• 제목/요약/키워드: steel-making slag

검색결과 57건 처리시간 0.025초

Ladle내 잔류(殘留) 용융(熔融)슬래그의 LF 공정(工程)으로 재활용(再活用)에 관한 연구(硏究) (A Study on the Recycling of Molten Ladle Slag Residue into LF Process)

  • 김영환;유정민;김동식;임종훈;양성호
    • 자원리싸이클링
    • /
    • 제22권1호
    • /
    • pp.36-41
    • /
    • 2013
  • 전기로 제강공정 중 LF 공정에서 슬래그는 전기로(EAF)에서 이월된 슬래그와 출강 중에 조재제인 생석회, 돌로마이트 등이 용강 중에 투입되어 생성된다. LF 조업이 끝나면 ladle은 연속주조 공정(CCM)으로 이송되며, ladle 하부의 노즐을 통해 tundish로 용강을 내보내어 연속 주조조업을 하게 된다. 일반적으로 연속 주조공정 후 ladle에 남는 슬래그와 잔강(殘鋼)은 슬래그 포트(Pot)에 받아 슬래그 야적장으로 이송되어 파쇄 후 처리된다. 본 연구에서는 연속 주조공정 후 ladle에 잔류한 용융슬래그(잔강(殘鋼) 포함)를 전기로 출강 후에 ladle 상부에 직접 투입하여 LF 공정 초기의 슬래그를 형성하는데 활용하고자 하였다. 그 결과 LF 공정 중에 사용되는 생석회의 원단위는 2.2 ~ 3.2 kg/steel-ton 저감되었으며, 용강의 생산회수율은 0.3 ~ 0.5% 증가되었다.

제강슬래그 특성을 이용한 축산폐수 처리효과 (Swine Wastewater Treatment by using Steel-making Slag)

  • 김태희;박경봉
    • 청정기술
    • /
    • 제6권2호
    • /
    • pp.85-92
    • /
    • 2000
  • 제강슬래그의 재활용 범위를 확대하기 위한 방안으로 제강슬래그를 여재로 이용하여 축산폐수 처리효과를 조사하였다. 제강슬래그를 접촉용 여재로 활용한 순환식 폐수처리 장치를 이용하여 기존의 시설에서 처리된 축산폐수를 재처리한 결과 pH는 제강슬래그의 특성으로 인하여 상승하였으며 질소와 인의 농도를 효과적으로 낮추었으며 COD와 BOD도 감소하였다. 축산단지의 현장실험 결과 여재로 사용한 제강슬래그는 부유물질을 효과적으로 제거하였으며 유입 농도의 갑작스런 변화를 완화하였다. COD와 BOD의 경우 재처리수에서 항상 유입 폐수보다 낮아졌으나 유입수의 농도에 영향을 받았다. 에이징된 제강슬래그를 열처리 한 경우 free-CaO 성분의 증가로 열처리를 하지 않은 경우에 비하여 처리수의 pH 상승 정도가 커졌으며 인 제거 특성도 향상되었다.

  • PDF

해수에 의한 제강 슬래그의 납, 구리, 카드뮴 및 수은 화합물의 용출특성 평가 (Evaluation of Lead, Copper, Cadmium, and Mercury Species in the Leachate of Steel Making Slag by Seawater)

  • 이한국;이동훈
    • 대한환경공학회지
    • /
    • 제27권1호
    • /
    • pp.75-84
    • /
    • 2005
  • 본 연구는 해양구조물로 재활용되는 제강 슬래그의 납, 구리, 카드뮴과 수은의 용출특성을 평가하는데 있다. 이를 위하여 고형폐기물의 용출규제 시험, 액고비 변화시험, pH 고정시험과 같은 다양한 용출시험을 하였다. 용출용매로 증류수를 이용한 경우와 해수를 이용한 경우의 pH 고정시험 결과, 제강슬래그에서 용출된 납, 구리, 카드뮴은 뚜렷한 차이를 확인할 수 있었다. 용출용매로 증류수 사용시, pH 7-8 구간과 pH 11-12 구간에서 낮은 용출을 보였지만, 해수를 용출용매로 사용한 경우는, 증류수를 용매로 사용한 것 보다 높게 용출되었다. 수은 용출의 경우는 증류수를 용출용매로 이용한 것보다 해수를 이용한 경우에서 더 낮게 용출되었다. 한편, 제강 슬래그에서 용출되는 납, 구리, 카드뮴의 용존 및 침전 상태의 파악과 중금속 화합물들의 파악을 위하여 지화학 평형 프로그램인 Visual minteq를 사용하였다. 해수와 반응한 제강 슬래그에서 용출된 납, 구리는 pH 11-12 구간에서 대부분 용존되지만 pH가 감소되는 pH 7-10에서는 90% 이상만이 침전하였고, 카드뮴의 경우는 100% 용존상태로 존재하였다. 증류수와 반응한 제강 슬래그에서 용출된 납은 해수의 경우도 유사하였고, 구리와 카드뮴은 100% 용존상태로 존재하였다. 해수 내의 $Cl^-,\;CO_3^{-2},\;SO_4^{-2}$와 결합한 납화합물은 $PbCl^+,\;PbSO_4$로 이루어졌으며, 구리화합물은 $CuSO_4,\;CuCO_3$, 카드뮴화합물은 $CdCl^+,\;CdSO_4$ 등이 형성되었다. 수은의 경우는 해수 및 증류수를 용출용매로 이용한 모든 경우에서 납, 구리, 카드뮴과는 달리 대부분 침전하였다. 더욱이 해수에 존재하는 고농도 염소($Cl^-$)와의 수착으로 인해 finite solid인 calomel($Hg_2Cl_2$)이 형성되어 대부분 침전(SI=0)되기 때문에 납, 구리, 카드뮴 보다 더 낮은 환경이동성을 갖을 것으로 사료된다. 상기 실험결과 용출용매로 증류수와 해수를 이용했을 때, 제강 슬래그에서 용출되는 납, 구리, 카드뮴, 수은의 용출 경향의 차이를 확인할 수 있었고 이에 따라서, 납, 구리, 카드뮴의 용출 유해성은 낮기 때문에 해양구조물로의 제강슬래그 유효이용은 적합할 것으로 판단되었다.

해양구조물 제조를 위한 제강슬래그 골재 조합별 물성평가 및 콘크리트 개발(II) (Development of Concrete and Evaluation of Properties of Combined Steel making Slag Aggregates for Offshore Structure Production(II))

  • 정원경;김현석;박동천;조봉석
    • 자원리싸이클링
    • /
    • 제25권2호
    • /
    • pp.60-68
    • /
    • 2016
  • 본 연구에서는 앞서 분석된 제강슬래그 골재의 특성을 활용하여 해양구조물 중에 하나인 테트라포트에 대한 콘크리트 제조 가능성을 연구하였다. 제강슬래그 골재 평가결과, 급랭전로슬래그와 서랭식 20 mm 분쇄 슬래그 및 이들을 50%씩 조합한 골재의 물성이 콘크리트용 골재 물성에 가장 적합한 것으로 평가되어 이를 활용하여 콘크리트 물성을 평가하고 최적배합을 도출하고자 하였다. 연구 결과, 급랭전로슬래그(RCS), 서랭식 20 mm 슬래그 골재의 단독사용은 작업성, 성형성에 있어 다소 불리한 것으로 평가되었으나 RCS 50%와 서랭 20 mm 50%를 혼합하여 사용할 경우 작업성 향상 및 내구성 또한 향상되는 결과를 나타내었다. 따라서, 제강 슬래그 골재를 이용한 해양구조물 제조에 있어 급랭식 또는 서랭식 골재의 단독사용보다는 골재간 조합을 통하여 콘크리트용 골재 품질기준을 만족시킨 후 사용하여야 할 것이며, 골재 품질기준을 만족한 제강슬래그 골재는 콘크리트 제조에 있어 일반 콘크리트용 골재와 동등 또는 그 이상의 성능을 발현하는 것으로 평가되었다.

제강슬래그를 이용한 돈사폐수 처리 시설 개발 (Development of Treatment Facilities for Swinery Wastewater Using Steel-making Slag)

  • 이건주;이종은;김순영;김태희;백승철
    • 한국안전학회지
    • /
    • 제15권4호
    • /
    • pp.127-133
    • /
    • 2000
  • The incomplete treatment of the swinery wastewater is one of the major factors of the river contamination resulting from an eutrophication. Even through many treatments were considered to reduce the contamination of the river by the swinery wastewater, the most effective treatment was not developed yet. Therefore, this project was focused on the development of the treatment that was a low cost and a high efficiency using a steel-making slag. The swinery wastewater was passed through a U-type tube packing the slag in the laboratory. And the swinery wastewater was cleaned effectively in the laboratory experiment. Based on these laboratory results, the treatment facility in a stock farm was constructed to confirm the effect of slag on the first-treated swinery wastewater. After the treatment of the first-treated swinery wastewater through the slag, the water quality of the river was improved and the biodiversity was increased.

  • PDF

개질처리한 제강슬래그 잔골재 사용 콘크리트의 성질 (A Fundamental Property of Concrete Containing Atomized Steel Slag Fine Aggregate after Reforming Process)

  • 문한영;유정훈;박영훈;김주용;윤표호;김얼
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2003년도 가을 학술발표회 논문집
    • /
    • pp.318-321
    • /
    • 2003
  • Steel slag is produced during steel making process. Compared with the blast furnace slag, converter slag has the expansibility due to the reaction with water and free CaO. Therefore it is specified in Standard Specification for Concrete in Korea that steel slag aggregate must not be used in concrete. In this study, atomized steel slag aggregate is conducted from converter slag by the atomizing method. Atomized steel slag and conventional converter slag are same in its composite by nature in the converter but compounds of the composite become different because of different method of slag treatment. Especially atomized steel slag aggregate overcomes expansibility that is the weak point for usage. It is researched whether it has the possibility, suitability for fine aggregate in concrete. Slump and air content are measured in fresh concrete, compressive and bending strength in hardened concrete. These is compared with control concrete with washed sand.

  • PDF

벤토나이트 혼합율에 따른 제강 슬래그 및 슬러지의 투수 특성 변화 (Characteristics of Saturated Hydraulic Conductivity in Steel Making Slag and Sludge according to Mixing Rate of Bentonite)

  • 우원재
    • 한국환경복원기술학회지
    • /
    • 제3권1호
    • /
    • pp.52-61
    • /
    • 2000
  • Permeability is important factor in the geotechnical problems, such as seepage discharge and dissipation of excess pore water pressure. The Kozeny-Carman equation works well for graded soils but serious discrepancies are found in clays. Major factor for these discrepancies is the tortuous flow path and unequal pore size. To estimate the permeability of fine grained soils, a permeability equation in which swelling potential is coupled with Kozeny-Carman equation is proposed in this study. To verify proposed equation, a series of variable head permeability test was carried out for steel making slag and sludge mixed with bentonite. The coefficients of permeability which is measured in the laboratory is compared with the values by the proposed equation. From the comparison, it is shown that the proposed equation can predict the coefficient of permeability of clays with satisfaction. As steel making slag and sludge is industry waste, it is reused as material of road foundation and cement but the rate of use is low. It mixed sodium-bentonite with high swelling property and permeability decrease effect. Then, Admixture investigates reuse possibility as liner of waste fill.

  • PDF

휘발성 유기화합물 제거를 위한 제강슬래그로 제조된 세라믹 여재의 흡착효율 (The adsorption efficiency of ceramic filter media prepared with the steel-making slag for the removal of VOCs)

  • 신준호;김태희;박경봉
    • 한국결정성장학회지
    • /
    • 제20권3호
    • /
    • pp.153-157
    • /
    • 2010
  • 본 연구에서는 제강슬래그의 재활용 범위를 확대하기 위하여 제강슬래그를 접촉여재로 활용한 유기화합물의 흡 착성능을 평가하였다. 또한 표면에 미세한 기공을 가지고 있어 흡착여재와 여과필터로 많은 연구가 되어온 규조토를 제강 슬래그와 혼합하여 세라믹 여재를 만들고 유기화합물 흡착 특성을 평가하였다. 유기화합물로는 아세틸알데히드, 포름알데히드, 암모니아 기체를 사용하였으며, 각각 80%, 96%, 85%의 흡착 효율을 나타내었다. 사용된 모든 기체에 대해서 80% 이상의 흡착효율을 나타내어 흡착여제로의 활용 가능성을 확인할 수 있었다.

Radiation Shielding Property of Concrete Using the Rapidly Cooled Steel Slag from Oxidizing Process in the Converter Furnace as Fine Aggregate

  • Kim, Jin-Man;Cho, Sung-Hyun;Kwak, Eun-Gu
    • 한국건축시공학회지
    • /
    • 제12권5호
    • /
    • pp.478-489
    • /
    • 2012
  • Each year, about four million tons of steel slag, a by-product produced during the manufacture of steel by refining pig iron in the converter furnace, is generated. It is difficult to recycle this steel slag as aggregate for concrete because the reaction with water and free-CaO in steel slag results in a volume expansion that leads to cracking. However, the steel slag used in this study is atomized using an air-jet method, which rapidly changes the melting substance at high temperature into a solid at a room temperature and prevents free-CaO from being generated in steel slag. This rapidly-cooled steel slag has a spherical shape and is even heavier than natural aggregate, making it suitable for the aggregate of radiation shielding concrete. This study deals with the radiation shielding property of concrete that uses the rapidly-cooled steel slag from the oxidizing process in the converter furnace as fine aggregate. It was shown that the radiation shielding performance of concrete mixed with rapidly-cooled steel slag is even more superior than that of ordinary concrete.

해양구조물 제조를 위한 제강슬래그 골재 조합별 물성평가 및 콘크리트 개발( I ) (Development of Concrete and Evaluation of Properties of Combined Steel making Slag Aggregates for Offshore Structure Production (I))

  • 정원경;황윤석;박동천;조봉석
    • 자원리싸이클링
    • /
    • 제25권2호
    • /
    • pp.49-59
    • /
    • 2016
  • 제강슬래그는 제강과정에서 필연적으로 발생되는 산업부산물로 토목용, 돌용 및 시멘트 원료 등으로 재활용되고 있다. 그러나 재활용분야가 대부분 저부가가치 분야에 집중되어 제강슬래그의 장점을 활용한 다양한 분야로의 활용이 요구되고 있는 실정이다. 제강슬래그를 콘크리트용 골재로 활용하기 위한 다양한 연구가 있었으나 한정적인 제강슬래그에 대해 이루어졌으며 대부분의 연구가 팽창성 억제에 관한 것으로 실질적인 콘크리트용 골재로써의 적합성에 대한 연구는 미비한 실정이다. 본 연구에서는 생산방식에 따라 제강슬래그 골재를 구분하여 총 7종을 통한 골재간 조합을 통해 콘크리트용 골재로 활용가능성을 평가하였다. 연구결과, 제강슬래그 골재를 일반 콘크리트용 골재와 동등하게 활용하기에는 입도, 염화물함량 등의 기준에 부족한 것으로 나타났으나 적절한 골재조합을 통해 특수분야에 한하여 콘크리트용 골재로는 그 활용성이 매우 높은 것으로 평가되었다.