• International Journal of Safety
• /
• v.8 no.1
• /
• pp.14-17
• /
• 2009

The $Co^{60}$ $\gamma$-ray irradiation effects on the electrical and thermal characteristics of low density polyethylene crosslinked by Dicumyl peroxide (DCP) were investigated. We experimented on electrical properties as following; electrical tree inception and growing type for applying AC step voltage, AC breakdown strength, volume resistivity with increasing dosage. Also, chemical analyses were performed TGA, gel fraction. These electrical properties changed depending upon its crosslinking degree and byproducts from crosslinking reactions. Crosslinking reactions were considered causing by $\gamma$-ray irradiation and DCP had contained in low density polyethylene.

• Journal of Hydrogen and New Energy
• /
• v.17 no.1
• /
• pp.109-116
• /
• 2006

The heat treatment characteristics of natural talc sample was investigated in diverse analytical view point. The mass decrease comes to heat treatment was resulted by the continuous and the discontinuous process and the obtained result show very similar two step profiles with 8.9 % mass decrease. The dehydroxylation of -OH groups contained talc crystal was analyzed by spectroscopic method and the crystallographic variations was also observed after heat treatment. According to XPS result, the magnesium hydroxide($Mg(OH)_2$) of untreated talc powder changed to magnesium oxides(MgO) after heat treatment.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.635-638
• /
• 2003

For the acute assessment on biological toxicity of wastewater, surface plasmon resonance(SPR) based cell viability detection was performed using gold surface-confined cell as a result of adhesion-modifying chemicals. Escherichia coli O157:H7 (E. coli O157:H7) was investigated after exposure to EDTA. Cells were immobilized on gold coated slide glass for SPR analysis by the method of cross-linking carboxyl group on the bacterial surface with amine group of poly-L-lysine that had been coupled to the gold surface modified by a self-assembled monolayer of 11-mercaptounde canoic acid (11-(MUA)). Reflective intensity of each flow step was changed with respect to confect of ethylenediaminetetraacetic acid (EDTA) disodium salt and phosphate-buffered saline (PBS) solution. The proposed detection technique can be used for biological toxicity test.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.601-606
• /
• 2004

Vibration spectrums of the test loop according to flow conditions were analyzed in order to identify the sources of vibration at peak frequencies. While a flow condition of the sweep test was changed by varying pump rotational speed from 450 rpm to 1500 rpm by the step 150 rpm, midspan acceleration of the test section in width-direction and dynamic pressure perturbation in the test section were measured. Other sources of vibration due to the flow structure interactions, such as acoustic resonance, blade pulsing frequency and bellows wrinkles, were investigated. Pressure perturbation in the section and acoustic resonance due to branch pipe give major effects to the vibration of the test section in high frequency range of 1.5 kHz to 2.8 kHz.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.5
• /
• pp.119-126
• /
• 2000

Recently, according to the various taste of consumers, the design of a product is changed variously and complicatedly. The complicated product is not usually constructed with one path but multi-path. By the way, in machining, higher precision and the reduction of leading and machining time is required. But, for the multi-patch sculptured surface, the amount of machining data becomes large. This means the increase of leading and machining time. In this study, the tool path generation method with reparameterization is proposed for multi-patch sculptured surface and variable step size using NURBS is used to satisfy the precision and to reduce leading and machining time.

• Journal of Korean Society for Quality Management
• /
• v.23 no.4
• /
• pp.180-189
• /
• 1995

Today, as globalization continues and international trading blocks are formed, world markets are intensely competitive and abound in product variety, volume, complexity and environmental management. Specifically, green consumer's needs and expectations are changing and diversifying, resulting in a changed global environment for industry. Due to these changes, domestic companies are striving to achieve the Environmental Management System (ISO 14000) certification. This is considered a basis step in meeting the guiding principle and practice of ISO/TC 207/SC 3 resolution. In this paper, we will present three type(I, II, III) of Environmental Labelling programs to build a model for environmental management system by analysing practitioner and stakeholder. After companies establish an ISO 9000 quality system these companies should focus on improve toward their own Environmental Labelling program and continue to build ISO 14000.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2001.11a
• /
• pp.97-101
• /
• 2001

The fusion between viral envelope and target cell membrane is a central step of viral infection, and the fusion proteins located at viral envelope mediate such process. Gp41 of HIV is one of the fusion proteins whose structure and mechanism of membrane fusion had been extensively studied. Functionally important motives of gp41 are the N-terminus fusion peptide, the coiled-coil and the membrane proximal C-peptide regions. The role of these regions during the fusion process had been thoroughly examined. Specially, insertion of the fusion peptide into membrane and conformational change of the coiled-coil and C-peptide regions are assumed to be critical for the fusion mechanism. In addition, the coiled-coil region has been shown to interact with membrane, and the C-peptide region regulates the interaction in a dose dependent manner. Furthermore, fusion defective mutations of the coiled-coil region dramatically changed its binding affinity to membrane. These results suggested that the membrane binding property of the coiled-coil region is important for the fusion activity of gp41, and such property could be modulated by the interaction with the C-peptide region.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.10 no.2
• /
• pp.49-60
• /
• 2010

The production process of construction industry is different from thing of the general manufacturing, likewise various participants make temporary teamwork for success of the project through sharing of information. But the each role of participants is individually changed to step in construction process stage and moreover it has complicated, entangled interests. The Construction Management was inducted for the effective management and operation of construction project. The Key of the Construction Management success depends on the cooperative relationship relation to major participants. The domestic construction system is difficult with many trial and errors for the frequent plan change. As the building are more bigger and complicated, Building Information Modeling is demanded design and maintenance. This evaluation was done by the trust on the system as well as Construction Management. And then it applies the BIM it analyzes the example of construcrion project.

• Journal of the Korean Society of Safety
• /
• v.14 no.4
• /
• pp.148-157
• /
• 1999

Dynamic structural behavior in long span bridges, especially cable structures, is very sophisticated due to their flexibility and structural members are sequentially erected in each construction step. In this study, the consistent mass matrix for dynamic analysis is formulated and computational program considering construction sequences is developed where structural members can be builded or removed by command language and automatically reanalyzed in the moment when structural system is changed. The dynamic analysis, i.e. eigenvalue and time series analysis and the geometrically nonlinear analysis considering construction sequence are conducted to the Namhae Bridge. The analytical results are satisfactory compared with measuring values and the developed computational program can successfully be applied to design and safety check.

• Journal of computational fluids engineering
• /
• v.10 no.1
• /
• pp.31-38
• /
• 2005

Three-dimensional flow over the sand dunes have been studied numerically by using Large-Eddy Simulation (LES) method. In the direction of initial flow and span direction cyclic boundary conditions are imposed for velocity and pressure. The movement of the sand dune which is formed by converging wind direction has been investigated. The numerical method employed in this study can be divided into three parts: (i) calculation of the air flow over the sand dune using standard MAC method with a generalized coordinate system; (ii) estimation of the sand transfer caused by the flow through the friction; (iii) determination of the shape of the sand surface. Since the computational area has been changed due to step (iii), (i)-(iii) are repeated. The simulated dune, which has initially elliptic cross section, extends at the converging direction, which is known as linear dunes.