• 한국운동역학회지
• /
• 제21권5호
• /
• pp.561-571
• /
• 2011

The purpose of this study was to perform the kinematic analyses of the women's pole vault skills in IAAF World Championships Daegu 2011. Subjects were the 1st through 8th place finishers in the pole vault. The kinematic analyses were divided into four phases: two dimensional run up analysis, and three dimensional analyses for the remaining plant, swing up, and extension phases. Run-up variables consisted of run up distance, number of steps, average step length, ratio of step length to height, average velocity at the final 5~10 m, approach position. Three variables were analyzed during plant: pole angle, center of gravity (COG) velocity, and COG takeoff angle. Swing up phase variables included: pole flection angle, COG velocity (horizontal, vertical, resultant), COG trajectory and bar approach angle of COG. Compared to the 2009 World Championships in Berlin, the average vault height increased, while run up velocity and approach position were almost unchanged. However, horizontal velocity during the last two steps of the final approach decreased noticeably compared to speeds from 1990. These results reflect the change in both technique and physical fitness in pole vaulters. During extension, the peak height of COG surpassed the clearance height by an average of 0.11m. These specific results can help coaches and athletes modify training and improve performance.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2005년도 춘계학술발표회 및 정기총회 2권1호(통권2호)
• /
• pp.215-226
• /
• 2005

To study the influence of an lower part on the seismic response of a spatial structure as the upper part of a structure, as a first step, authors subsititude the upper part and the lower part of a structure to single degree of freedom systems indivisually, and set up structural models connected by them. It is clarified that the mass ratio and the period ratio of an upper part to a lower part are important parameteres to find the amplification or reduction of the sesimic response of an upper part by considering of a lower part.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 추계 학술대회논문집
• /
• pp.95-102
• /
• 2002

Studies of the numerical characteristics of implicit upwind schemes, such as upwind ADI, Line Gauss-Seidel(LGS) and Point Gauss-Seidel(LU) algorithms, for preconditioned Navier-Stokes equations ate performed. All the algorithms are expressed in approximate factorization form and Von Neumann stability analysis and convergence studies are made. Preconditioning is applied for efficient convergence at low Mach numbers and low Reynolds numbers. For high aspect ratio computations, the ADI and LGS algorithms show efficient and uniform convergence up to moderate aspect ratio if we adopt viscous preconditioning based on min- CFL/max- VNN time-step definition. The LU algorithm, on the other hand, shows serious deterioration in convergence rate as the grid aspect ratio increases. Computations for practical applications also verify these results.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권5호
• /
• pp.259-264
• /
• 2000

In this paper, the characteristics of piezoelectric transformer is studied for driving CCFL(Cold Cathode Fluorescent Lamp). In order to investigate the effects of geometrical dimensions, λvibration-mode type piezoelectric transformers with different sizes in the length(l), width$(\omega)$ and thickness(t) are made of ceramics with PZT-PMWS compositions. The increases in temperature and aging effect are also measured in the transformer of PT-3 sample under the condition of operation continuously for 10 hrs. As the results of dimensional effects, the output power and voltage step-up ratio are largely affected by the ratio of length to thickness(l/t) rather than that of length to $width(l/\omega)$. The output power and step-up ratio are increased with increasing l/t. On case of PT-3, the output voltages are 510[Vrms] at 36[Vrms] in input voltage, $100[k\Omega]$ in load resistance. Temperature increases and variation of output voltages are $10[^{\circ}C]$ and less than 5[%], respectively.

• 상하수도학회지
• /
• 제20권3호
• /
• pp.397-402
• /
• 2006

The treatment characteristics of leachate produced from pretreatment facilities like composting and feeding were investigated in a mesophilic anaerobic treatment. Experiments were performed in two phase which were acidification and methane fermentation. The acidification step was optimized for OLR from 1 to $4.5kg\;COD/kg\;VS{\cdot}day$ without adding NaOH. As experiment dates became longer, the solubilization ratio of particles increased up to 30% over 70 days. TVA was generated up to maximum 9,970mg HAc/L at OLR of $2kg\;COD/kg\;VS{\cdot}day$. But TVA was generated to minimum 6,519mg HAc/L at OLR of $4.5kg\;COD/kg\;VS{\cdot}day$. The acidification ratio was analyzed from 10.9% to 3.8% at OLR of $2kg\;COD/kg\;VS{\cdot}day$ and $4.5kg\;COD/kg\;VS{\cdot}day$ respectively. After 55 days, salt contents in the acid fermenter were accumulated and stabilized at the concentration of 3,150mg/L. Sodium ion($Na^+$) concentration was stabilized at 1,300mg/L. At methane fermentation step, biogas was generated up to 750ml and 937.5ml at the feeding volume of 20ml and 25ml respectively for acid fermented liquid during 25 days. About 80% of total biogas was generated during early 15 days and 95% were generated during 18 days respectively. After 25 days of the BMP test, acetic acid was removed approximately 97% and 98%, in case of those two experimental conditions.

• 한국운동역학회지
• /
• 제21권5호
• /
• pp.551-560
• /
• 2011

The purpose of this study was to perform the kinematic analyses of the men's pole vault skills in IAAF World Championships Daegu 2011. Subjects were the 1st through 8th place finishers in the pole vault. The kinematic analyses were divided into four phases: two dimensional run up analysis, and three dimensional analyses for the remaining plant, swing up, and extension phases. Run-up variables consisted of run up distance, number of steps, average step length, the ratio of step length to his height, average velocity at the final 6~11 m, approach position. Three variables were analyzed during plant: pole angle, center of gravity (COG) velocity, and takeoff angle of COG. Swing up phase variables included: pole flexion angle, COG velocity (horizontal, vertical, resultant), COG trajectory and bar approach angle of COG. Compared to the 2009 World Championships in Berlin, the average vault height, run up velocity and approach position increased. However, horizontal velocity during the last two steps of the final approach decreased dramatically compared to speeds from 1990. These results reflect the change in both technique and improved physical fitness in pole vaulters. During extension, the peak height of COG averaged 0.3m higher then COG height when the pole was released. These specific results can help coaches and athletes modify training and improve performance.

• 전력전자학회논문지
• /
• 제3권2호
• /
• pp.131-137
• /
• 1998

태양전지의 출력특성은 일사량, 온도와 부하에 의해 크게 변동하기 때문에 가능한 한 많은 에너지를 얻기 위해서는 태양전지의 출력을 항상 최대로 제어할 필요가 있다. 또한 가정용 부하는 교류부하인 반면에 태양전지의 출력은 직류이므로 태양광 발전 시스템에서는 인버터가 필수적이며, 단위역률을 갖는 정현파 전류 및 전압을 계통에 공급해 주어야 한다. 본 논문에서는 계통연계형 태양광 발전시스템을 승압쵸퍼와 전압형 인버터로 구성하였다. 전력비교에 따른 시비율을 변화시켜 일사량과 온도변화에 관계없이 항상 최대출력점을 추적하도록 승압쵸퍼를 제어하였고, 전압형 인버터는 위상동기를 위해서 계통전압을 검출하여 계통전압과 인버터 출력을 동상 운전하므로 고역률과 저고조파 출력으로 부하와 계통에 전력이 공급되도록 제어하였다.

• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.220-226
• /
• 2000

The piezoelectric material for piezoelectric transformer needs the high electromechanical coupling factor( $k_{p}$) the piezoelectric constant( $d_{33}$) and the mechanical quality factor( $Q_{m}$)in order to obtain high voltage step-up ratio and low temperature rising. In this study the piezoelectric transformers were fabricated using Pb［$Zr_{0.45}$/ $Ti_{0}$48//L $u_{0.02}$(M $n_{1}$3//S $b_{2}$3/)$_{0.05}$］ $O_3$(PMS-PZT) and Pb［Z $r_{0.25}$/ $Ti_{0.375}$(M $g_{1}$3//N $b_{2}$3/)$_{0.375}$］ $O_3$+0.5wt%Mn $O_2$(PMN-PZT) ceramics. The piezoelectric properties of PMS-PZT and PMN-PZT were measured. The voltage set-up ratios of the piezoelectric transformers using PMS-PZT and PMN-PZT were the value of 15, 20 respectively under 100$_{KΩ}$ in Rosen type transformer.r.ormer.r.r.r.r.r.r.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.153-153
• /
• 2016

Aluminum alloys have poor corrosion resistance compared to the pure aluminum due to the additive elements. Thus, anodizing technology artificially generating thick oxide films are widely applied nowadays in order to improve corrosion resistance. Anodizing is one of the surface modification techniques, which is commercially applicable to a large surface at a low price. However, most studies up to now have focused on its commercialization with hardly any research on the assessment and improvement of the physical characteristics of the anodized films. Therefore, this study aims to select the optimum temperature of sulfuric electrolyte to perform excellent corrosion resistance in the harsh marine environment through electrochemical experiment in the sea water upon generating porous films by variating the temperatures of sulfuric electrolyte. To fabricate uniform porous film of 5083 aluminum alloy, we conducted electro-polishing under the 25 V at $5^{\circ}C$ condition for three minutes using mixed solution of ethanol (95 %) and perchloric (70 %) acid with volume ratio of 4:1. Afterward, the first step surface modification was performed using sulfuric acid as an electrolyte where the electrolyte concentration was maintained at 10 vol.% by using a jacketed beaker. For anode, 5083 aluminum alloy with thickness of 5 mm and size of $2cm{\times}2cm$ was used, while platinum electrode was used for cathode. The distance between the two was maintained at 3 cm. Afterward, the irregular oxide film that was created in the first step surface modification was removed. For the second step surface modification process (identical to the step 1), etching was performed using mixture of chromic acid (1.8 wt.%) and phosphoric acid (6 wt.%) at $60^{\circ}C$ temperature for 30 minutes. Anodic polarization test was performed at scan rate of 2 mV/s up to +3.0 V vs open circuit potential in natural seawater. Surface morphology was compared using 3D analysis microscope to observe the damage behavior. As a result, the case of surface modification presented a significantly lower corrosion current density than that without modification, indicating excellent corrosion resistance.

• 대한전자공학회논문지
• /
• 제15권2호
• /
• pp.15-18
• /
• 1978

입력임피던스를 크게 하기 위하여 널리 사용되는 접힌 안테나의 임피이던스 변환비와 견환비에 따른 입력어드미턴스의 변화모양을 Moment법에 의하여 계산했다. 계산결과는 Guertler의 공식에 의한 것과 비교하여 이론적타당성을 확인한다. 절힌 안테나의 입력콘덕턴스는 공진주파수보다 다소 낮은 고파수에서 최대로 되고 써셉턴스는 주기적 성질을 가져서 안테나 두 소자의 굵기가 매우 다르지 않을 때는 몇 경의 주파수에서 0으로 된다. 또한 안테나 두 소자의 굴기차가 심할 수록 입력어드미턴스의 주파수에 대한 변화가 완만하여 좋은 주파수특성을 갖는다.