{cm}^2$ and log 3.31~5.67cfu/$\textrm{cm}^2$, respectively, after bleeding, in general, these count diminished in a big way after scalding, but they increased just little bit from dismemberment to final products. And there were few differences in the contamination levels on the final products no matter what seasonal contaminations after bleeding. 3. Test revealed very low levels of cell counts both on the aerobic plate counts of washing water and in the coliform counts, the former was log 1.00~2.69cfu/$\textrm{cm}^2$ and the later was log 3.30~5.67cfu/$\textrm{cm}^2$, but the contamination levels on the beds of transfering vehicles for carcasses were very high as followes : the aerobic counts was log 4.23~7.20cfu/$\textrm{cm}^2$ and coliform counts was log 2.86~5.20cfu/$\textrm{cm}^2$. 4. Study showed the aeroboc plate counts and the coliform counts get to the highest levels in summer, the second highest one is in fall, the third in spring, lowest in winter. Resulting from the test results proven above we reached this kind of conclusion the bacterial contaminations on eatable carcasses were upto hygienic treatment of carcasses and cleaniness of transfering vehicles at the final stop of slaughter processes rather than upto at any stage of slaughter processes. Therefore we have got to establish alternatives immediately to develo sanitary quality of meat and pork.

  • PDF