• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.4
• /
• pp.11-23
• /
• 2011

Mountain streams, which are major components of an entire river network, play an important role as the source of water, sediment, coarse and fine organic matter, and nutrients for lowland rivers. Therefore, dynamics and downstream linkages of each compartment of the mountain stream can be essential for watershed management in catchment scale. The dynamics and downstream linkages are understood as a development of step-pool sequences along a river course. Recently, stream restoration after flooding event often employ the development of step-pool sequences in the world. In this paper, we 1) examined the geomorphic characteristics and the role of step-pool sequences in steep mountain streams by reviewing the results of past studies, and 2) introduced the case studies of stream restoration using step-pool sequences, and finally 3) addressed design methods considering geometry and stability of artificial step-pool sequences for stream restoration. Step-pool sequences play an important role not only as roughness with energy dissipation but also as heterogeneity of stream feature for aquatic habitat. Step-pool sequences, even if they are constructed artificially along a stream, may be effective for small stream restoration considering eco-friendly torrent controls. So far the artificial step-pool sequences were employed for mountainous streams, but those would be applied to urban stream.

• Korean Journal of Poultry Science
• /
• v.21 no.4
• /
• pp.257-266
• /
• 1994

Three protein feeding systems for egg-type pullets involving conventional step-down protein 18-15-12%), step-up protein(12-15-18%) and single-stage low protein (13-13-13%) with an iso-energy level of 2,900 ME kcal /kg were compared to examine the effect on pullet growth and subsequent laying performance. During the growing period, pullets subjected to the step-up and single-stage low protein feeding systems were lighter in body weight and consumed less feed and netabolizable energy than those on the conventional step-down protein feeding system(P<0.05). 3ut the pullets on the step-up protein diet consumed more protein, and those on the single-stage low protein diet consumed less protein than those on the step-down protein diet(P<0.05). Also, he feed cost was less in pullets on the single-stage low protein diet than in those on the other systems(P<0.05). During the laying period, sexual maturity was later in hens reared on the step-up and single-stage low protein diets than in those on the step-down protein diet(P<0.05), however, average hen-day egg production and egg weight were not significantly affected by the protein feeding systems in the growing period. Daily feed intake and feed required per egg were significantly reduced in hens on the single-stage low protein diet compared to those on conventional protein feeding system(P<0.05). It was concluded that the 13% single-stage low protein feeding system produced smaller pullets with less feed, energy, protein, and feed cost during the growing period, and hens reared on that system consumed less feed during the laying period without any impairment of production compared to the conventional rearing system.

• The Journal of the Korean dental association
• /
• v.57 no.8
• /
• pp.437-447
• /
• 2019

Purpose: In recent years, efforts to improve the dental curriculum in South Korea have focused on a shift to outcome-based dental education based on core competencies in dentistry. So far, the field has seen various studies on the development of competencies, performance evaluation, and the importance of outcome-based education, but few studies have documented the development of such an education model. Therefore, this study develops an OBE curriculum for dentistry education and describes the development procedures and then finally this study intends to share our experience to other dental schools. Methods: This study introduces the development procedure and details of an outcome-based education model for dental education and presents the five stages of an outcome-based education model. In this study, 3 educational experts and 2 dental professor composed the TFT and developed the research method according to the ADDIE model. Step 1 is to conduct quantitative / qualitative research analysis through some survey and interview, Step 2 is to do a survey to revise competency, Step 3 is to develop a materials through consensus and participation of our professors of the dental school, Step 4 is to do some workshops, Step 5 is to prepare and conduct a outcome evaluation. Results: Step 1 is a required process for developing an educational model: the Job Analysis & Need Analysis stage. Step 2 is the Development of Outcome and Competency stage, which involves revising the competencies that are the basis of the curriculum. Step 3 is developing competency descriptions, competency levels, and evaluation criteria?the Development of Outcomes and Evaluation Standards. Step 4 is the Development of Milestones for Curriculum and Instructional Strategy, which examines the curriculum's problems and analyzes the improvements of each course. Step 5 is the Evaluating Outcomes stage, conducted based on the competencies specified by the target dental school. Conclustion: The model presented here can serve as a foundation for outcome-based education in other dental schools.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.4
• /
• pp.35-47
• /
• 2020

Step-drawdown test is one of the widely-used aquifer test methods to evaluate aquifer and well losses. Various approaches have been suggested to estimate well losses using the step-drawdown test data but the uncertainties associated with data interpretation and analysis still exist. In this study, we applied three different step-drawdown test analysis methods -Jacob (1947), Labadie and Helweg (1975), Gupta (1989)- to the step-drawdown test data in Seobu-myeon, Hongseong-gun, South Korea and estimated aquifer and well losses. Comparisons of different step-drawdown test analysis methods revealed that the estimated well losses showed different values depending on the applied methods and these variations are likely to be related to the limitation of the assumptions for each analysis method. Based on the detailed analysis of time-drawdown data, we performed step-drawdown test analysis after removing outlier data during the initial stage of step drawdown test. The results showed that the application of the revised time-drawdown data could substantially decrease the error of the analysis as well as the variations in the estimated well losses from different analysis methods.

• Clinical and Experimental Reproductive Medicine
• /
• v.19 no.2
• /
• pp.143-152
• /
• 1992

The present experiments were focussed to modify a short slow-cooling protocol used for freezing of early stage embryo(Testart et al., 1986) and also to apply the modified method for the cryopreservation of hamster oocytes with Zona or without. The protocol was modified by changing the 4-step equilibration into 1-step and the 1-step thawing into 2-step. The oocytes were added in 1.5M PROH and 0.1M Sucrose, seeded at $-7^{\circ}C$, slow cooled($0.3^{\circ}C$/min) to $-30^{\circ}C$ before plunging to $-196^{\circ}C$. The oocytes were thawed at $23-25^{\circ}C$ air(20sec/150sec) and/or 33-35 water(10sec). The survival of the frozen-thawed oocytes was determined by morphologic criteria and their fertilizing ability was also estimated by Sperm Penetration Assay(SPA) system(Chang et al, 1990) using fertile men semen sample. One-step equilibration showed slightly higher survival rate(83.9% vs. 71.0%) and fertilization rate(83.9% vs. 71.0%) compared with four-step(p>0.05). And two-step thawing(air & water exposing) of oocytes frozen after 1-step equilibration showed significantly higher survival rate(96.3%) than one-step thawing at air(85.2%) or water(65.0%) only(p<0.05). Therefore, by the modified method(l-step equilibration & 2-step thawing), Zona-intact(ZI) and Zona-free(ZF) oocytes were frozen and thawed. ZI-oocytes showed significantly higher survival rate(95.4%, 308/323 vs. 67.6%, 240/355) than ZF-oocytes(P<0.01). But the survival of ZF-oocytes was as high as ZI-oocytes in fourteen of twenty-four replicates. ZI-oocytes was also significantly higher fertilization rate($92.4{\pm}8.9%$ vs. $63.7{\pm}18.5%$) and higher mean number of penetrated sperm($6.2{\pm}4.2$ vs. $3.9{\\pm}3.3$) than ZF-oocytes, but not higher than control(fresh oocytes;$99.3{\pm}2.4%$, $8.4{\pm}4.2$)(P<0.001). Conclusively, this modified method will contribute to freeze effectively the hamster oocytes for simplifing of the logical consideration of performing SPA and also to freeze the human and other animal oocytes.

• Development and Reproduction
• /
• v.11 no.1
• /
• pp.31-41
• /
• 2007

The spermiogenesis of Crocidura shantungensis were studied by electron microscope. All process of spermiogenesis was divided into 11 phases 15 steps, based on the morphological features of the nucleus and cell organelles in cytoplasm of spermatids. The spermatids in Golgi and cap phases were a spherical shape. On the other hand, at the early acrosomal phase they changed into an oval shape, and the tail was created in this phase. In maturation phase, the shapes of spermatid head were thin and longish. Until step 7 the direction of spermatids head turned toward the lumen of the seminiferous tubule. From step 8 to step 15 their heads turned toward the basal lamina. In step 12, the nucleus and acrosome shown maximal elongation. From Step 13 the nucleus of spermatids became flat, simultaneously with flat expansion of the acrosome expanded, and the visible whole lengths of spermatids were tend to be shorten. Spermatid heading which arrived to step 14 was taken the final shape. The nucleus was doing the wedge shape, and the nuclear chromatins condensed completely and homogenized. In the spermiation phase, the spermatids were gradually disconnected from the cytoplasm of the Sertoli cell. In this phase, the acrosome of the spermatids were fully shorten and flat, and the spermatozoa completed the process of heading and the tailing. Considering all the results, the spermiogenesis may be useful information to analyze the differentiation of spermatogenic cells.

• Journal of Korea Water Resources Association
• /
• v.44 no.4
• /
• pp.275-283
• /
• 2011

A local or site-specific water temperature is downscaled from the nation-wide air temperature that represents simulation by General Circulation Model (GCM). Both two-step and one-step method are tested and compared in three sites: Masan Bay, Lake Sihwa, and Nakdong River Estuary. Two-step method uses a linear regression model as the first step that converts nation-wide air temperature into local air temperature, and the corresponding coefficient of determination is in the range of 0.98~0.99. The second step that converts air temperature into water temperature uses a nonlinear curve, so called S-curve, and the corresponding root mean squared error (RMSE) is 2.07 for rising limb in Masan Bay, 1.93 for falling limb in Masan Bay, 2.59 for Lake Sihwa, and 1.58 for Nakdong River Estuary. In a similar way, one-step method is performed to directly convert nation-wade air temperature into local water temperature, and the corresponding RMSE is 2.28 for rising limb in Masan Bay, 1.89 for falling limb in Masan Bay, 2.55 for Lake Sihwa, and 1.52 for Nakdong River Estuary. Consequently both methods show a similar level of performance, and one-step method is recommendable in that it is simple and practical in relative terms.

• Korean Journal of Materials Research
• /
• v.4 no.4
• /
• pp.459-465
• /
• 1994

A-axis oriened YBCO thin flims were grown on $LaAIO_{3}$ single crystal substrate by off-axis rf magnetron sputtering method. We used two kinds of process to get a-axis oriented fi1ms;one-step process and two-step process. In one-step process, films are grown in single step in which substrate temperature( $T_s$) is in the range of $590^{\circ}C$ to $680^{\circ}C$. On the other hand, in two step process a-axis oriented thin film templates i f about 30nm thickness is deposited at low temperature first, and subsequently films are grown at elevated temperature to the final thickness of about 100nm. In the case of one step process($T_s$ ~)$600^{\circ}C$), prefered a-axis orientation is dominant and Cu-rich phases segregate at the surface. Segregations decrease and ($00 \ell$) peaks increase upon increasing $T_s$. The films prepared by two step method appeared to have strong(h00) peaks as the deposition rate increased. Microstructure shows pin holes resulted from mixed phases of a-axis and c-axis oriented films. In both cases of one step and two step process, as TS decreases, prepared films show stronger a-axis orientation. However electrical properties of the films are depressed with lower $T_c$ and wider $\Delta T$ as $T_s$ decreases.

• Food Science and Preservation
• /
• v.23 no.3
• /
• pp.301-309
• /
• 2016

The objective of this study was to investigate physicochemical and antioxidant characteristics of immature flat persimmon during 7 heat treatment aging steps. The pH decreased, and hence, acidity increased with aging. Hunter L value decreased with aging. The a value rapidly increased until step 3, whereas the b value decreased. Fructose content decreased while glucose contents slightly increased during aging. Hardness, chewiness and gumminess rapidly decreased, indicating softening in texture, but it was negligible after aging step 3. Phenolic compounds including gallic acid and homogentisic acid were detected at step 3 and then gradually increased with aging. However, contents of flavonoid and tannin were much higher in step 1 sample than others. The antioxidant activities observed by DPPH, ABTS, and FRAP assay were the highest at step 1 possibly due to the higher levels of flavonoids and tannin acid in the step 1 sample.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.27-32
• /
• 2020

This paper compare the adaptive equalization performance according to the values of adaptive step variation speed for adapting in VS-CCA (Variable Stepsize-Compact Constellation Algorithm) based on nonlinear function function of error signal. The VS-CCA algorithm compacts the 16-QAM nonconstant modulus signal into the 4 groups of 4-QAM constant modulus signal constellation in quadature plane, then the error signal is generated using the constant modulus of transmitted signal statistics. The adaptive equalizer coefficient were updated in order to achieve the minimum cost function by varying step based on the nonlinear function of error signal. In this time, the instantaneous adaptive step is determined according to the value of step variation speed of nonlinear function and the different equalization performance were obtained according to the step variation speed value. The equalizer internal index and external index which represents the robustness of external noise were used for the performance comparison index. As a result of computer simulation, it was confirmed that the value of variation speed less than 1.0 give more superior in every performance index compared to the greater than 1.0 in steady state.