• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.121-128
• /
• 2009

During a hypothetical high-pressure accident in a nuclear power plant (NPP), molten corium can be ejected through a breach of a reactor pressure vessel (RPV) and dispersed by a following jet of a high-pressure steam in the RPV. The dispersed corium is fragmented into smaller droplets in a reactor cavity of the NPP by the steam jet and released into other compartments of the NPP by a overpressure in the cavity. The fragments of the corium transfer thermal energy to the ambient air in the containment or interact chemically with steam and generate hydrogen which may be burnt in the containment. The thermal loads from the ejected molten corium on the containment which is called direct containment heating (DCH) can threaten the integrity of the containment. DCH in a NPP containment is related to many physical phenomena such as multi-phase hydrodynamics, thermodynamics and chemical process. In the evaluation of the DCH load, the melt dispersion rates depending on the RPV pressure are the most important parameter. Mostly, DCH was evaluated by using lumped-analysis codes with some correlations obtained from experiments for the dispersion rates. In this study, MC3D code was used to evaluate the dispersion rates in the APR1400 NPP during the high-pressure accidents. MC3D is a two-phase analysis code based on Eulerian four-fields for melt jet, melt droplets, gas and water. The dispersion rates of the corium melt depending on the RPV pressure were obtained from the MC3D analyses and the values specific to the APR1400 cavity geometry were compared to a currently available correlation.

• 한국식품영양과학회지
• /
• 제3권1호
• /
• pp.13-16
• /
• 1974

Chlorophyll을 함유(含有)하고 있는 녹색 식물(植物)의 조리(調理)에 의(依)한 색깔 변화(變化)는 대단히 중요(重要)하므로, 본실험(本實驗)은 각각(各各) 다른 열처리(熱處理)와 시간(時間)이 풋고추의 chlorophyll 함량(含量)에 미치는 영향을 조사하였다. 풋고추는 boiling water steam 그리고 hot air 를 사용(使用)하여, $100^{\circ}C$에서 5 10 15 분간(分間) 가열(加熱)했고, microwave oven에서는 1 2 3 분간(分間) 처리했다. 결과(結果)에 의(依)하면 chlorophyll 함량(含量)은 일반적(一般的)으로 가열시간(加熱時間)이 길어짐에 따라 감소하는 경향이었으며, 가열처리중(加熱處理中) steam이 가장 큰 영향을 주었고, boiling water 가 그 다음이었다. Hot air와 microwave 처리한 풋고추는 아주 적은 양의 chlorophyll이 변화(變化)하였다. 일반적으로 pheophytin 생성(生成) chlorophyll 함량(含量)이 감소함에 따라 증가(增加)하였다.

• Corrosion Science and Technology
• /
• 제21권2호
• /
• pp.130-137
• /
• 2022

In this work, the degradation of high-pressure superheater tubes exposed to the flame of a duct burner in a heat recovery steam generator of a district heating system was evaluated. To assess the deterioration of the used superheater tube, the microstructure, microhardness, and tensile properties were investigated by comparison to an unused tube. The study found that a fin bound at the outer surface of the used tube became fragile only in the location facing the flame. This indicates that the tube was directly exposed to the flame from the duct burner or underwent abnormal overheating. While the unused tube showed a uniform value in hardness and equiaxial grain structure, the used tube revealed a decrease in hardness up to 105 HV and an increase in grain size with a plate-like morphology in the location facing the flame. The coarsening of the grain structure by the flame weakened the mechanical properties of yield strength, tensile strength, and elongation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권8호
• /
• pp.1186-1190
• /
• 2002

One hundred and twenty nine primiparous sows were used to determine the effects of alternative processing procedures and feeding systems on the nutritional value of sorghum grain-based diets for lactating sows. Treatments were a ground sorghum control, steam-flaked sorghum and extruded sorghum fed in meal form and the ground sorghum control given as pellets or gruel (1:1 ratio of water and feed on a volume:volume basis). Average daily feed intake was greater for sows fed pelleted and gruel diet forms than sow fed the diets with steam-flaked and extruded sorghum (p<0.04). However, no differences occurred in sow weight or backfat losses among the treatments (p>0.14). Number of pigs weaned and livability rates were similar among treatments except that steam-flaked sorghum supported greater litter weight gains than extruded sorghum (p<0.02). Apparent digestibilities of DM, N and GE in sows fed steam-flaked and extruded sorghum were greater (p<0.001) than in sows fed pelleted or gruel diets. Of the various treatments, sows fed extruded sorghum tended to have the highest digestibilities of DM, N and GE, and lowest excretions of DM and N in the faeces. Severity of ulceration was not significantly affected by treatments (p>0.35), but keratinization was greatest for sows fed extruded sorghum (p<0.01). In conclusion, the alternative processing methods (steam-flaking and extrusion) and feeding system (pellets and gruel) had little effect on sow and litter performance. However, nutrient digestibilities were improved for all treatments that involved heating (steam flaking, extrusion and pelleting) and, thus, these treatments resulted in less fecal excretion of DM and N.

• 플랜트 저널
• /
• 제14권3호
• /
• pp.42-48
• /
• 2018

본 연구에서는 판형열교환기 전열면적을 25%, 50%, 75% 증가시킬 때 CHP 회수온도 변화량을 예측하고 변화된 온도를 성능해석 입력 값으로 활용하여 전기출력 변화를 해석하였다. 전열면적 투자비용과 전기 판매수익 증가를 비교하여 경제성 분석을 수행하였다. 광교 열병합발전소 연계운전이 2017년과 유사한 경향으로 이루어지면 CHP 회수온도는 전열면적 증가에 따라 $4^{\circ}C$, $6.3^{\circ}C$, $7.8^{\circ}C$까지 낮아지고 전기출력은 당초 39,025 kW에서 413 kW, 676 kW, 834 kW 증가되어 75% 증가할 경우 39,859 kW 까지 상승하였다. 경제성 분석기준인 NPV는 3.5 억원, 5억원, 5.2억원 까지 발생하여 모든 방안이 투자가치가 있다고 판단된다. 전열면적 증가에 따라 전기출력과 NPV는 비례하여 상승하지만 상승량은 감소하였다. 75%까지 증가할 경우 전기출력과 NPV는 3가지 방안 중 가장 높은 것으로 확인되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.885-890
• /
• 2004

Strictly maintaining the steam temperature can be difficult due to heating value variation to the fuel source, time delay changes in the main steam temperature, the change of the dynamic characteristics in the reheater. Up to the present time, PID Controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. This paper focuses on tuning of the Controller with disturbance rejection for thermal power plant using immune based multiobjective approach. An ITSE(Integral of time weighted squared error) is used to decide performance of tuning results.

• 한국수소및신에너지학회논문집
• /
• 제20권5호
• /
• pp.439-446
• /
• 2009

This paper investigates the dehydration and RDF (Refuse Derived Fuel) production of organic wastes, livestock manure and sewerage sludge with pressurized hydrothermal treatment process. The renewable technology for the organic wastes must involve short treatment time required, reusable energy source, anti-odor and viruses, low cost for the treatment, and well-fertilization. The pressurized hydrothermal treatment process promotes to evaporate moisture in the waste after being shortly treated in a reactor, which uses steam and heat supplied by an external boiler. By the pressurized steam, the cell walls of the waste break and effectively release the internal moisture. Then, the dried waste can be mixed with waste vinyls to produce RDF with a higher heating value as high as 6,700 kcal/kg.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.3-6
• /
• 2012

Analysis method for the radiation heat transfer from the duct burner flame to the heat exchanger in a Heat Recovery Steam Generator (HRSG) was presented to supplement the existing thermal design process. Flame on a burner and a heat exchanger were postulated as imaginary planes and flame temperature, surface and emissivity was simplified in a aspect of engineering approach. The calculated local flame radiative heat flux on the heating surface was compared with the heat flux of 3-atomic gas radiation and convection.

• 설비공학논문집
• /
• 제18권12호
• /
• pp.992-998
• /
• 2006

This study is to optimize design parameters for waste heat recovery boiler with water tube and three drum. The design optimization considered here is to find the most economic dimension of the boiler considered which results in a minimum cost in producing a unit amount of steam per given period of operation. For this purpose, optimize design have to determine what are the main parameters of affecting the total cost of producing a unit amount of steam which is comprised of manufacturing cost of the boiler, operating cost of the fan etc.

• International Journal of Advanced Culture Technology
• /
• 제8권2호
• /
• pp.260-269
• /
• 2020

The Steam Assisted Gravity Drainage (SAGD) process is an enhanced method to extract oil from bitumen which involves surface and central process facilities. This paper describes the Central Process Facilities (CPF) of SAGD and proposes several retrofit plans to the Heat Exchanger Network (HEN). In this approach, the process integration scheme is applied to estimate the energy saving in HENs, and various cases are modeled in favor of a commercial simulator. Throughout this work, a minimum approach temperature of 10℃ is assumed. The results reveal that, due to the HEN optimization using process integration, the heating and cooling duties can be reduced to 29.68MW and 1.886MW, respectively. Compared with the Husky case, all cases considered in this study indicate a potential reduction of at least 6% in total cost, including investment and operation costs.