• Journal of electromagnetic engineering and science
• /
• v.10 no.1
• /
• pp.39-44
• /
• 2010

In this paper, a compact wideband antenna with a band-notch function is proposed. It operates over the UWB band with a band-stop characteristic. To increase the impedance bandwidth, a ring-shaped radiator is used. By attaching a circular stub to the ring-shaped radiator, the band-notch performance is obtained. The proposed antenna operates over a frequency range from 2.7 GHz to 11 GHz to satisfy the 10-dB return-loss requirement and provides band-stop performance in the frequency band from 5.15 GHz to 6.1 GHz. Experimental results reveal that the proposed antenna exhibits good radiation performance and is suitable for UWB applications.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.5
• /
• pp.223-228
• /
• 2017

SMT is an device that picks up electronic components and does precise placing onto PCBs. In order to do this, it stops in front of a camera installed in the middle to go over vision inspection. And after that it is move for placing. There are 16 different types of routes in this process. This paper compared to the moving time of three methods in the (sLa-Camera-pLa)type. The first method is stopping in front of the camera for vision inspection and placing components onto PCBs(stop-motion). The second method is moving in front of the camera for vision inspection without stopping(fly1-motion). The third method is inspecting the components when the speed of the X axis, the Y axis is the best and is placing components onto PCBs(fly2-motion). This paper shows the moving time of three methods is same. Therefore we proved that the stop-motion method can be placing in the fastest time without changing structure of the device in the (sLa-Camera-pLa)type.

• The Journal of the Korea Contents Association
• /
• v.10 no.8
• /
• pp.95-103
• /
• 2010

Raw files record luminance values corresponds to each pixel of a digital camera sensor. In digital imaging, controlling exposure to capture the first highlight stop is important on linear-distribution of raw file characteristic. This study sought to verify the efficiency of ETTR method and found the optimum over-exposure amount to maintain the first highlight stop to be the largest number of levels. This was achieved by over-exposing a scene with a raw file and converting it to under-exposure in a raw file converting software. Our paper verified the efficiency of ETTR by controlling the exposure range and ISOs. Throughout the results, if exposure increases gradually 6 steps, dynamic range is also increased. And it shows that the optimized exposure value is around + $1\frac{2}{3}$ stop over compared to the normal exposure with the high ISOs simultaneously. We compared visual noise value at $1\frac{2}{3}$ stop to the normal exposure visual noise. Based on the normal exposure's visual noise, we can confirm that visual noise decrement is increased by increasing ISOs. In this experimental result, we confirm that overexposure about + $1\frac{2}{3}$ stop is the optimum value to make the widest dynamic range and lower visual noise in high ISOs. Based on the study results, we can provide the effective ETTR information to consumers and manufacturers. This method will contribute to the optimum image performance in maximizing dynamic range and minimizing noise in a digital imaging.

• Journal of the Korean Institute of Gas
• /
• v.7 no.4 s.21
• /
• pp.44-52
• /
• 2003

In this work dynamic heat transfer in a CPFS (cable penetration fire stop) system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealant. Dynamic heat transfer in the fire stop system is formulated in a parabolic PDE (partial differential equation) subjected to a set of initial and boundary conditions. First, the PDE model is divided into two parts; one corresponding to heat transfer in the axial direction and the other corresponding to heat transfer on the vertical planes. The first PDE is converted to a series of ODEs (ordinary differential equations) at finite discrete axial points for applying the numerical method of SOR (successive over-relaxation) to the problem. The ODEs are solved by using an ODE solver In such manner, the axial heat flux can be calculated at least at the finite discrete points. After that, all the planes are separated into finite elements, where the time and spatial functions are assumed to be of orthogonal collocation state at each element. The initial condition of each finite element can be obtained from the above solution. The heat fluxes on the vertical planes are calculated by the Galerkin FEM (finite element method). The CPFS system was modeled, simulated, and analyzed here. The simulation results were illustrated in three-dimensional graphics. Through simulation, it was shown clearly that the temperature distribution was influenced very much by the number, position, and temperature of the cable stream, and that dynamic heat transfer through the cable stream was one of the most dominant factors, and that the feature of heat conduction could be understood as an unsteady-state process.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.7-12
• /
• 2005

A compact microstrip band-selective filter for ultra-wideband (UWB) radio system is proposed. The filter combines the traditional short-circuited stub highpass filter and coupled resonator bandstop filter on both sides of the mitered 50-ohm microstrip line. To realize the pseudo-highpass filtering characteristic over UWB frequency band (3.1 GHz to 10.6 GHz), a distributed highpass filter scheme is adopted. Three coupled resonators are utilized to obtain the band stop function at the desired frequency band. By meandering the coupled resonators, there is 29% reduction in footprint compared to the traditional bandstop filter using L-shaped resonators. The measured results show that the filter has a wide passband of 146.7 % (2.1 GHz to 10.15 GHz) with low insertion loss and the stop band of 7.42 % (5.32 GHz to 5.73 GHz) for 3-dB bandwidth. The measured group delay is less than 0.7 ns within the passband except the rejection band.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.224-229
• /
• 2019

Seat of automobile is required to support the comfort to driver and passenger during the driving. The control method of the seat position is changed from manual type to power type, which means using the motor to increase the comfort of the driver. By using the motor, several problems, such as vibration, noise, and over-current, appeared. These problems can be reduced through the control of seat motor. In this study, a control technology of four control variables, which determine profile of the input voltage applying to the seat motor, is proposed to generate the current profile having soft-start and soft-stop. The current flowing through the coil by input voltage is described by mathematical modeling of power seat. It is confirmed that optimized current profile having soft-start and soft-stop can be generated from simulation using the mathematical model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.89-94
• /
• 2006

A compact microstrip band-selective filter for ultra-wideband(UWB) radio system is proposed. The filter combines the traditional short-circuited stub highpass filter and coupled resonator band-stop filter on both sides of the mitered 50-ohm microstrip line. To realize the pseudo-highpass filtering characteristic over UWB frequency band(3.1 GHz to 10.6 GHz), a distributed highpass filter scheme is adopted. Three coupled resonators are utilized to obtain the band stop function at the desired frequency band. By meandering the coupled resonators, there is $29\;\%$ size reduction in footprint compared to the traditional band-stop filter using L-shaped resonators. The measured results show that the filter has a wide passband of $146.7\;\%$(2.1 GHz to 10.15 GHz) with low insertion loss and the stop band of $10.04\;\%$(5.2 GHz to 5.75 GHz) for 3-dB bandwidth. The measured group delay is less than 0.7 ns within the passband except the rejection band.

• Journal of Korean Public Health Nursing
• /
• v.12 no.1
• /
• pp.103-115
• /
• 1998

As the studies that smoking can be a major cause to various diseases have been made, many following researches on the outcome of stop-smoking education were in progress. Even though researches based on the knowledge about smoking and status about the teenagers were prevalent, the research based on the outcomes in long time basis were not in progress. Therefore, I tracked the people who went through 5-Day Stop-Smoking School that has taught through complexed structure of behavioral, intellectual, and psychological education. I made researches on the average of success and the hardest point during their efforts to stop just to show the necessity of going through re-education. The objectives of this study were the ones who have completed the education on the years 1990, 1991. 47 were selected from 364 people that completed the training, and who were able to be contacted on the phone line. This study was conducted from 27 Oct. to 7 Nov. 1997 through verbal interviews based on the questionnaire. The questionnaire used here was made by myself, assisted by my professor. Analysis was made through unstructured open questions. The data was analyzed using SPSS program. The major results were as follows ; 1) General characteristics of the objectives are $97.0\%$ were male, $17\%$ ages below 40s, $34\%$ in the age group of 40s, and $48.9\%$ over 50s. Religiously christian 340/0, buddhist $19.1\%$, no religion or any other reason $46.8\%$. Status married $93.6\%$, unmarried $6.4\%$. There is someone smoking in the family $36.2\%$, no one smokes $63.8\%$. Reputation salary men $55.3\%$, personal business $27.7\%$. 2) The average of success is $42.6\%(20/47)$, the failure is $57.4\%$. 3) The results from the study 'When was the hardest point in the process of stop smoking' : For the successors the first week $33.3\%$, after the first week $66.7\%$. For the failures the first week $55\%$, after first week $45\%$(Statistics not precisely done), the most effective element that helped through the hardest point was the family $40\%$, personal determination $30\%$. 4) The necessity of re-education : Successors needed $55\%$, not needed $45\%$. Failures needed $48.1\%$, not needed $51.9\%$(Statistics not precisely done). The perfect time for reeducation : Successors in 6 months $50\%$, irregular time basis $50\%$. Failures in six months $36.4\%$, after six months $27.3\%$, irregular time basis $36.4\%$(Statistics not precisely done). Synthesizing the result of the study can't generalize the long-term effect of the stop-smoking due to the number of the objectives,. but recognize the fact that 47.6 have experienced success, and also the self-determination and the support from the family are desirable. Seeing the fact that both are great motivation to stop smoking. Since the first week is necessary. The necessity of re-education is rather high, so this education should be planned to be done repeatedly in a long term along with close observation, instead of short education.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.896-905
• /
• 2005

In this paper, we propose a SPD(Selective Packet Delay) scheme to improve the performance of High-Speed Downlink Shared Channel(HS-DSCH) employing N-Channel Stop and Wait retransmission scheme in High Speed Downlink Packet Access(HSDPA) system. The proposed SPD coordinates packet transmissions according to the channel condition. When the channel condition is bad, packet transmission is forcedly delayed, and the designated time slot is set over to other users in good channel condition. Hence, the SPD is able to reduce the average transmission delay for packet transmission under the burst error environments. In addition, we propose two packet scheduling schemes called SPD-LDPF(Long Delayed Packet First) and SPD-DCRR(Deficit Compensated Round Robin) that are effectively combined with the SPD scheme. Simulation results show that the proposed scheme has better performance in terms of delay, throughput and fairness.

• ETRI Journal
• /
• v.24 no.5
• /
• pp.398-400
• /
• 2002

Using $Cr_2O_3$ thin film, we developed a novel etch-stop technique for the protection of silicon surface morphology during deep ion coupled plasma etching of silica layers. With this technique we were able to etch a silica trench with a depth of over 20 ${\mu}m$ without any damage to the exposed silicon terrace surface. This technique should be well applicable to fabricating silica planar lightwave circuit platforms for opto-electronic hybrid integration.