• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.309-313
• /
• 2004

This paper presents an algorithm of detecting changed intervals with step-type shape in motor's speed response data. The proposed method is composed of 4 parts such as noise filtering, decision making of reference value's change, finding entrance point of steady state and detecting changed intervals. According to simulation results for three cases, we see that changed intervals can be found well.

• Smart Structures and Systems
• /
• v.30 no.2
• /
• pp.173-181
• /
• 2022

The current paper presents a technique to detect crack in non-uniform cantilever-type pipe beams, that have step changes in the properties of their cross sections, restrained by a translational and rotational spring with a tip mass at the free end. An equation for estimating the natural frequencies for the non-uniform beams is derived using the boundary and continuity conditions, and an equivalent bending stiffness for cracked beam is applied to calculate the natural frequencies of the cracked beam. An experimental study for a step-changed non-uniform cantilever-type pipe beam restrained by bolts with a tip mass is carried out to verify the proposed method. The translational and rotational spring constants are updated using the neural network technique to the results of the experiment for intact case in order to establish a baseline model for the subsequent crack detection. Then, several numerical simulations for the specimen are carried out using the derived equation for estimating the natural frequencies of the cracked beam to construct a set of training patterns of a neural network. The crack locations and sizes are identified using the trained neural network for the 5 damage cases. It is found that the crack locations and sizes are reasonably well estimated from a practical point of view. And it is considered that the usefulness of the proposed method for structural health monitoring of the step-changed non-uniform cantilever-type pipe beam-like structures elastically restrained in the ground and have a tip mass at the free end could be verified.

• PNF and Movement
• /
• v.8 no.2
• /
• pp.9-15
• /
• 2010

Purpose : This study aimed to investigate the effect of differing ground contact conditions on the eletromyographic(EMG) activity in rectus femoris, biceps femoris, tibialis anterior, gastrocnemius medialis during step-up activity in patients with hemiparesis. Methods : 10 hemiparetic patients performed step-up activity on three different ground contact conditions: entire ground contact, 2/3 ground contact, 1/3 groud contact. Result : The EMG activities of gastrocnemius medialis significantly changed on 1/3 ground contact(p<.05). However, no significant changed rectus femoris, biceps femoris, tibialis anterior between three differing ground contact conditions (p>.05). Conclusion : This study provides that EMG activities of gastrocnemius medialis significantly changed on different ground contacts. Therefore, this method can be used to strengthen the gastrocnemius medialis.

• The KIPS Transactions:PartB
• /
• v.14B no.5
• /
• pp.361-368
• /
• 2007

In this paper, we propose a smoke detection method which is based on block-wise difference of image frames in video. Our proposed method is composed of three steps which are (a) the detection step of the changed regions against the background, (b) the background update step, and (c) the smoke determination step from the changed regions. We first construct the block mean Image of frames in video. And to extract the changed regions against the background, we use a block-wise difference between background's block mean image and a current input frame's block mean image. After applying projections in block-based difference images, we can determine the changed regions as rectangles using projections of difference images. we propose a update scheme of background's block mean image using the projections. We decide the smoke region using the femoral statistics of the central position and YUV color in the changed region.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1649-1654
• /
• 2014

This paper proposes the method which is improved a performance of PO MPPT control in PV system. The PO method is continually changed voltage toward direction that increases power, and if output power is decreased by changing voltage, a power of the conventional PO method is changed to a power before one step. These operations causes reduce of MPPT performance. Therefore, this paper proposes the MPPT method that can be improved the performance of the conventional PO method. When voltage is changed to direction of reducing power, the method proposed in this paper is changed to the voltage the opposite direction of twice step size. The MPPT performance of proposed method in this paper is compared with conventional PO method and proved the validity of this paper using these results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.12
• /
• pp.40-46
• /
• 2015

This paper proposes the method which is improved a performance of PO MPPT control in PV system. The PO method is continually changed voltage toward direction that increases power, and if output power is decreased by changing voltage, a power of the conventional PO method is changed to a power before one step. These operations causes reduce of MPPT performance. Therefore, this paper proposes the MPPT method that can be improved the performance of the conventional PO method. When voltage is changed to direction of reducing power, the method proposed in this paper is changed to the voltage the opposite direction of twice step size. The MPPT performance of proposed method in this paper is compared with conventional PO method and proved the validity of this paper using these results.

• The KIPS Transactions:PartB
• /
• v.16B no.4
• /
• pp.271-280
• /
• 2009

In this paper, we propose a smoke detection method using region growing method in outdoor video sequences. Our proposed method is composed of three steps; the initial change area detection step, the boundary finding and expanding step, and the smoke classification step. In the first step, we use a background subtraction to detect changed areas in the current input frame against the background image. In difference images of the background subtraction, we calculate a binary image using a threshold value and apply morphology operations to the binary image to remove noises. In the second step, we find boundaries of the changed areas using labeling algorithm and expand the boundaries to their neighbors using the region growing algorithm. In the final step, ellipses of the boundaries are estimated using moments. We classify whether the boundary is smoke by using the temporal information.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.132-140
• /
• 2000

In conventional drilling, burr geometry can be changed according to the variation of drill geometry like point angle, rake angle. Step drilling is proposed to minimize the burr formation in drilling operation. The burr formed in first cutting can be removed in second cutting by the edge in step. The burr formed in second cutting by the edge in step can be minimized according to the change of geometry like, step angle and depth. The mechanism in step drilling is analyzed. Some step drills are applied to drilling the input shaft which is used for vehicle steering. To measure the burr formed in drilling, laser and height gage are used.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.324-328
• /
• 2012

A recovered jitter of CDR(Clock and Data Recovery) Circuit based on Dual-loop DLL(Delay Locked Loop) for data recovery in high speed serial data communication is changed by depending on the input data and reference clock frequency. In this paper, 2-step DPC which has constant jitter performance for wide-range input frequency is proposed. The designed prototype 2-step CDR using proposed 2-step DPC has operation frequency between 200Mbps and 4Gbps. Average delay step of 2-step DPC is 10ps. Designed CDR circuit was tested with 0.18um CMOS process.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.59-65
• /
• 1999

This study is to analyze turbulent flow over a backward-facing step in a rectangular duct. The side wall effects on the internal flow were determined by varying the aspect ratio(defined as the step span-to-height ratio) from 1 to 20. In the flow behind a backward-facing step, separation, recirculation and redeveloping is occurred frequently. These phenomena appear in a particular variation by varying the aspect ratio. The results show that the aspect ratio has an influence on the velocity and reattachment length. When the AR is increased, the reattachment length is increased. For 6 over aspect ration, the rate of increase is decreased. The length of recirculation in the upper corner is increased, as the increase of aspect ration. It's width is not changed in the variation of aspect ration. The transverse, streamwise and spanwise velocities were decreased along the flow down stream of the step.