• Journal of Biosystems Engineering
• /
• 제18권4호
• /
• pp.305-316
• /
• 1993

Fuel efficiency in tractor operations dep6nds on the selection of transmission gears and upon the engine being operated at or near maximum torque much of time. The objective of this study was to develop automatic control systems for tractor transmission ratio and governor setting so that the engine is operated at or near maximum torque as much of time as possible. An indoor test unit, which can be used to simulate tractor operation, was built in order to investigate the system design parameters and test the performance of the control system designed. The test-unit consists of engine, gear-type transmission, dynamometer, and control systems for transmission ratio and engine speed. Governor setting lever was controlled by a step motor, and the clutch and transmission levers were controlled by hydraulic cylinders and solenoid valves. The control systems showed good time responses which are assumed to be suitable for optimal tractor operation. The time required for shifting gears from clutch disengagement to engagement was about 1 second, which is almost the same as that for manual shift. And the settling time for engine speed control system was about 5 to 6 seconds.

• 한국소음진동공학회논문집
• /
• 제17권12호
• /
• pp.1152-1160
• /
• 2007

이 논문에서는 선형 유도 모터로 추진되는 자기부상 열차 시스템에서 열차의 속도에 따라서 추진 시스템으로부터 발생하는 간섭력의 부상 시스템에 대한 영향을 최소화하기 위한 적분형 sliding mode 부상제어기의 설계에 대해서 다룬다. 제어기 구조는 적분형 제어기와 sliding mode 제어기로 구성된다. 적분형 제어기는 정적 외란에 대해서 정상상태 오차가 영에 도달하는 것을 보장하고 sliding mode 제어기는 수학적 모델이 본질적으로 갖고 있는 불확실성에 대한 강건성을 보장 한다 sliding mode 제어기의 chattering 문제를 해결하기 위해서 연속 함수를 도입한다. 선형 유도모터에 의한 간섭력은 실험 데이터의 curve fitting에 의한 수학적 모델링을 통하여 수식화 한다. 컴퓨터 모의시험을 통해서 설계돈 적분형 sliding mode 제어기의 효율성을 보인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.301-306
• /
• 2003

PID controller is applied mostly to two-order system. In third-order or higher- system, it's impossible to get high response quality because of having more zero point than the number of zero point being in the PID controller. To solve those, Jung & Dorf suggested a new type of PIDA controller and solved problen of a third-order system. But, as the result of getting step response using PIDA controller, rising time is very quickly but wide overshoot is happened. Beside designing PIDA controller with using CDM(Coefficient Diagram Method) suggested by shunji manabe. But, In Performance standard, CDM decreases overshoot to desired but rising time is very slow. Therefore this paper suggest a PD-PIDA controller for low overshoot with PD type Pre-compensator. This paper applied designed PD-PIDA controller to position control of 3-Phase induction motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.588-590
• /
• 1999

In this paper the design method of a fuzzy logic controller with a genetic algorithm is proposed. Fuzzy logic controller is based on linguistic descriptions(in the form of fuzzy IF-THEN rules) from human experts. The auto-tuning method is presented to automatically improve the output performance of controller utilizing the genetic algorithm. The GA algorithm estimates automatically the optimal values of scaling factors and membership function parameters of fuzzy control rules. Controllers are applied to the processes with time-delay and the DC servo motor. Computer simulations are conducted at the step input and the output performances are evaluated in the ITAE.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1-6
• /
• 1991

This paper is concerned with the design of a robust tracking controller using a state observer on a robotic manipulator under the disturbance. The controller is designed to follow a step or ramp reference input without steady state error in the presence of a disturbance and a system parameter variation. In most cases, since all the state vectors are not measured, unmeasurable state vectors must be estimated or reconstructed. A reduced order observer is proposed to estimate unmeasurable state vectors of the non-linear system. Some problems are caused by the Coulomb friction, the disturbance, and the spring effect of a link between the drive motor and the manipulator arm. The state variables, directly measured and estimated by the reduced order observer, are fed back to the controller. When the robot system exhibits the 'limit cycle, the feedback gains initially obtained by optimal control theory are changed. As a result, the limit cycle is eliminated by the new controller gains,

• 한국정보시스템학회지:정보시스템연구
• /
• 제17권1호
• /
• pp.155-171
• /
• 2008

This thesis proposed a method that connecting step motor to image send board which can acquire image to move and remote controlling via streaming image board of PDA(personal digital assistant) based on embedded Linux which is using wireless network There are three embedded Linux system to embody movable image send board. First, though the wireless network a signal of PDA is transmitted to the board which has embedded Linux and a system which is controlled by the expansion I/O port of the board. Second, it's a system streaming realtime image at a PDA which has embedded Linux. The last is a system which controls a process of image board using TCP/IP communication and image send board at PC. These are the system which can use industrial settings and homes. It can also make use of an embodiment method about travelling image robot.

• Annals of Clinical Neurophysiology
• /
• 제15권2호
• /
• pp.37-41
• /
• 2013

Saccades are rapid eye movements that shift the line of sight between successive points of fixation. The cerebellum calibrates saccadic amplitude (dorsal vermis and fastigial nucleus) and the saccadic pulse-step match (flocculus) for optimal visuo-ocular motor behavior. Based on electrophysiology and the pharmacological inactivation studies, early activity in one fastigial nucleus could be important for accelerating the eyes at the beginning of a saccade, and the later activity in the other fastigial nucleus could be critical for stopping the eye on target, which is controlled by inhibitory projection from the dorsal vermis. The cerebellum could monitor a corollary discharge of the saccadic command and terminate the eye movement when it is calculated to be on target. The fastigial nucleus and dorsal vermis also participate in the adaptive control of saccadic accuracy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.760-762
• /
• 2000

Hybrid type LPM can be widely applied in the precise position controlled devic because precise linear motion can be directly obtained by the simple control circuit without backlash in the rotary-type stepping motor. Also, LPM can increase the Position resolution, which was limited by mechanical manufacturing limit and characteristic of magnetic material. using micro-step drive method to decrease the noise and vibration further. Especially, Double-side LPM may be replaced the solenoid as the valve driving device without difficulty and give full play to control the valve accurately. Hence, In this paper, magnetic circuit of double-side LPM was confirmed and static thrust force curve according to the relative displacement between stator and mover, was analyzed by the two dimensional finite element method. From this results, we can suppose the excitation current to be controlled optimally.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.31-36
• /
• 2009

There have been many solar tracking systems developed for the high accuracy in solar tracking. One of the key components of any motion control system is software. LabVIEW offers an ideal combination of flexibility, ease-of-use and well-integration with other I/O pieces for developing solar tracking system. Real-time solar positions which vary with GPS's data are used simultaneously to control the solar tracker by a chain of operating modes between the open and closed loops. This paper introduces a step by step procedure for the fabrication and performance assessment of a precision solar tracking system. The system developed in this study consists of motion controllers, motor drives, step-motors, feedback devices and application. CRD sensors are applied for the solar tracking system which play a primary role in poor conditions for tracking due to a gear backlash and a strong wind. Mini-dish was used as a concentrator for collecting sun light. The solar position data, in terms of azimuth and elevation, sunrise and sunset times was compared with those of KASI(Korea Astronomy & Space Science Institute). The results presented in this paper demonstrate the accuracy of the present system in solar tracking and utilization.

• 한국정보통신학회논문지
• /
• 제1권2호
• /
• pp.209-220
• /
• 1997

직접위성방송(DBS)은 해상에까지 광범위한 방송서비스를 제공할 수 있는 매우 유용한 매체이다. 그러나 해상에서의 DBS 수신장치는 선박의 운항이나 동요의 상태에 관계없이 안테나가 위성을 계속 추적해야 하는 복잡한 제어장치를 필요로 한다. 본 연구는 한반도 연 근해를 항해하는 선박에서 Koreasat의 DBS를 수신할 수 있는 장치의 개발이 목표였으며, 특히 소형선박에 쉽게 탑재하고 사용할 수 있도록 다른 항법장비와 연계됨이 없이 장치의 독립적인 운용형태로 설계하였고 소형, 경량, 저가격화에 중점을 두었다. 그러므로 한반도 연·근해에서 koreasat의 탐색과 추적조건을 분석하고 이에 적합한 Az/El 2축 마운트를 설계하여 제작하였으며, 스텝트랙(step track) 방식에 의한 추적과 각속도 센서를 이용한 마운트의 동요보정 기능을 연구하였다. 실험을 위하여 장치를 탑재할 수 있는 선박운동 시뮬레이터를 제작하여 목표치의 동요를 구현하고, 추적과 동요보정에 따른 수신상태를 측정, 분석하면서 실험적으로 최적의 알고리즘을 구현하였다.