• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.14-17
• /
• 2008

Recently, several advanced flow visualization techniques such as Particle Image Velocimetry (PIV) including stereo PIV, holographic PIV, and dynamic PIV have been developed. These advanced techniques have strong potential as the experimental technology which can be used for verifying numerical simulation. In addition, there would be indispensable in solving complicated thermo-fluid flow problems not only in the industrial fields such as automotive, space, electronics, aero- and hydro-dynamics, steel, and information engineering, but also in the basic research fields of medical science, bio-medical engineering, environmental and energy engineering etc. Especially, NT (Nano Technology) and BT (Bio Technology) strongly demand these advanced measurement techniques, because it is difficult for conventional methods to observe most complicated nano- and bio-fluidic phenomena. In this paper, the basic principle of these advanced visualization techniques and their practical applications which cannot be resolved by conventional methods, such as flow in automotive HVAC system, ship and propeller wake, three-dimensional flow measurement in micro-conduits, and flow around a circulating cylinder will be introduced.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.1080-1083
• /
• 1997

Micro-stereolithography is a newly proposed technology as a means that can fabricate 3D micro-structures of free form. It makes a 3D structure by dividing the shape into many slices of relevant thickness along honzontal surfaces, hardening each layer of slice with a laser, and stacking them up to a des~red shape. Scale effect becomes important in this micro-fabrication process, d~fferently from the conventional stereolithography. To realize this micro-stereolithography technology, we developed an equipment using Ar+ laser, xyz stages, controllers and all the optic devices. Using the equipment, a number of micro-structures were successfully fabricated including a winecup of several tens of micrometers.

• Annual Conference of KIPS
• /
• 2005.11a
• /
• pp.751-754
• /
• 2005

본 논문에서는 인간의 머리부분을 흉내 낸 시각 시스템으로서, 4 축의 각도 조절이 자유로운 시스템에 두 개의 CCD 카메라를 연결하여 실시간으로 입력되는 영상 데이터로부터 레이져 포인터의 위치 정보를 추출한 후 주 카메라를 이용하여 시스템 전체를 레이저 포인터의 중심위치로 이동한 후 버전스 각도(vergence angle)를 이용하여 실시간으로 오브젝트의 절대거리를 측정하는 효과적인 시스템을 제안하였다. 객체까지의 거리는 교차식 카메라를 적용한 스테레오 비전 시스템을 사용하여 삼각측량의 방법으로 거리를 측정하였다. 실험결과 객체에 대한 거리 측정 오차가 평균 2% 나타남으로써 제안한 알고리즘을 이용한 이동객체의 거리측정 가능성을 제시하였다.

• The Journal of Korea Robotics Society
• /
• v.3 no.1
• /
• pp.42-51
• /
• 2008

Robots need to understand as much as possible about their environmental situation and react appropriately to any event that provokes changes in their behavior. In this paper, we pay attention to topological relations between spatial objects and propose a model of robotic cognition that represents and infers temporal relations. Specifically, the proposed model extracts specified features of the cooccurrence matrix represents from disparity images of the stereo vision system. More importantly, a habituation model is used to infer intrinsic spatial relations between objects. A preliminary experimental investigation is carried out to verify the validity of the proposed method under real test condition.

• Journal of the Korean Society of Visualization
• /
• v.2 no.1
• /
• pp.32-38
• /
• 2004

A new PIV technique was developed for decreasing optical error which was created during simultaneous measurements of velocity fields at a wall-normal plane and wall-parallel plane by a plane PIV and a Stereo-PIV systems. For experimental study, two different Reynolds number based on momentum thickness, Re$_{ =514 and 934 were generated in a blowing type wind tunnel under the condition of zero pressure gradient. The two Nd:Yag laser systems and three CCD cameras were synchronized. to obtain instantaneous velocity fields at the same time. To avoid optical noise at the crossing line by the two laser light sheets, a new optical arrangement using polarization was applied. The obtained velocity fields show the existence of hairpin packet structure vividly and the idealized hairpin vortex signature is confirmed by experiment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.9B
• /
• pp.1267-1276
• /
• 2001

본 논문은 스테레오 시차정보를 이용하여 스테레오 비젼 시스템에서 표적물체의 영역 및 위치를 구하고, 표적물체를 제외한 배경을 분리함으로써 표적물체 영역을 효과적으로 추출할 수 있는 새로운 알고리즘을 제시하였다. 즉, 제안한 알고리즘은 스테레오 비젼 시스템에서 얻어지는 양안시차 정보와 각 픽셀의 유사도를 이용하여 1차적으로 배경을 분리한 후 그 결과에 히스토그램을 적용하여 최종적으로 표적물체 영역을 추출하였다. 실험 결과 제안한 알고리즘은 스테레오 입력 영상에서 배경잡음과 관계없이 표적 물체영역을 추출할 수 있었고, 이의 구현으로 스테레오 원격작업 시스템이나 적응적인 스테레오 물체 추적기 등의 구현 가능성을 제시하였다.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.342-348
• /
• 1998

The purpose of this paper is to extract fast DEM (Digital Elevation Model) using satellite images. DEM extraction consists of three parts. First part is the modeling of satellite position and attitude, second part is the matching of two images to find corresponding poults of them and third part is to calculate the elevation of each point by using the result of the first and second part. The position and attitude modeling of satellite is processed by using GCPs. A area based matching method is used to find corresponding points between the stereo satellite images. In the DEM generation system, this procedure holds most of a processing time, therefore a new fast matching algorithm is proposed to reduce the time for matching. The elevation of each point is calculated using the exterior orientation obtained from modeling and disparity from matching. In this paper, the SPOT satellite images, level IA 6000 $\times$6000 panchromatic images are used to extract DEM. The experiment result shows the possibility of fast DEM. extraction with the satellite images.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.61-67
• /
• 1998

Rapid prototyping becomes widely used in design and manufacturing of mechanical and aerospace engineering. Here a drag valve disk consisted of complicate configuration has designed by CAD, and prototyped by a stereolithography apparatus (SLA) to confirm the design configuration. Also the prototyped valve disk was used for checking if it could be applied for casting from the view point of accuracy, cost, and time. The rapid-prototyped disk by SLA was compared with a high-speed machined disk by MAKINO V55, and it is found that the prototyping of the disk by SLA appears more economical, more accurate and faster than by machining with MAKINO V55.

• The Journal of Korea Robotics Society
• /
• v.2 no.2
• /
• pp.143-151
• /
• 2007

This paper deals with a tangible interface system that introduces robot as remote avatar. It is focused on a new method which makes a robot imitate human arm motions captured from a remote space. Our method is functionally divided into two parts: capturing human motion and adapting it to robot. In the capturing part, we especially propose a modified potential function of metaballs for the real-time performance and high accuracy. In the adapting part, we suggest a geometric scaling method for solving the structural difference between a human and a robot. With our method, we have implemented a tangible interface and showed its speed and accuracy test.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.77-83
• /
• 2001

To product the map by terrestrial photogrammetry method, a few rather nuisance stereo image acquiring processing and plot using expensive analytical instruments have to be performed. In this study, plot was made by acquiring and rectification image using simple method rather than above it. For this, geometry rectification system was constructed for the generation of single ortho-image analysis. and these ortho-images of architecture were made and analysed by appling various warping methods. As a result, the performance of single image analysis could be estimated, and it is expected that the application of this is possible to various non-topographic photogrammetry.