• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.98-105
• /
• 2017

In recent years, compression ignition engine has been equipped with some control devices such as common rail injection system and turbocharger. In order to control the large number of input parameter appropriately in consideration of $NO_x$, HC and engine power as the engine output objectives. The model construction which reproduces the characteristic value of $NO_x$, HC and engine power from input parameter is needed. In this research, the stepwise method was applied to construct the compression ignition engine model. By using the preliminary experimental data of single cylinder compression ignition engine, the prediction model of $NO_x$, HC and engine power on single injection compression ignition engine was built and compared with the main experimental data.

• 센서학회지
• /
• 제25권1호
• /
• pp.13-19
• /
• 2016

Nowadays, most major automobile manufacturers are very interested, and actively involved, in developing driver alcohol detection system for safety (DADSS) that serves to prevent driving under the influence. DADSS measures the blood alcohol concentration (BAC) from the driver's breath and limits the ignition of the engine of the vehicle if the BAC exceeds the reference value. In this study, to optimize the sensor array of the DADSS, we selected sensors by using three different methods, configured the sensor arrays, and then compared their performance. The Wilks' lambda, stepwise elimination and filter method (using a principal component) were used as the sensor selection methods [2,3]. We compared the performance of the arrays, by using the selectivity and sensitivity as criteria, and Sammon mapping for the analysis of the cluster type of each gas. The sensor array configured by using the stepwise elimination method exhibited the highest sensitivity and selectivity and yielded the best visual result after Sammon mapping.

• 화약ㆍ발파
• /
• 제25권1호
• /
• pp.31-43
• /
• 2007

현재 대부분의 국내 터널은 천공발파 기법을 이용하여 굴착되고 있다. 심발발파는 터널굴착면의 1 자유면 상태에서 가장 먼저 발파가 이루어지므로 터널발파에서 가장 중요한 단계이며 전체의 굴진효율과 진동 및 소음을 결정하는 역할을 한다. 여기서는 기존의 V-Cut 공법의 시공 편의성을 최대한 활용하면서 굴진효율을 개선시킨 새로운 심발발파 방법인 SAV-Cut (Stage Advance V-Cut) 공법을 소개한다. SAV-Cut 공법은 건설교통부에서 지정하는 건설 신기술(제518호)으로서 중앙공을 천공 및 선기폭하여 암반을 약화시킨 다음 경사공을 단계별로 기폭하는 것을 주요 특징으로 하고 있다. SAV-Cut 발파공법의 메커니즘을 수치해석과 여러 현장에 실제 적용을 통하여 검증하였고, 발파효율의 증대와 진동저감 효과를 확인하였다.