• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.142-155
• /
• 2019

This study was conducted with the aim of developing a system to collect taxi GPS probe information to prevent link defects and to improve the accuracy of the standard link-based travel speed by determining when to go into and come out the link. For this purpose, a framework and algorithm consisting of a five-step process for standard link-based map matching and individual vehicle travel speed are presented and used it to calculate the average travel speed of the service link. Two on-site surveys of Teheran and Hakdong-ro were conducted to verify the results by the methods proposed in this paper. On the basis of the overall time of the field survey, the deviation in the travel speed was 0.2 km/h and 0.6 km/h, the accuracy was 99% and 96%, and the MAPE(Mean Absolute Percentage Error) was 1% and 4% in Teheran and Hakdong-ro, respectively. These results were more accurate thand those obtained using conventional methodologies without standard links.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.183-190
• /
• 2009

In order to improve continuous success and stabilization of high-speed rail in the future, Using Frequency of high-speed rail should be enhanced by improving satisfaction of high-speed rail passenger. High-speed rail is needed to hold the priority in competition means by comparing the traits of service of domestic air lines. This study utilizes structural equation modeling to develop model for estimating factors influencing to service through conducting survey questionnaire. It also uses reliability analysis, correlation analysis, factor analysis to examine the rationalization of items and to establish hypothesis of this research. The results show that KTX contains 'inner service' item that is considered to be ameliorated and that domestic airline present low performance of 'outer service' item. In other words, moving section which partly is under a limited condition is needed to be improved. In addition, access to airport and transfer to other transportations have to be improved as they show the lowest satisfaction.

• Journal of the Ergonomics Society of Korea
• /
• v.19 no.1
• /
• pp.91-100
• /
• 2000

In this paper the intent recognition system which recognizes the human's head movements as a simple non-verbal intent representation is presented. The system recognizes five basic intent representations. i.e., strong/weak affirmation. strong/weak negation, and ambiguity by image processing of nodding or shaking movements of head. The vision system for tracking the head movements is composed of CCD camera, image processing board and personal computer. The modified template matching method which replaces the reference image with the searched target image in the previous step is used for the robust tracking of the head movements. For the improvement of the processing speed, the searching is performed in the pyramid representation of the original image. By inspecting the variance of the head movement trajectories. we can recognizes the two basic intent representations - affirmation and negation. Also, by focusing the speed of the head movements, we can see the possibility which recognizes the strength of the intent representation.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.278-282
• /
• 2003

This paper presents TPS(Train Performance Simulation) which identified the condition of train operationing in short time. Using the program, the location of train, maximum current, metering power and regenerating of train, could be identified. This is an important part for Power Simulation. It is supposed that the grade, the curve, the limit speed and the current speed be constant within the time step in the conventional papers. In addition, the errors of the grade and the curve in each station interval are neglected. This paper will introduce improvement method the problem of TPS.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.2
• /
• pp.125-130
• /
• 2016

The proposal of this study is a fast version of the conventional extreme learning machine (ELM), called pseudoinverse matrix decomposition based incremental ELM (PDI-ELM). One of the main problems in ELM is to determine the number of hidden nodes. In this study, the number of hidden nodes is automatically determined. The proposed model is an incremental version of ELM which adds neurons with the goal of minimization the error of the ELM network. To speed up the model the information of pseudoinverse from previous step is taken into account in the current iteration. To show the ability of the PDI-ELM, it is applied to few benchmark classification datasets in the University of California Irvine (UCI) repository. Compared to ELM learner and two other versions of incremental ELM, the proposed PDI-ELM is faster.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.1
• /
• pp.50-55
• /
• 2004

In this study, slit-tones by plane impinging jet are investigated experimentally over the whole subsonic flow range, especially at low speeds, in order to obtain the instability behaviour of impinging plane jet. Slit-tones are generated at low speeds associated with laminar shear layer instability as well as at high speeds associated with turbulent instability. Most of low-speed slit-tones are induced by symmetric mode instability unless the slit is not so wide, in which case antisymmetric modes are induced like edge-tones. It is found that the frequencies at low speeds ate controled by the unstable condition of the vortex at the nozzle exit and its pairings by which the frequencies are decreased by half. In the case of symmetric modes related with low-speed slit-tones, frequencies lower than those associated with one-step pairings are not found.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.2
• /
• pp.167-173
• /
• 2011

This paper presents a method for the development of the impedance locus to test the dynamic characteristics of protective relays. Specifically, using the proposed method, the impedance locus can comprise three impedance points, and the speed of impedance trajectory can be adjusted by frequency deviation. This paper is divided into two main sections. The first section deals with the configuration of impedance locus with voltage magnitude, total impedance magnitude, and impedance angle. The second section discusses the control of the locus speed with the means of the deviation between two frequencies. The proposed method is applied to two machine equivalent systems with offline simulation (i.e., PSCAD) and real-time simulation (i.e., real-time simulation environment) to demonstrate its effectiveness.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.461-466
• /
• 2005

This paper presents a new speed control scheme of the spindle induction motor (IM) using fuzzy-logic control in fold weakening region. The implementation of the proposed FLC-based spindle IM are investigated and compared to those obtained from the conventional PI controller based drive system, we have confirmed good simulation and experimental results at different dynamic operating conditions such as sudden change in command speed, step change, etc.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.135-138
• /
• 2009

In this paper, a novel maximum power point tracking (MPPT) for a PMSG-based variable speed wind power system is proposed using the fuzzy logic algorithm. The control algorithm is developed based on the normal hill climb searching (HCS) method, commonly used in wind energy conversion systems (WECS). The inputs of fuzzy-based controller are the derivations of DC output power and the step size of DC/DC converter duty cycles. The main advantages of the proposed MPPT method are no need to measure the wind velocity and the generator rotational speed. As such, the control algorithm is independent of turbine characteristics, achieving the fast dynamic responses with non-linear fuzzy systems. The effectiveness of the proposed MPPT strategy has been verified through the simulated results.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.4
• /
• pp.515-520
• /
• 2009

According to the operating characteristics of pump applications, they should exhibit high efficiency and energy saving capabilities throughout the whole operating process. A novel efficiency optimization control strategy is presented here to meet the high efficiency demand of a variable speed Permanent Magnet Synchronous Motor (PMSM). The core of this strategy is the excellent integration of mended maximum torque to the current control algorithm, based on the losses model during the dynamic and the grade search method with changed step by fuzzy logic during the steady. The performance experiments for the control system of a variable speed high efficiency PMSM have been completed. The test results verified that the system can reliably operate with a different control strategy during dynamic and steady operation, and the system exhibits better performance when using the efficiency-optimization control.