• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.292-301
• /
• 1997

In drying process, to minimize the quality degradation by improved drying process and pretreatment methods, carrots, cabbages and radishes were dried and rehydrated. Physico-chemical properties of product were analyzed to determine the optimum pretreatment method and drying models were applied to explain drying mechanisms. Microwave, steam and water were used prior to drying as blanching method. In consideration of physical properties, optimum treatment time was decided that microwave was 1 min, steam and water were each 10 min. Control, steam, water, microwave and osmotic dehydration were treated prior to drying as pretreatment individually, osmotic dehydration was lower than the other treatmemt in drying efficiency, but carotene content was higher than the others. The effect continued after rehydration. Ten panelists tested dried and rehydrated carrots. After rehydration, the quality of air dried product with osmotic dehydration was superior to freeze dried without treatment. The fittness of drying models were conducted in order to explain the mechanism of drying each process. Quadratic model was most fittable to explain during drying. However, in rehydration process, no fittable model was found.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.1
• /
• pp.117-123
• /
• 2007

HPLC quantifications of fresh and cooked (steamed/microwaved) spinach, one of the most frequently consumed vegetables in foodservice operations, were carried out to determine carotenoids compositions. An S-3 $\mu$m C30 stationary phase for reversed-phase columns with diode-array detection was used to separate and quantify geometric isomers of provitamin A carotenoids in the fresh and cooked spinach. The carotenoids in fresh spinach were identified and quantified: Lutein (63.0%), $\beta$-carotene isomers (all-trans 29.6%, 9-cis 3.2%, 13-cis 1.8%, $\alpha$-carotene 0.4%, zeaxanthin 2.1%) and cryptoxanthin. Cryptoxanthin, detected in a trace amount in HPLC, was not quantified in this study. Lutein was little affected by cooking methods and frozen conditions. 9-cis and 13-cis-$\beta$-carotene isomers were major types formed during cooking. Cooking (steam/microwave) did not alter carotenoid profiles of the samples, but the amounts of carotenoids quantified were greater than those in the fresh samples. Heat treatment such as steaming increased total carotenoids contents, especially trans-$\beta$-carotene (p<0.05). The carotenoid contents of the frozen spinach increased even after the microwaved treatment (p<0.05). These increases were likely to result from the increased extraction efficiency and inactivation of enzymes capable of carotenoids degrading during the heat treatments.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.11
• /
• pp.1563-1567
• /
• 2017

Objective: The influence of substituting steam-flaked corn (SFC) for dry rolled corn (DRC) on feedlot cattle growth performance and dietary net energy when cattle are allowed either ad libitum or 2-h restricted access to the finishing diet was evaluated. Methods: Treatment effects were tested using 96 crossbred steers ($251{\pm}2kg$) during the initial 56 d of the finishing phase. Cattle were blocked by weight and randomly assigned within blocks to 16 pens (4 pens/treatment). Bunk space was sufficient (41 cm/head) to allow all steers access to the feed bunk at the same time. Treatments consisted of two finishing diets containing (dry matter basis) 77.1% corn grain processed by dry rolling (density = 0.50 kg/L) or steam flaking (density = 0.36 kg/L). Cattle were fed twice daily at 06:00 and 14:00 h, allowing for approximately 5% residual. In the case of restricted feeding, steers were allowed access to feeders for 1 h following each feeding, after which residual feed was withdrawn. Results: There were no treatment interactions on dry matter intake (DMI), average daily gain (ADG), gain efficiency (G:F), or dietary net energy (NE). Restricting feed access time reduced (p<0.01) feed intake, and hence, ADG. Substitution of SFC for DRC increased (p<0.01) ADG, feed efficiency (G:F), and estimated dietary NE, without affecting DMI. Based on tabular net energy of maintenance ($NE_m$) value (2.18 Mcal/kg) for DRC, the estimated $NE_m$ value for SFC using the replacement technique, averaged 2.44 Mcal/kg; an improvement of 10.7%. The ratio of observed-to-expected dietary NE was not affected by feed access time. Conclusion: Substitution of SFC for DRC in finishing diets for feedlot cattle enhanced ADG, gain efficiency, and the NE value of the diet. Although restriction of feed access time depressed DMI and ADG, it did not affect the comparative benefit of steam flaking toward enhancement of ADG, G:F, and dietary NE.

• Korean Journal of Food Science and Technology
• /
• v.46 no.5
• /
• pp.660-664
• /
• 2014

This study aimed to investigate the effects of various soft steam treatments, namely, forced convection-boiler, forced convection-fan, and natural convection, on the pretreatment characteristics of potatoes. In this study, potatoes were exposed to various cooking conditions, including steaming method, treatment time (0-60 min), and temperature (60, 70, $80^{\circ}C$). Then, changes in temperature, cook value, ascorbic acid content, moisture content, and weight loss in the fresh and steam-treated samples were measured and evaluated. The results clearly showed that natural convective steaming was superior to other treatments in terms of heating characteristics, cook value (FC-b: $46.4{\pm}1.7$, FC-f: $21.8{\pm}1.1$, NC: $52.1{\pm}1.9min$ at $80^{\circ}C$), ascorbic acid content (FC-b: $36.5{\pm}2.7$, FC-f: $28.5{\pm}2.9$, NC: $48.2%{\pm}2.5%$ at $80^{\circ}C$), moisture retention (FCb: $74.6{\pm}0.8$, FC-f: $71.5{\pm}0.5$, NC: $77.6%{\pm}0.4%$ for 60 min at $80^{\circ}C$), and weight loss (FC-b: $13.9{\pm}0.8$, FC-f: $15.6{\pm}0.6$, NC: $10.6%{\pm}0.7%$ for 60 min at $80^{\circ}C$) for thermally processed potatoes.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.3
• /
• pp.9-13
• /
• 2000

Wood demand is increasing more and more, but world has been confronted with decreasing forest resources. Korea has to depend upon foreign wood and wood-based products for more than 95 percent of total domestic demand per year. In order to heighten self-sufficiency for wood supply and demand, we have to develop wood substitutes. Rice hull is the cheapest agricultural by-product we can get in Korea, more over the production of rice hull amounts to 1 million tons per year. This study was carried out to utilize rice hull and to decide the optimum condition of rice hull pretreatment for manufacture of rice hull board. Steam explosion method gave the best result, and the next boiling treatment of 1 hour, the last 1 hour treatment with 1% NaOH solution. Optimum conditions of explosion method were 20kgf/$cm^2-1$ minute and 25kgf/$cm^2-1$ minute. Rice hull board made with exploded rice hull met the KS standard(KS F 3104, 1997) and showed the same strength as a control, PB. And also the 1 hour boiling treatment was more effective than the 1 hour treatment with 1% NaOH solution.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.247-250
• /
• 2008

Biomass gasification is a promising technology for producing a fuel gas which is useful for power generation systems. In biomass gasification processes, tar formation often causes some problems such as pipeline plugging. Thus, proper tar treatment is necessary. So far, nickel (Ni)-based catalysts have been intensively studied for the catalytic tar removal. However, the deactivation of Ni-based catalysts takes place because of coke deposition and sintering of Ni metal particles. To overcome these problems, we have been using ruthenium (Ru)-based catalyst for tar removal. It is reported by Okada et al., that a Ru/$Al_2O_3$ catalyst is very effective for preventing the carbon deposition during the steam reforming of hydrocarbons. Also, this catalyst is more active than the Ni-based catalyst at a low steam to carbon ratio (S/C). Benzene was used for the tar model compound because it is the main constituent of biomass tar and also because it represents a stable aromatic structure apparent in tar formed in biomass gasification processes. The steam reforming process transforms hydrocarbons into gaseous mixtures constituted of carbon dioxide ($CO_2$), carbon monoxide (CO), methane ($CH_4$) and hydrogen ($H_2$).

• Proceedings of the Korean Fiber Society Conference
• /
• 1987.06a
• /
• pp.39-39
• /
• 1987

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.203-203
• /
• 2011

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1278-1279
• /
• 2006

New product line with additional secondary operation of oil pump rotor was built in necessity of increasing capacity. This new line includes steam treatment process after sizing. The new line achieved 1.6 times higher performance compared with a conventional line.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.448-449
• /
• 2018