• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1569-1576
• /
• 2011

To install heavy structures in the railway bridges, crane methods or launching methods using temporary structure have been applied. These methods are uneconomical because working yard is required, temporary cut of rail system, etc. In this study, various construction methods has been developed which are suitable to the filed conditions. In the case of simple span structure like plate girder bridges, the girder is loaded to troy system at the working yard and then transferred to the working place. To lift and lower the girder system, a new transfer system was developed. Different methods each for simple span bridge girder and long span girder were developed and detailed work procedures were proposed. Using these methods, the heavy structures can be installed with simple and safe work procedures and the construction cost and duration can be reduced.

• Steel and Composite Structures
• /
• 제15권5호
• /
• pp.567-583
• /
• 2013

Experimental studies and finite element analyses have been carried out to establish the effect of tendon damage on the structural behavior of concrete filled tubular tied arch girder (CFTA girder). The damage of tendon is considered in different stages by varying the number of damaged cables in the tendon. Static and dynamic structural parameters are observed at each stage. The results obtained from the experiments and numerical studies have been compared to validate the studies. The tendons whose damage can significantly affect the stiffness of the CFTA girder are identified by performing the sensitivity analysis. The locations in the girder which are sensitive to the tendon damage are also identified.

• 한국강구조학회 논문집
• /
• 제21권4호
• /
• pp.403-411
• /
• 2009

본 연구에서는 1995년 고베 지진에 의해 손상을 입은 강 거더 교량에 대해 비선형 지진해석을 수행하였다. 해석수행을 위해 휨-축력 및 휨-전단-축력간의 상호작용을 모사할 수 있는 이력모델을 제안하였다. 제안된 이력모델은 힌지모델 형태로 구조해석 프로그램에 조인트 요소로 연결한 후, 힌지모델 사용한 간편한 해석기법을 교량 교각에 적용하였다. 휨-축력 상호작용을 고려한 해석결과는 상세한 화이버 요소 해석결과와 비교하였고, 좋은 상관관계를 나타내었다. 또한, 휨-축력-전단 상호작용을 고려한 해석결과는 지진하중을 받는 교각의 변위 요소별 검토가 가능하여 교각의 전체 변위성능 분석에 유용하게 사용할 수 있을 것으로 판단된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1034-1039
• /
• 2004

The major objective of this study is to investigate the effects and application of reinforcement for steel plate girder railway bridge by the external prestressing method. It analyzed the mechanical behaviors of non-ballasted railway bridge with ballast reinforced and external post-tensioning reinforced on the finite clement analysis for the static and dynamic behavior. As a result, the reinforcement of ballasted railway bridge the external prestressing method are obviously effective for the additional dead force which is ballast. The analytical study are carried out to investigate the post-tension force decrease bending behavior and deflection in composite bridge for serviceability. To develop two type FEM model which reflect well the post-tension force transverse distribution behavior of servicing bridge. With the comparing the results of railway bridge with ballast which carried out before the post-tensioning with the results of railway bridge with ballast which carried out after post-tensioning, It is investigated that the additional dead load decrease effect and bending behavior of servicing bridge is effect by the post-tensioning. The reinforcement by using the external tendon can be reducing that structure of a degradation phenomenon by unusual stresses due to additional dead load and other problems.

• Steel and Composite Structures
• /
• 제20권6호
• /
• pp.1237-1257
• /
• 2016

The paper concerns analysis of effects of shrinkage of slab concrete in a steel-concrete composite deck of a through truss bridge span. Attention is paid to the shrinkage alongside the span, i.e., transverse to steel-concrete composite cross-beams. So far this aspect has not been given much attention in spite of the fact that it affects not only steel-concrete decks of bridges but also steel-concrete floors of steel frame building structures. For the problem analysis a two-dimensional model is created. An analytical method is presented in detail. A set of linear equations is built to compute axial forces in members of truss girder flange and transverse shear forces in steel-concrete composite beams. Finally a case study is shown: test loading of twin railway truss bridge spans is described, verified FEM model of the spans is presented and computational results of FEM and the analytical method are compared. Conclusions concerning applicability of the presented analytical method to practical design are drawn. The presented analytical method provides satisfactory accuracy of results in comparison with the verified FEM model.

• Steel and Composite Structures
• /
• 제14권5호
• /
• pp.409-429
• /
• 2013

A composite box-girder with corrugated steel webs has been used in civil engineering practice as an alternative to the conventional pre-stressed concrete box-girder because of several advantages, such as high shear resistance without vertical stiffeners and an increase in the efficiency of pre-stressing due to the accordion effect. Many studies have been conducted on the shear buckling and flexural behavior of the composite box-girder with corrugated steel webs. However, the torsional behavior is not fully understood yet, and it needed to be investigated. Prior study of the torsion of the composite box-girder with corrugated steel webs has been developed by assuming that the concrete section is cracked prior to loading and doesn't have tensile resistance. This results in poor estimation of pre-cracking behaviors, such as initial stiffness. To overcome this disadvantage of the previous analytical model, an improved analytical model for torsion of the composite box-girder with corrugated steel webs was developed considering the concrete tension behavior in this study. Based on the proposed analytical model, a non-linear torsional analysis program for torsion of the composite box-girder with corrugated steel webs was developed and successfully verified by comparing with the results of the test. The proposed analytical model shows that the concrete tension behavior has significant effect on the initial torsional stiffness and cracking torsional moment. Finally, a simplified torsional moment-twist angle relationship of the composite box-girder with corrugated steel webs was proposed based on the proposed analytical model.

• Structural Engineering and Mechanics
• /
• 제82권1호
• /
• pp.69-79
• /
• 2022

This paper discusses the field testing of two single-span double-tee girder (DTG) bridges in South Dakota to determine live load distribution factors (LLDFs) and the dynamic load allowance (IM). One bridge had seven girders and another had eight girders. The longitudinal girder-to-girder joints of both bridges were deteriorated in a way that water could penetrate and the joint steel members were corroded. A truck traveled across each of the two bridges at five transverse paths. The paths were tested twice with a crawl speed load test and twice with a dynamic load. The LLDFs and IM were determined using strain data measured during the field tests. These results were compared with those determined according to the AASHTO Standard and the AASHTO LRFD specifications. Nearly all the measured LLDFs were below the AASHTO LRFD design LLDFs, with the exception of two instances: 1) An exterior DTG on the seven-girder bridge and 2) An interior DTG on the eight-girder bridge. The LLDFs specified in the AASHTO Standard were conservative compared with the measured LLDFs. It was also found that both AASHTO LRFD and AASHTO Standard specifications were conservative when estimating IM, compared to the field test results for both bridges.

• 한국강구조학회 논문집
• /
• 제14권6호
• /
• pp.691-699
• /
• 2002

본 논문에서는 수직 및 수평 브레이싱을 생략하고 I-형 거더를 가로보만으로 연결한 다주형 강합성 플레이트거더교 형식에서 가로보의 적정 배치 간격 및 소요 휨강성의 산정을 위한 연구를 수행하였다. 이를 위해 지간 40m의 단순교와 40+50+40m의 2차로 4주형 연속교를 예제교량으로 시산 설계하였다. 본 교량에 대해 중간가로보의 배치 간격과 휨강성를 매개변수로 하여 합성전 후 고정하중, 활하중 및 지진하중을 포함하는 설계하중에 대한 응력 해석을 수행한 후 강재 주형 및 라로보의 격자구조에 대해 합성전 고정하중을 고려한 재료-기하비선형해석으로부터 횡비틀림 좌굴강도를 평가하였다. 이상의 두 가지 국면 해석 결과를 토대로 단부 및 중간가로보의 적정 배치 간격과 소요 휨강성을 제안하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.137-140
• /
• 2008

최근 교량분야에서는 강교량의 합리적인 개선을 위해 복잡한 구조의 단순화 및 표준화 방안으로 거더수를 최소화하여 시공성 및 유지보수성을 향상시킨 소수거더교에 대한 관심이 급증하고 있다. 소수 거더교는 거더수를 최소화하여 미관상 유리하며, 다주형교에 비해 상대적으로 부재수가 줄어들게 되어 제작 상에도 유리하다. 그러나 바닥판의 지간과 캔틸레버의 길이가 길어지게 되어 장지간 바닥판의 성능확보에 대한 검증이 필요하며, 다주형교에 비해 형고가 증가하게 된다. 본 연구에서는 이러한 한계를 극복하고 소수거더교의 구조적 성능을 극대화하기 위하여 기존 현장타설 바닥판을 대체하여 프리캐스트 콘크리트 바닥판을 적용하였다. 프리캐스트 콘크리트 바닥판은 공장에서 제작하므로 고강도, 고내구성의 고품질 바닥판 생산이 가능하다. 또한 내부긴장재에 의해 도입된 압축응력으로 인해 단순교 뿐만 아니라 연속교의 부모멘트 구간에서도 바닥판의 전단면이 유효하여, 바닥판의 단면을 주거더 단면의 일부로 고려할 수 있으므로 강거더의 중량 뿐만 아니라 형고를 경감시킬 수 있는 장점이 있다. 본 연구에서는 프리캐스트 콘크리트 바닥판을 적용한 소수거더교의 설계개념과 이를 적용한 부산-거제 연결도로 현장의 저도교, 전주우회도로 현장의 구증교의 설계사례에 대하여 소개하고자 한다.

• Steel and Composite Structures
• /
• 제10권3호
• /
• pp.223-243
• /
• 2010

This paper reports recent developments concerning the application of Generalised Beam Theory (GBT) to the structural analysis of steel-concrete composite bridges. The potential of GBT-based semi-analytical or finite element-based analyses in this field is illustrated/demonstrated by showing that both accurate and computationally efficient solutions may be achieved for a wide range of structural problems, namely those associated with the bridge (i) linear (first-order) static, (ii) vibration and (iii) lateral-torsional-distortional buckling behaviours. Several illustrative examples are presented, which concern bridges with two distinct cross-sections: (i) twin box girder and (ii) twin I-girder. Allowance is also made for the presence of discrete box diaphragms and both shear lag and shear connection flexibility effects.