• Journal of the Korean Wood Science and Technology
• /
• 제30권2호
• /
• pp.158-164
• /
• 2002

우드세라믹의 성질에 영향을 미치는 보드의 수지 함침율과 밀도경사의 특성을 알아보기 위하여 증기 처리를 하지 않은 보드와 증기 처리를 1, 5, 10분 실시한 보드를 석탄산수지로 함침한 후 증기분사 시간의 영향을 조사하였다. 증기처리를 하지 않은 보드의 중층과 표층의 밀도 비가 가장 컸으며, 수지 함침율, 길이 및 두께 증가율은 밀도가 증가함에 따라 감소하였다. 또한 등기처리를 10분 실시한 보드의 수지 함침율, 길이 및 두께 증가율이 가장 컸다.

• 정보교육학회논문지
• /
• 제18권2호
• /
• pp.213-224
• /
• 2014

소프트웨어와 하드웨어를 연계한 STEAM 학습은 알고리즘 향상, 문제해결 능력, 융합적 사고력 등을 크게 신장할 수 있으며, 궁극적으로 학습태도 및 학업 성취력을 높일 수 있다. 본 연구에서는 프로그래밍의 기본 개념을 이해할 수 있는 초등학교 6학년들이 스크래치와 6개의 센서가 부착된 센서 보드를 결합한 프로그래밍 활용으로 국정교과서(5종) 교과내용을 학습 할 수 있도록 학습 모형을 개발하였으며, 6학년 수업현장에서 적용하고 결과를 분석하였다. 결과로서, 평가대상인 초등학생들 대부분이 스크래치와 센서 보드를 결합한 STEAM 학습도구가 적합한 것으로 분석되었다. STEAM 학습에서의 성취도 평가에서 5개 교과 평균성취 수준이 10점 만점에 7점 이상의 평가를 받은 학생들이 39.5%를 얻었으며, 평가대상 대부분의 학생들이 만족할 만한 성취수준을 얻은 것으로 분석되었다. 따라서, 스크래치와 하드웨어인 스크래치 센서 보드를 활용한 학습은 단순히 소프트웨어만 활용하는 기존 소프트웨어 중심의 학습보다 효과적인 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제29권2호
• /
• pp.69-75
• /
• 2001

우드세라믹은 목재나 목질재료에 페놀수지를 함침한 후 고온에서 소성하여 만든 새로운 다공질 탄소재료이다. 이러한 우드세라믹의 성질은 재료의 밀도에 영향을 많이 받는 것으로 알려져 있다. 본 연구에서는 증기분사를 하지 않은 보드와 증기분사를 1분, 5분, 10분 실시한 보드 등 4가지 타입의 보드를 만든 다음 우드세라믹을 제조하여 증기분사 시간에 따른 우드세라믹의 성질을 검토하였다. 그 결과 우드세라믹의 중량감소율은 4가지 타입 모두 밀도가 증가함에 따라 증가하는 경향을 보였으며, 중량, 길이 및 두께 감소율은 증기분사를 하지 않은 보드로 제조된 우드세라믹이 증기분사를 실시한 보드로 제조된 우드세라믹보다 약간 크게 나타났다. 또한 증기분사를 하지 않은 보드로 제조된 우드세라믹의 휨강도 및 압축강도가 컸으나 증기분사 시간에 따라서는 뚜렷한 차이가 없는 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.872-882
• /
• 2017

The objective of this study was to evaluate the properties of bamboo oriented strand board (B-OSB) from andong (Gigantochloa psedoarundinacea) and betung (Dendrocalamus asper) with and without steam treatment. Strands were steam-treated at $126^{\circ}C$ for 1 h under 0.14 MPa pressure. The extractive content of bamboo strands before and after steam treatment were determined according to a standard (TAPPI T 204 om-88). Three-layer B-OSB with the core layer perpendicular to the surface and back layers were formed and binded with 8% of phenol formaldehyde (PF) resin with the addition of 1% of wax. The evaluation of physical and mechanical properties of the boards were conducted in accordance with the JIS A 5908:2003 standard. The results showed that steam treatment of bamboo strands significantly reduced the extractive content. Steam treatment tended to increase the dimensional stability and mechanical properties of B-OSB from andong and betung. The results showed that the dimensional stability and bending strength of B-OSB from betung was higher than those of andong. The internal bond strength of B-OSB from andong was higher than betung owing to a greater amount of extractives dissolved during the steam treatment.

• 한국재료학회지
• /
• 제11권10호
• /
• pp.841-845
• /
• 2001

The steam generator tubes of power plant damaged by sliding wear due to flow-induced motion of foreign object. Amount of wear have been predicted by Achard's wear equation until now. However, there are large error and low reliability, because this equation regards wear coefficient(k) as constant. The sliding wears tests have been performed at room temperature to examine parameters of wear (wear distance, contact stress). The steam generator tube material for wear test is used Inconel 600 and foreign object material is used 304 austenite stainless steel. The sliding wear tests show that the amount of wear is not linearly proportional to the wear distance(for 374 austenite stainless steel). According to experimental result, wear coefficient is not constant k but function k(s) of wear distance. The newly modified wear predictive equation V=k(s)F have small error and high reliability.

• Journal of the Korean Wood Science and Technology
• /
• 제28권3호
• /
• pp.9-13
• /
• 2000

본 연구는 해마다 100만 톤 이상이 생산되는 국내산 왕겨를 이용하여 왕겨보드를 제조함에 있어, 무처리 왕겨로 제조한 왕겨보드의 기계적 성질의 단점을 보완하기 위하여 왕겨를 전처리함으로써 그 물리 기계적 성질을 개선하기 위해 실시되었다. 연구결과를 요약하면, 무처리, 증자처리 및 가성소다로 알칼리처리한 왕겨보드보다 폭쇄처리한 왕겨보드가 휨강도 및 박리강도가 더 높았으며, 이때 적정 폭쇄처리 조건은 압력 20kgf/$cm^2$, 시간 1분과 압력 25kgf/$cm^2$, 1분이었다. 무처리 왕겨보드의 경우 휨강도, 박리강도 모두 KS를 만족시키지 못한 반면, 폭쇄처리 왕겨 보드의 경우 KS PB 18.0형의 기준을 모두 만족시켰으며, PB 대조구와 비교할 때 동등한 강도를 보였다. 기타 왕겨 전처리의 경우에 있어서도 가성소다처리보다는 증자처리가 왕겨보드의 강도를 향상시키는 것으로 나타났다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.112-116
• /
• 2011

The noise analysis is usually carried out in the early structure design stage for the main areas in a vessel such as an accommodation, an engine room, HVAC System and etc. If the analysis results are higher than the noise limits based on guideline, appropriate countermeasures are established to reduce noise levels and applied to the vessel. But excessive noise induced the main or auxiliary equipment and high pressure steam system is very difficult to check in the initial design stage, and local noise problems frequently appear in actual vessels. This paper deals with excessive noise of the engine control room on LNG carrier. It includes the cause analysis of excessive noise, the countermeasure, and verification. Also, it proves suitability of the countermeasure through the on-board test.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제44권1호
• /
• pp.21-27
• /
• 2022

Different parts of the mulberry plant are described to be potential sources of polyphenolics exhibiting strong antioxidant activity. In this study, we prepared various aqueous extracts of mulberry root bark by subjecting to steam at different temperatures and time intervals (45℃, 15 h; 70℃, 15 h; 95℃, 6 h and 95℃, 15 h) followed by extracting at 80℃ for 1 h. The total polyphenolic content ranged from 66.82-101.20 mg gallic acid equivalent (GE)/g of extract whereas the flavonoids were in the range of 13.03-25.23 mg catechin equivalent (CE)/g of extract. The extracts also exhibited strong antioxidant activities (0.99-1.66 mg trolox equivalent (TE)/g of extract in DDPH assay and 10.65-16.26 mg TE/g of extract in ABTS assay). This study clearly showed an improvement in the antioxidant activity of the water extract of mulberry root bark by the steam treatment, which can be used as a tea or health-promoting materials.

• Journal of the Korean Wood Science and Technology
• /
• 제28권4호
• /
• pp.51-55
• /
• 2000

The woodceramics which are new porous carbon materials were obtained by carbonizing from thinned small log of Aomori HIBA (Thujopsis dolabrata S. et. Z. var. hondae M.) impregnated with phenol resin in a vacuum furnace. During the carbonization process, the resin changes into glassy carbon, which has superior property. The resin impregnation rate and bending strength depend on the types of board and density. In this paper, the manufacturing method of woodceramics made from thinned small logs of Aomori HIBA was introduced and some properties were examined.

• Nuclear Engineering and Technology
• /
• 제42권6호
• /
• pp.690-703
• /
• 2010

Sampling based uncertainty analysis was carried out to quantify uncertainty in predictions of best estimate code RELAP5/MOD3.2 for a thermal hydraulic test (10% hot leg break LOCA) performed in the Large Scale Test Facility (LSTF) as a part of an IAEA coordinated research project. The nodalisation of the test facility was qualified for both steady state and transient level by systematically applying the procedures led by uncertainty methodology based on accuracy extrapolation (UMAE); uncertainty analysis was carried out using the Latin hypercube sampling (LHS) method to evaluate uncertainty for ten input parameters. Sixteen output parameters were selected for uncertainty evaluation and uncertainty band between $5^{th}$ and $95^{th}$ percentile of the output parameters were evaluated. It was observed that the uncertainty band for the primary pressure during two phase blowdown is larger than that of the remaining period. Similarly, a larger uncertainty band is observed relating to accumulator injection flow during reflood phase. Importance analysis was also carried out and standard rank regression coefficients were computed to quantify the effect of each individual input parameter on output parameters. It was observed that the break discharge coefficient is the most important uncertain parameter relating to the prediction of all the primary side parameters and that the steam generator (SG) relief pressure setting is the most important parameter in predicting the SG secondary pressure.