• Analytical Science and Technology
• /
• v.13 no.4
• /
• pp.440-445
• /
• 2000

The techniques for manipulation of various micro-tools were essential for particle isolation and chemical analysis of micro-size particles. This report described the detailed techniques for the preparation and handling of several micro-tools. Presence of uranium particles in smeared filter paper were identified by using the solid track detector. The uranium particles were isolated using the micro-tools under the stereomicroscope and then transferred to the filament of TIMS for the determination of isotope ratios.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.13-18
• /
• 2009

To increase mechanical properties of the hydroxyapatite/poly (L-lactide) (HA/PLLA) composite which was a potential bone substitute material, HA was modified by the surface grafting with D-lactide (DLA) and the formation of stereocomplexes between components was introduced. The composite films were prepared by the solvent-nonsolvent technique to minimize the precipitation of HA during drying. The structure and properties of the composites were investigated by thermal gravimetric analysis (TGA), differential scanning calorimeter, and scanning electron microscopy, and mechanical property measurements. TGA results showed that the amount of DLA grafted on the HA surfaces (g-HA) was 6 wt%. The obtained g-HA exhibited better dispersity in an organic solvent than HA. The formation of stereocomplexes in the composites was confirmed by the change in melting temperature. The mechanical properties of g-HA/PLLA composites were increased, compared to the HA/PLLA composites.

• Korean Journal of Remote Sensing
• /
• v.26 no.4
• /
• pp.439-449
• /
• 2010

This paper reports experiments and analysis work done to find out the cause of Y parallex for stereo pairs of KOMPSAT-2 images and means to improve the Y parallex problem. We could conclude that the Y parallex problem was caused by resampling errors of KOMPSAT-2 PANchromatic bands, induced by the process of warping PANchromatic band with reference to multispectral bands. We could also conclude that a rigorous warping process could improve resampling of KOMPSAT-2 PANchromatic band and remove the Y parallex problem significantly. We also confirmed that a rigorous warping process could also remove blocky brightness patterns present on KOMPSAT-2 PANchromatic band. Therefore, by implementing more rigorous warping process within KOMPSAT-2 scene generation procedures, KOMPSAT-2 geometric and radiometric quality will be improved.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_1
• /
• pp.693-703
• /
• 2019

Long-term coastal topographical data is critical for analyzing temporal and spatial changes in shorelines. Especially understanding the change trends is essential for future coastal management. For this research, in the data preparation, we obtained digital aerial images, terrestrial laser scanning data and UAV images in the year of 2009. 2018 and 2019 respectively. Also tidal observation data obtained by the Korea Hydrographic and Oceanographic Agency were used for Bangamoeri beach located in Ansan, Gyeonggi-do. In the process of it, we applied the photogrammetric technique to extract the coastline of 4.40 m from the stereo images of 2009 by stereoscopic viewing. In 2018, digital elevation model was generated by using the raw data obtained from the laser scanner and the corresponding shoreline was semi-automatically extracted. In 2019, a digital elevation model was generated from the drone images to extract the coastline. Finally the change rate of shorelines was calculated using Digital Shoreline Analysis System. Also qualitative analysis was presented.

• Journal of Conservation Science
• /
• v.31 no.1
• /
• pp.21-27
• /
• 2015

The Phoenix-shaped Glass Ewer, which is No. 193 National Treasure, was seriously damaged by a unique form of green glass pieces when excavated among a number of burial accessories of Hwangnamdaechong known to have been formed in the 5th century. While it has long been exhibited at the National Museum of Korea since its treatment for conservation treatment at conservation science laboratory in 1984, the existing adhesive materials seriously deteriorated for the 30 years, and the condition was quite unstable. The epoxy resin used as a restorative materials turned yellowing due to the light and heat so much that it was no longer able to exhibit it in a stable and effective manner. As a result, a re-treatment for conservation was conducted lately. This study focuses on the three pieces of Gold wires used to carefully wrap up the handle of the Phoenix-shaped Glass Ewer broken into three pieces, which has not been studied so far. As for the analysis method for Gold wires, SEM-EDS and Stereo Microscope were used for nondestructive analysis. First of all, the result of the SEM-EDS analysis shows that the composition was Au 91.9 wt.%-Au 92.8 w.t% and Ag 5.9 wt.%-Ag 6.5 wt.%, which indicates that it was an alloy made of Au and Ag. The production technique of Gold wires was also observed by means of optical microscopes. In general, Gold wires were manufactured by a drawing process in which a lump of gold was beaten or pulled out of a hole or by a process of twisting a gold plate. However, Gold wires separated from the handle of the Phoenix-shaped Glass Ewer did not involve any trace of twisting on the surface. Rather, fine vertical stripes were observed with the sections filled up. Hence, it is thought that this Ewer went through a drawing process and then was mended. As a result, no certain relation with the golden mending material used for the Phoenix-shaped Glass Ewer was verified. The findings above indicate that most of the existing researches on Gold wires recognized them, not as separate remains, but merely as a component of other golden remains. Thus, there has been little systematic study on the manufacturing techniques of Gold wires. The future study on Gold wires may verify the correlation between the Gold wires used to fix the handle of the Phoenix-shaped Glass Ewer, which is examined in this study, with that of golden remains in the Silla era.

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.352-358
• /
• 1987

Rate constants for the hydrolysis of para-substituted phenyl N-(p-chlorobenzoyl)chloroformimidate (I) derivatives in 1 : 4 dioxane-water at $25^{\circ}C$ have been determined. Rate data, substituent effect $(\rho\>{\rho}^+)$, product analysis and MO calculation indicate that the uncatalyzed reaction proceeds through an $S_N1$ mechanism involving the formation of azocarbonium ion (II) below pH 3.0, and the base-catalyzed reaction proceeds through an $S_N2$ mechanism via transition state (III) above pH 4.0. The relative stability of four peri planar conformational isomers were (E-ap) > (Z-ap) > (E-sp) > (Z-ap), respectively, and the most stable stereo structures shows that the Y-substituted phenyl group $(C_6H_4-Y)$ occupy vertical $(90^{\circ})$ position on the plane of the benzimidochloroformyl group in (E-ap) conformer. The nucleophilic substitution of water molecule occurs by sigma attack to the activatived azomethine carbon atom of (I) derivatives.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1507-1514
• /
• 2016

Full-image guided filter reflects all pixels of image in filtering by using weight propagation and two-pass model, whereas the existing guide filter is processed based on the kernel window. Therefore the computational complexity can be improved while maintaining characteristics of guide filter, such as edge-preserving, smoothing, and so on. In this paper, we propose an efficient VLSI architecture for the full-image guided filter by analyzing the data dependency, the data frequency and the PSNR analysis of the image in order to achieve enough speed for various applications such as stereo vision, real-time systems, etc. In addition, the proposed efficient scheduling enables the realtime process by minimizing the idle period in weight computation. The proposed VLSI architecture shows 214MHz of maximum operating frequency (image size: 384*288, 965 fps) and 76K of gates (internal memory excluded).

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.8-15
• /
• 2006

Obstacle detection is an important task for many mobile robot applications. The methods using stereo vision and optical flow are computationally expensive. Therefore, this paper presents a vision-based obstacle detection method using only two view images. The method uses a single passive camera and odometry, performs in real-time. The proposed method is an obstacle detection method using 3D reconstruction from taro views. Processing begins with feature extraction for each input image using Dr. Lowe's SIFT(Scale Invariant Feature Transform) and establish the correspondence of features across input images. Using extrinsic camera rotation and translation matrix which is provided by odometry, we could calculate the 3D position of these corresponding points by triangulation. The results of triangulation are partial 3D reconstruction for obstacles. The proposed method has been tested successfully on an indoor mobile robot and is able to detect obstacles at 75msec.

• Journal of Environmental Health Sciences
• /
• v.36 no.1
• /
• pp.44-51
• /
• 2010

This study aimed to develop analytical method for 8-isoprostanes as biomarkers for oxidative stress with LC/MS/MS technique and to apply the method for human urine samples. Analyzed compounds for urinary oxidative stress markers were 7 stereo-isomers of prostaglandins and the internal standard (iso-$PGF_{2{\alpha}}-d_4$) was used to adjust the recovery rate. The method for determining urinary iso-$PGF_{2{\alpha}}$ consisted of solid phase extraction and LC/MS/MS detection. Separation of isomers of prostaglandins completed by porous graphitic carbon column and buffer solution. Detection limits for urinary markers of oxidative stress, iso-$PGF_{2{\alpha}}$ with LC/MS/MS were 0.01 ng/ml by S/N ratio 3 and 0.028 ng/ml by calculated as to FDA method. The recovery (92.8~101.9%) and precision (8.8~20.7%) of analysis were feasible for detecting iso-$PGF_{2{\alpha}}$ in real human urine samples. We detected 4 isomers of prostaglandins in human urine samples. Mean (standard deviation) of urinary iso-$PGF_{2{\alpha}}$ concentration were 0.231 (0.117) ng/mg creatinine for smoking group and 0.154 (0.082) ng/mg creatinine for non-smoking group.

• Journal of Korean Society of societal Security
• /
• v.1 no.2
• /
• pp.73-78
• /
• 2008

Recently, large scale natural disasters such as floods and typhoons due to climate change have been occurring all over the world causing severe damages. Among the various efforts to reduce and recover damages, recently, advanced information technology and remote sensing techniques are applied in disaster management. In this study, a real-time automated damage estimation system using information technology and spatial imagery was developed to accomplish prompt and accurate disaster damage estimation. This system is able to estimate the damage amounts of public facilities such as roads, rivers, bridges automatically through spatial imageries including ground based digital images, aerial photos, satellite images of disaster sites. Based on these spatial imageries, the damage amounts are analyzed in the Web-GIS based analysis system. Consequently, the digital damage reports such as digital disaster information sheets and damage maps can be made promptly and accurately. This system can be a useful tool to carry out prompt disaster damage estimation and efficient disaster recovery.