• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3060-3063
• /
• 1999

We made a multi-layer conveyor sterilizing system using UV rays to prolong a storage period of dried marine products. The system is composed of 5 layer conveyor belt of 3 m long each, thus 15 m long in total. It is designed to radiate UV rays for 10 minutes the dried marine products, and can process 300 kg/hour. Eight UV lamps of 30 cm long and 15 W of power with 254 nm wave length are installed in parallel, 15 cm high above in each belt, and 40 lamps in total. The whole system is covered by 1 mm thick metal plates to block the UV rays except a front side which is covered with 5 mm thick plastic plates coated with UV protection film to survey inside of the system. A sterile ratio is about 99.97% with 10 minutes sterilization using this system.

• 설비공학논문집
• /
• 제18권11호
• /
• pp.933-940
• /
• 2006

In this study multi-zone modeling program CONTAM 2.4 developed by NIST is used for estimating the air disinfection rate of the interior of a room which is set up the indoor air disinfection system with filter and ultra violet germicidal irradiation (UVGI). Developed models those enable to predict the transmission of air home contagion such as bacteria and fungus generated in our daily life are useful model for designning air cleaning & ventilation system of building. Also, results indicate that these models are enable to compute the real situation that is almost impossible of carrying out experiment in an actual condition due to biohazard problems and suggest that engineers will use these models as a design tool for the future immune building system.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.319-324
• /
• 2006

The purpose of this study Is to evaluate the efficacy of multizone simulation that enables to grasp of details about microbial contaminant problem in an multistoried apartment. We used actual indoor test data to figure up microbial contaminant level as initial value for the multizone simulation and estimated the various effects of indoor occupant infected with germs and the performance of air sterilization by using multizone simulation in substitute for infeasible experimental approach. The results show that natural ventilation make ourselves generally useful for removing indoor microbial contaminants. The results also show that the performance of air sterilization reach the maximum in the case of using mechanical ventilation and UVGI air sterilizer. The conclusion is that this multizone simulation is useful tool for actual design method for Immune building systems.

• 한국융합학회논문지
• /
• 제10권4호
• /
• pp.147-151
• /
• 2019

현대인들은 가정, 학교 혹은 직장, 병원, 쇼핑몰, 지하철역과 객실, 주차장 등 일상생활의 대부분을 실내에서 보내게 된다. 이렇듯 실내에 갇힌 현대인들은 갇힌 공기 속에서 살아갈 수밖에 없다. 이에 실내 공기질 향상을 위한 공기정화장치는 많이 개발되었으나 대다수의 공기정화장치는 필터에 의한 필터링과 유해세균 살균방식에 있어 자외선이라는 제한된 영역에서의 살균방식에 국한 할 수밖에 없었다. 여기서는 실내 공기질 향상은 물론 원천적으로 실내공기중의 부유 세균을 제거하고, 자외선뿐만 아니라 가시광선에서도 활동하는 광촉매를 적용한 미디어광촉매필터를 활용한 광대역대 활성광촉매를 활용한 융 복합 구조 공기살균정화장치 개발하고자 한다.

• 한국산업보건학회지
• /
• 제31권1호
• /
• pp.105-110
• /
• 2021

Objectives: The purpose of this study was to develop a new sterilization plasma device that would be proficient at sterilizing and removing pathogenic bacteria and viruses, and applicable to air purification systems. Methods: In order to understand the performance characteristics, the discharge characteristics of a packed bed DBD reactor and the ozone reduction characteristics of an ozone filter installed at the outlet of the reactor were investigated. Results: The novel packed-bed DBD reactor was proposed, and it was confirmed that the plasma discharge was uniformly and stably discharged throughout the entire layer, and sufficient ozone was generated for sterilization. The ozone filter was tested for three methods: adsorption, adsorption-decomposition, and catalytic decomposition. When the filter thickness was 30 mm, the ozone concentrations were 0.03 ppm, 0.01 ppm, and 0.21 ppm, respectively. The adsorption and adsorption-decomposition methods satisfied the EPA standard of less than 0.05ppm, but the catalytic decomposition method did not. Conclusions: It was confirmed that the adsorption-decomposition method has relatively excellent ozone filter performance and can provide the best ozone filter.

• 환경위생공학
• /
• 제16권4호
• /
• pp.9-20
• /
• 2001

The objective of this study was to improve sanitary conditions at the beauty shops by informing the owners and employees to be aware of the public health. The data were obtained by the Physical investigation (August 1 to 30, 2001) of the sanitary Problems at 112 beauty shops in Daegu Metrpolitan area and by the surveys from the employees and customers. By analysis these data with SAS/PC+(ver. 6.12) and $x^2-test$, we have obtained the following results. 1. The numbers of the beauty shop workers (67.86% of the shops) were two including the owner, and only 18.75% of the workers had the regular public health training session. Even at the training sessions, no public health specialist was available as an instructor. 2. Sanitary conditions of the floor (92.76%), washer (88.93%) and rest room (74.11%) at the beauty shops were satisfactory. However, only 3.57% of the beauty shop used the vacuum cleaner that would be far more effective than the bloom to remove hairs from the floor. 3. About 91.07% (102 shops) did not or poorly sterilize equipments, and 91.76% (103 shops) did not store the sterilized or non-sterilized equipments separately. The shops that had the ultraviolet sterilizer that is required by the public health regulation were 53.57% (60 shops), and only 2.67% (3shops) actually used it. 4. About 82.14% (72 shops) used Oxyclean and detergent for washing the fabrics such as towels and gowns. About 11.61% (13 shops) used only detergent and 3.57% (4 shops) used the boiling sterilization method. No shop used the customer gown once per customer, and only 2.68% (3 shops) washed the used gown daily.

• The Journal of Advanced Prosthodontics
• /
• 제3권2호
• /
• pp.63-68
• /
• 2011

PURPOSE. The object of this study was to investigate the effect of UV irradiation (by a general commercial UV sterilizer) on anodized titanium surface. Surface characteristics and cellular responses were compared between anodized titanium discs and UV irradiated anodized titanium discs. MATERIALS AND METHODS. Titanium discs were anodized and divided into the following groups: Group 1, anodized (control), and Goup 2, anodized and UV irradiated for 24 hours. The surface characteristics including contact angle, roughness, phase of oxide layer, and chemical elemental composition were inspected. The osteoblast-like human osteogenic sarcoma (HOS) cells were cultured on control and test group discs. Initial cellular attachment, MTS-based cell proliferation assay, and ALP synthesis level were compared between the two groups for the evaluation of cellular response. RESULTS. After UV irradiation, the contact angle decreased significantly (P<.001). The surface roughness and phase of oxide layer did not show definite changes, but carbon showed a considerable decrease after UV irradiation. Initial cell attachment was increased in test group (P=.004). Cells cultured on test group samples proliferated more actively (P=.009 at day 2, 5, and 7) and the ALP synthesis also increased in cells cultured on the test group (P=.016 at day 3, P=.009 at day 7 and 14). CONCLUSION. UV irradiation induced enhanced wettability, and increased initial cellular responses of HOS cells on anodized titanium surface.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제23권2호
• /
• pp.63-72
• /
• 2017

Purpose: The purpose of this study is to review the material handling system of the Airborne Infection Isolation Hospitals which is the one of the key elements of infection control and to improve the basic data for the planning and design of those facilities. Methods: Research was conducted by literature reviews and case studies for the material handling system of domestic and foreign Isolation hospitals. Results: The result of this study can be summarized into three points. First, a general isolation unit and a high level isolated unit need to be distinguished in terms of efficiency and safety. In particular, it is desirable that a high level isolated unit have to completely separate clean and soiled circulations, and soiled corridor should be installed by those means. By doing this, the medical staff can observe patient rooms and supply clean materials directly in the clean zone without wearing PPE, so that safety and work efficiency can be improved at the same time. Second, for the safe disposal of wastes, it is desirable to install a dedicated sterilizer per ward and sterilize it at least in the ward. In addition, It is desirable to install a central waste treatment room and a dedicated soiled corridor in consideration of the inadequate handling capacity and emergency situation. Third, the characteristics of material flow chart in the negative pressured isolation hospitals and the corresponding material handling system have been presented. Implications: Infection control is very important in safety, but it is necessary to respond to the symptoms of the patient.

• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.379-386
• /
• 2001

This study was performed to evaluate the sealing ability of various retrograde filling materials by using bacterial penetration and dye penetration test. One hundred and forty extracted human teeth with single, straight canals and mature apiece were collected and used for this study. All canals were instrumented using an engine driven Ni-Ti file (ProFile). After removing 3mm from the apex of tooth, a standardized 3mm root end cavity was prepared using an ultrasonic instrument. The 70 teeth were randomly divided into 7 groups : 6 groups for retrograde filling using Super-EBA, ZOE, Chelon-Silver, IRM, ZPC and amalgam. The 7th group was used as a negative control. Nail varnish was applied to all external root surfaces to the level of the reseated root ends to prevent lateral microleakages. The specimens were then sterilized in an ethylene oxide sterilizer for 24 hours. 2 mm of the reseated root was immersed in a culture chamber containing a Tripticase Soy Broth with a phenol red indicator. The coronal access of each specimen was inoculated every 72 hours with suspension of Proteus vulgaris. The culture media were observed every 24hours for color change indicating bacterial contamination. The specimens were observed for 4weeks. The remaining 70 teeth were submitted to a dye penetration test. The canals of all teeth were first sealed with AH26 and obturated using an Obtura II system. Root resection, root end preparation and retrograde filling was performed as above. All specimens were suspended in 2% methylene blue dye for 72 hours before being ion gitudinally split. The degree of dye penetration was then measured using a stereomicroscope at 10 magnification and evaluated. The results were as floows : 1. In the bacterial penetration, the degree of leakage was the lowest in the Super-EBA, followed by, in ascending order, ZOE, Chelon-Silver IRM and ZPC. The amalgam showed highest bacterial leakage of all(p<0.01). 2. In the dye penetration, the degree of microleakage was the lowest in the Chelon-Silver and Super-EBA, followed by, in ascending order, IRM, ZPC. The ZOE and amalgam showed the highest microleakage of all (p<0.05). These results suggested that the eugenol based cement, Super-EBA, have excellent sealing ability as a retrograde filling material.

• 가정과삶의질연구
• /
• 제28권6호
• /
• pp.81-94
• /
• 2010

This qualitative research was designed to explore the use of housing among Korean Chinese people in Harbin, China. Focusing on the use which based on the epistemology of housing adjustment, this was particularly designed to examine its cultural assimilation and acculturation on the way of life course, it employed the in-depth interview on the oral history of 5 interviewees in their 60s and 70s, individualized interviews were conducted from May 28 to 31 in 2010. Key findings were summarized as follows; 1. The free market reform in China resulted in privatization that allowed respondents to become homeowners, and the ownership was viewed as part of family asset centered upon a sense of solidarity. 2. Although homeowners in multi-story houses were responsible to decorate interior spaces, the common features in using interior spaces were found: entrance had no thresholds; kitchen was small, lack of storage cabinets, tile-flooring; washers were installed inside bathroom; and newly built apartment didn't have proper space to store Korean fermented foods. It was observed that housing adaptation outweighed housing adjustment. Those who used to live in Chinese houses with indoor-wearing-shoes or Russian houses with indoor-wearing-slippers were receptive to the use of dining table and bed, and the community heating system discouraged the use of individual electric water heater because of high electricity cost. 3. In daily life, eating habit wasn't much changed to the Chinese style, meals were shared, dish sterilizer was popular, and Kimchi fridge wasn't used. Because of the influence of the Chinese culture, such Korean traditions as ancestral rites and bedroom allocation tradition faded away, but traditional family values remained unchanged. In conclusion, Korean Chinese people experience normative housing deficits and adaptation selectively incurred. It's implied that residential design meets the needs resulting from the dual culture in terms of cultural assimilation and acculturation.