• 설비공학논문집
• /
• 제18권7호
• /
• pp.549-555
• /
• 2006

In the present study, sterilizing and antibacterial performance tests of Polybutylene pipe with nano-silver were carried out in the testing bench of water supply facilities. Experimental results show that the average sterilizing and antibacterial rate of two micro-biological samples such as E. coli and S. aureus is about 90% in case of stillness experimental condition and 99% in case of flowing experimental condition, when elapsed time is 120 hours and 3 hours, respectively. Experimental results also show that the supply water velocity in nano-silver Polybutylene pipe varies from 1 m/s to 1.5 m/s, the elapsed time needed sterilizing rate reach to 100% decreases.

• 한국식품영양과학회지
• /
• 제25권2호
• /
• pp.301-309
• /
• 1996

햄 통조림의 최적 가열살균조건을 설정하기 위하여 한국냉장(주)에서 생산, 판매하고 있는 350g들이 숄더 햄 통조림을 대상으로 105, 110 및 115$^{\circ}C$에서 $F_{0}$-값을 달리하며, 미생물학적 안전성과 제품의 품질을 검토하였다. $F_{0}$-값 4.24분 미만의 조건에서 살균한 제품에서는 살균 후 미생물이 검출되었다. $F_{0}$-값 4.24분 이상의 조건에서 살균한 햄에서는 $F_{0}$-값이 커지더라도 살균중에 pH, POV 및 TBA-가가 큰 변화를 보이지 않았으며, $NH_{2}$-N함량만 미량 증가하는 경향을 보였다. 햄의 색조와 조직감면에서는 $F_{0}$-값 4.24~6.35분 정도로 열처리한 것이 품질이 가장 좋았다. 그러나 햄의 맛, 냄새, 색깔, 조직감 등을 동시에 종합적으로 평가하였을 때 11$0^{\circ}C$에서 $F_{0}$-값6분 정도가 제품의 품질면에서 가장 적절한 가열살균 조건인 것으로 가열살균한 후 15~5$0^{\circ}C$의 온도 범위에서 90일간 저장한 햄 통조림의 품질은 거의 변화가 없었다.

• Journal of Ginseng Research
• /
• 제6권2호
• /
• pp.143-148
• /
• 1982

This study was conducted to investigate to select the optimum condition for the sterilization of white ginseng powder. The powder heated at 100-121 $^{\circ}C$ for 1-30 minutes in a autoclave and irradiated at 2450 MHz microwave for 0.5-3.0 minutes was significantly changed in it's color density and become coagulated state, but their sterilizing effect on a general bacteria and 5. coli group were negligible. Meanwhile W- irradiation to the powder with thickness 1.5-10.5mm for 120 minutes was no changes in it's color. coagulated state and sterilizing effect, but 60Co-${\gamma}$ray irradiation at various dose with 0.1-2.0 Mrad was significant effect for sterilization and stability of the powder during the storage for 4 months at 25 $^{\circ}C$. The optimum dose of 60Co-${\gamma}$ ray irradiation was 0.5-0.7 Mrad.

• Journal of Microbiology and Biotechnology
• /
• 제11권2호
• /
• pp.326-328
• /
• 2001

Pseudomonas diminuta (ATCC 19146) has been typically used in the bacterial challenge test for validation of the sterilizing filtration process. Cell size is critical for determining the retention characteristics of membrane filters with pore-size of $0.2{\mu}m$. The changes of cell sizes after osmotic shocks at 150, 260, 500, and 700 mosM were measured by a particle size analyzer and the changes of their buoyant densities were analyzed with a Percoll gradient. The results indicated that there were no significant differences when cells were cultured in 260 mosM medium and osmotically shocked at 500 and 700 mosM. However, the osmotically shocked cells at 150 mosM showed a 38% increase of the cell size compared to the cells at 260 mosM. From these study, we concluded that the worst case condition for validation of a sterilizing filter would be 500 mosM, not because of changes in the cell size, but due to decrease in cell viability under those conditions.

• 한국환경과학회지
• /
• 제15권11호
• /
• pp.1027-1034
• /
• 2006

Antimicrobial powder was made by exchanging silver ion on calcined oyster shell. On the purpose of application to water clarifier, bail-type media mixed with antimicrobial powder and $0{\sim}30%$ white kaoline were made. The sterilization effect, pore size distribution and zeta potential was tested to indicate the condition for the media of water clarifier. From these tests, it was confirmed that this media have an excellent sterilization power on $G^-\;and\;G^+$ germs. As the concentration of the exchanged silver ion increased, the surface charge density of the anions on the surface of the media also increased. The surface pore size decreased with the concentration of silver ion and 20% more white kaoline ratio. Consequently, mixing ratio of white kaoline would appear to indicate the optimun condition as media have sterilization power.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.12-19
• /
• 2010

This study was carried out to explore the availability of seedling pots made from paper mill sludge using red pepper species called Nokkwang. The seedling pots were made by several conditions such as different mixing ratios between sludge and old newspaper (ONP), sterilizing treatment and latex coating. After 30 day cultivation in a green house, the growth condition of the red peppers was evaluated by comparison with those raised in the plastics seedling pots. The red peppers in the plastics pot showed a better growth than those in the sludge pots. Sterilizing treatment, latex coating and different mixing ratios between paper sludges and ONP did rarely affect a growth rate of the plant and the contents of inorganic elements. However, latex coating contributed to protection of physical structure of the sludge pots in spite of constant water feeding. Even though some inorganic elements from the sludge pots migrated into the bed soils, electronic conductivity of the bed soils was within the proper range for the plant growth. Finally it was confirmed that the seedling pots made from paper mill sludges could be used to cultivate horticultural plants as the alternative to the plastics pots.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 추계학술발표대회 논문집
• /
• pp.191-192
• /
• 2005

This project is to establish an annex clinic center under 5 floors with gross floor area of 3,000 Pyeong behind existing Chosun university Hospital main building with 600 beds. The goal of the design is connecting the new clinic center with the existing main building and completing a combined hospital that has synergy effects. Given the old condition of the hospital and characteristics of the ground, I tried to embody the image of Medical Pulse, which is very alive with strong pulse, and suggest vision of 21st century hospital. First, one main entrance as a combined hospital. For optimum access and functions, I used the entrance of existing building as the only main entrance of new combined hospital, rearrange the road in front of the main building and improve traffic system, and upgrade the image and function of combined main entrance by planning new atrium united robby that makes link to the main building easier. Second, section planning considering the optimum functions and convenience. I established 4 floors linking functionally with the existing building, minimized vertical traffic line, and enhanced convenience through barrier free environment, which is a horizontal traffic line without barriers, crucial to hospital. Third, combined zoning generating synergy effects. I linked sterilizing room with logistics center by operating room and service bridge, and arranged central treatment department horizontally, Also, by horizontally arranging cancer center and department of nuclear medicine close with PET and cyclotron center, I established identity of specialized departments.

• 드라이브 ㆍ 컨트롤
• /
• 제16권1호
• /
• pp.1-6
• /
• 2019

The use of micro bubbles in industrial fields has been increasing in the recent years., particularly micro-bubble sterilization and water purification effects. Various methods have been developed for the generation of micro-bubbles. Depending on the method of generating bubbles, the micro-bubbles can be roughly classified into saturation molding, cavitation and rotation flow types. The objective of this study was to use ventilated tube type as a method of generating micro-bubbles in order to purify large amount of water quality such as lakes and reservoirs. This method shows a difference in efficiency in which micro-bubbles are generated depending on the contact ratio of gas to liquid. The study also investigated the optimal gas liquid contact ratio by applying various orifice methods and investigated the optimum condition of micro-bubble generation by gas Based on this, a technology to develop a micro-bubble generator with a venturi type nozzle shape that has a high water purification effect was developed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제19권3호
• /
• pp.287-299
• /
• 1997

Procurement, cutting, cleansing, freezing, freeze-drying, and demineralization of the allogeneic bone must be made under the germ-free stable condition without bacterial and/or viral contamination. Even thought the bone is procured under the germ free condition, we must have confidence on disinfection of all the solutions that come in contact with tissue during the whole procedure. Lots of antibacterial agents have been introduced for chemical sterilization. Recently ethylene oxide gas sterilization or radiation sterilization is frequently selected as a secendary sterilization procedure. The biological and biochemical response of the graft material differs with the type and concentration of the sterilizing agents, and various toxic reactions have been reported due to the graft material itself and the substance released by the chemicals. The authors conducted the Millipore filter test to observe the toxic effect on L929 fibroblasts according to the effect on activity of succinate dehydrogenase, during the secondary sterilization of the demineralized allogeneic bone powder with irradiation or ethylene oxide gas. The result were as follows : 1. Around the copper disk, positive control group, 10mm diameter discoloration was observed. 2. As same as the negative control group, the disk showed no discoloration. 3. The demineralized allogeneic bone which was sterilized with ethylene oxide gas or irradiation showed no cytotoxicity. 4. From this results, it is suggested that treatment with ethylene oxide gas or irradiation should be effective to sterilize the deminineralized allogeneic bone.

• 한국응용과학기술학회지
• /
• 제32권3호
• /
• pp.412-417
• /
• 2015

2차 오염이 없는 물리적 선박 평형수 처리 장치의 조합별 비교를 통하여 비교적 우수한 조합을 밝혀내는 것이 본 연구의 목적이다. 2008년 IMO에서는 선박 평형수 문제를 제제하기 위해 배출 선박 평형수 내 미생물의 농도를 일정 농도로 규제하게 되었다. IMO 규제 농도를 맞추기 위한 멸균 방법으로는 약품을 이용한 화학적 처리, 전기분해를 통한 차아염소산 처리, UV나 오존 및 플라즈마를 이용하는 방법, membrane을 이용하는 방법 등이 있다. 하지만 어느 방법이나 부분적으로 2차오염이나 선체부식 및 살균효율 등의 단점을 가지고 있는 실정이다. 아울러 이런 단점들을 피해가면서 조류와 미생물을 효율적으로 멸균 시킬 수 있는 방법은 현재까지 미비한 실정이다. 본 연구에서 적용된 처리장치는 전단응력을 이용하여 2차 오염을 발생시키지 않으면서 조류와 미생물을 살균시킬 수 있는 물리적 살균처리장치이다. 본 연구에서는 이 장치의 다양한 type별 조합으로 실험하여 살균 가능한 최저 회전속도에 따른 최고 유량 등을 규명하여 상업적 처리 장치의 설계를 위한 기초자료로 삼고자하였다.