• Journal of Welding and Joining
• /
• 제14권4호
• /
• pp.89-98
• /
• 1996

This study was performed to establish the characteristics of the heat affected zones from view point of the repair weldability for a damaged CrMoV steam turbine rotor steel. Characterization of the heat affected zones of the weldment was conducted with respect to various of postweld heat treatment temperatures, $566^{\circ}C$, $621^{\circ}C$ and $677^{\circ}C$. The evaluations of the heat affected zones were carried out in terms of microstructural characterization, microhardness measurements, Charpy v-notch impact, tensile and stress-rupture tests. The results indicated that the effect of the postweld heat treatment at $677^{\circ}C$ exhibited the favorable microstructure and mechanical properties for the stability of the heat affected zones. While the heat affected zone of the weldment, produced without postweld heat treatment, displayed the inferior toughness and microstructure indicating localized carbide precipitations on the grain boundary. It was also indicated that the stability of the heat affected zones were deteriorated by the formation of the cavitation on the grain boundaries.

• 한방안이비인후피부과학회지
• /
• 제20권1호통권32호
• /
• pp.285-293
• /
• 2007

Burn is a dermal injury mainly caused by heat. It occurs by flame, boiling water or liquid, steam, sparks, chemicals, radiation, and electricity. Burn is classified as four grades depending on how deep into the skin a person is burned. As the deep second-degree burns possibly leave scars, it can have various physical, psychological, and aesthetical effects with seriousness on the patient with a burn. This report is on the 50-year-old female patient who had a burn with boiling water and a mixture condition of superficial and deep second degree burn. The Korean medical treatments such as Herbal acupuncture, Herbal medication, Acupuncture, Herbal-ointment were used for 17 days to treat effectively the patient with a mixture of superficial and deep second degree burn. It is difficult to find out the report that treats a burn with Korean medical treatment. If more clinical treatments as in this report are proved to be effective, we are able to expect that Korean medical treatment should be a good treatment in burn.

• Journal of Acupuncture Research
• /
• 제41권2호
• /
• pp.121-128
• /
• 2024

This study presents a case of facial nerve injury that occurred after parotidectomy for a benign tumor of the parotid gland that improved with integrated Korean medicine (IKM). On June 24, 2023, the patient presented with facial nerve injury based on a facial nerve conduction study after parotidectomy, with a score of five on Yanagihara's unweighted grading system (Y-system) and a grade of five on the House-Brackmann facial grading scale (H-B scale). During the 15 days of admission, IKM treatments, including acupuncture, pharmacopuncture, moxibustion, herbal steam therapy, physiotherapy, herbal medicine, and thread embedding acupuncture treatment, were performed. After treatment, the strength of the orbicularis oculi, orbicularis oris, and masticatory muscles improved, with a Y-system score of 17 and an H-B scale of III. In conclusion, the findings of this study confirm the applicability and effectiveness of IKM in the treatment of facial paralysis following parotidectomy.

• Membrane and Water Treatment
• /
• 제5권2호
• /
• pp.87-108
• /
• 2014

Electrodeionization (EDI), which combines electrodialysis (ED) and conventional ion-exchange (IX), is a mature process which has been applied since more than twenty years on commercial use for the production of ultrapure water (UPW). Eliminating chemical regeneration is the main reason for its commercial success. The increase in acceptance of EDI technology has led to an installation of very large plant as the commercial state of the art that produces $1,500m^3/h$ of water for high pressure steam boiler. More recently, EDI system has found a number of new interesting applications in wastewater treatment, biotechnology industry, and other potential field. Along with further growth and wider applications, the development of stack construction and configuration are also become a concern. In this paper, the principle of EDI process is described and its recent developments, commercial scale, and various applications are pointed out.

• 한국환경보건학회지
• /
• 제29권3호
• /
• pp.79-85
• /
• 2003

The purpose of this study was to disclose the manufacturing process of activated carbon using coal. It investigated the influences on the physical properties that were manufactured activated carbon by using anthracite coal, bituminous coal under carbonizated and activated condition. The adsorption capacities of organic material were superior when the ash content was lower 5∼10%, and the iodine value was about 1,000 mg/g, the adsorption capacity decreased rapidly when ash content was over 15%. The manufactured activated carbon were found characteristics such as the iodine value was over 1,031 mg/g, the specific surface area was over 1,032 $m^2$/g and the hardness was over 95% under manufacturing conditions which were carbonizated temperature of $600^{\circ}C$( 180 minute), activated temperature of 95$0^{\circ}C$(210 minute) and steam weight of 6 $m\ell$/min.100 g coal.

• Corrosion Science and Technology
• /
• 제2권4호
• /
• pp.197-201
• /
• 2003

In this study, Ni-P layers were electroplated on the surface of stainless steel in order to investigate the effects of an additive and agitation on their mechanical properties and microstructure. The concentration of the additive in the plating solution increased, the pores formed in the layer decreased, while the residual stress developed in the layers during electroplating increased. Agitation of the solution during electroplating was observed to force to increase local pores in the layer, which lowers its tensile properties. Grain growth was suppressed due to very fine $Ni_3P$ precipitates formed at its grain boundaries during heat treatment at $343^{\circ}C$ for 1 hr in air.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.116-117
• /
• 2006

Conventional high-speed steels, which are carbide decentralized materials, are used for sliding parts, but they lack sufficient hardness for some applications. Improvement of surface hardness is possible for high-Cr steels through nitriding. However, nitriding P/M parts is not advisable without sealing the porosity before treatment, as they will become brittle. However, it is difficult to seal the pores with steam treatment, because high-Cr steel has a passive film on the surface. Controlling nitriding by decreasing the amount of oxygen on the surface to be nitrided, and grinding to decrease the porosity of the surface, makes it possible to produce a material that has reasonable and sufficient hardness in the required areas.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.348-351
• /
• 2013

Inconel 600 alloy, Ni base alloy, is widely used for steam generator tubings where sensitization occurs at grain boundaries and sensitization will induce tubing failures. This alloy has usually paramagnetic property, however, it transforms into ferromagnetic property along grain boundaries when sensitization occurs: this means NDE using magnetism for sensitization is possible. Therefore, in this study, Inconel 600 alloys were heat treated at 873 K from 0 to 400 hours so as to generate sensitization and their magnetic properties were investigated in detail. The saturation and the residual magnetization increase with increasing heat treatment time and take a maximum. On the other hand, the coercive force decreases with the increase in time of heat treatment. We confirmed that characteristics at only grain boundaries change into ferromagnetic phase by a MFM observation. As a trial for industrial application, heat treated Inconel 600 alloy was scanned by a magnetic field sensor, and the variations in magnetization were obtained nondestructively. The results indicate a feasibility of magnetic NDE for sensitization of Inconel 600 alloy.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권4호
• /
• pp.547-554
• /
• 2008

In performance, digestibility and slaughter trials, a total of forty five male weaned lambs were used to examine the effects of monensin and live yeast supplementations on growth performance, nutrient digestibility, carcass characteristics and ruminal fermentation parameters when the lambs were fed steam-flaked corn-based diets. Animals were allotted to one of three treatment diets in a completely randomized design. The three treatment diets were: (1) basal diet (CON) with steam-flaked corn as a sole grain source, (2) basal diet supplemented with monensin (MO), and (3) basal diet supplemented with live yeast (LY). Total average daily intake (ADI) was unaffected by MO and LY supplementations. LY supplementation increased (p<0.05) average daily gain (ADG) by 13.1% compared with the CON diet. Both MO and LY supplementations resulted in a significant improvement (p<0.05) of feed efficiency over the CON diet (4.47, 4.68 vs. 5.05). Hemicellulose digestibility was higher (p<0.05) for lambs in the LY supplementation group (62.4%) as compared with the CON group (55.7%), but no differences were observed in digestibilities of dry matter (DM), organic matter (OM), crude protein (CP), neutral detergent fiber (NDF) and acid detergent fiber (ADF). All carcass traits were not influenced by dietary supplementations. Ruminal pH in lambs fed the LY supplemental diet was more stable than that with the CON diet (6.57 vs. 6.17). Neither MO nor LY supplementation influenced the concentration of ruminal ammonia-N and total volatile fatty acid (VFA), and molar percentages of individual VFA. Plasma urea-N concentration was decreased (p<0.05) by MO and LY supplementations, while plasma ${\beta}$-hydroxybutyrate (BHBA), glucose and other blood parameters were unaffected. In conclusion, while both MO and LY supplementations had a positive impact on feed efficiency and LY supplementation stabilized ruminal pH and improved fiber utilization, none of the supplements had the capacity to significantly enhance the carcass characteristics.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권6호
• /
• pp.930-940
• /
• 2020

Objective: This study was conducted to evaluate changes in nutritional value and in situ dry matter (DM) degradability of oak and pine wood before and after steam-digestion process (60 min/160℃/6 atm) and feeding effect of the oak roughage on performance and behavior of Hanwoo steers. Methods: Chemical composition and tannin concentration were analyzed for oak and pine trees before and after the pretreatment. In situ DM and effective degradability of these samples were assessed using a nylon bag method. In vivo trial was performed to estimate animal performance and behavior, using steers fed total mixed ration (TMR) diets containing 0% (control), 25% (OR-25), and 50% (OR-50) of the oak roughage. Eighteen steers were allocated into nine pens (2 steers/pen, 3 pens/treatment) for 52 days according to body weight (BW) and age. Results: By the steam-digestion treatment, the neutral detergent-insoluble fiber was decreased from 86.5% to 71.5% for oak and from 92.4% to 80.5% for pine, thereby increasing non-fiber carbohydrate. In situ DM degradability of treated oak reached 38% at 72 h, whereas that of untreated oak was only 11.9%. The 0 h degradability of the treated pine increased from 5.9% to 12.1%, but the degradability was unchanged thereafter. Animal performance including BW, average daily gain, DM intake, and feed conversion ratio was not different among control and oak treatments. No differences were detected in animal behavior such as lying, standing, rumination, drinking, and eating, except walking. Walking was higher in control than oak treatments with numerically higher eating and lower lying times, probably due to bulkier characteristics of rice straw in the diet. Conclusion: This study demonstrates that the oak roughage can be substituted for 50% of total forage or 100% of rice straw in TMR diets at early fattening stage of Hanwoo steers.