• Journal of The Korean Association of Information Education
• /
• v.20 no.2
• /
• pp.121-130
• /
• 2016

A variety of educational policies have been implemented to educate outstanding individuals who will lead the future and to adopt supporting systems. For the successful implementation of educational policies, it is crucial to identify the perception of teachers as main agents of education. This study conducted a survey with elementary teachers in Chungcheongbuk-do. The purpose of this study was to investigate teachers' perception on the major policies related to ICT(i.e., STEAM, Smart Education, Software Education, e-textbook, and EdudataSystem). This study also compared the distribution of teachers' perception on the policies. The results of the study indicated that teachers had relatively positive perception on the importance and the necessity of the policies. On the other hand, it was found that the levels of teachers' training experiences and readiness for teaching related to ICT were relatively low. In addition, the patterns of teachers' perception on STEAM, Smart Education and Software Education were similar. Based on the results, the study suggested that appropriate support and educational strategies for effective implementation of policies should be established.

• Journal of Korean Elementary Science Education
• /
• v.34 no.2
• /
• pp.224-237
• /
• 2015

In this study, in regard to the change of the paradigm to STEAM (Science, Technology, Engineering, Arts, and Mathematics), we have looked into the ways to apply scientific inquiry through the arts, discussed the educational implications for the ways to step forth with the science and the arts in educational field. In the development of the strategies related to the optical illusion arts, to make sure that the design-oriented science education to reach its goal to make effective teaching, students need to be understood in the method of the artistic designs. Totally it had two rounds for inspection about operation of the convergence with curriculum. As a result, students changed attitude to concentrate in class naturally while doing their art work, participating in person rather than simply looking. It is caused by the scientific approach to strategy of illusion arts. In addition, we could see that students change into a proactive manner as well as teachers comments that they are communicate and make a complete the work with others. A lot of researches give that science can provide the ideas as a method to arts, arts can provide creative ideas to science, but it is still lacking that research can be applied to education specifically on how to. An efforts in the number of collaborative research will continue to introduce, as this study STEAM of science and arts in the field of education be shifted paradigm.

• Journal of The Korean Association of Information Education
• /
• v.17 no.4
• /
• pp.409-419
• /
• 2013

The aims of this paper were to review the usable possibility of the educational App Inventor Program in the field of programming education and to develop programming teaching materials that can overcome limitations of the established programming instruction. The study showed that the learners' motivations were strengthened through smart device programs. Containing the elements of STEAM, the teaching materials were developed for the logical and systematic learning that deals with elementary students' real-life situations, and that helps children follow the procedures of software development. By introducing the Waterfall Model to the process of programming, students are able to follow the software developers' thinking process. In addition, beyond the simplistic programming language and simply acquiring related knowledge, the App Inventor programming was designed to enhance students' higher-order thinking skills such as creativity, problem solving ability, collaborative thinking, and so forth.

• Journal of Radiation Protection and Research
• /
• v.34 no.4
• /
• pp.176-183
• /
• 2009

Maintenance on the water chamber of steam generator during outage in nuclear power plants (NPPs) has a likelihood of high radiation exposure to whole body of workers even short time period due to the high radiation exposure rates. In particular, it is expected that hands would receive the highest radiation exposure because of its contact with radiation materials. In this study, characteristic analysis of inhomogeneous radiation fields for contact operations was conducted using thermoluminescent dosimeter (TLD) readouts from the application tests of two-dosimeter algorithm to Korean NPPs in 2004. It is regarded that inhomogeneous radiation fields for contact operations in NPPs are dominated by high energy photons. In addition, field tests for workers who participated in maintenance on the steam generator during outage at Ulchin NPPs in 2009 and pressure tube replacement at Wolsong NPPs in 2009 were conducted to analyze radiation fields and to estimate the extremity dose. As a result, radiation fields were dominated by high energy photons.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.1051-1056
• /
• 2014

After hot rolling, a high-temperature steel plate with a temperature higher than $800^{\circ}C$ is rapidly cooled by multiple circular water jets. In this cooling process, because the temperature of the steel plate is much higher than the boiling point of the cooling water, film-boiling heat transfer occurs and a very thin steam layer forms between the plate surface and the cooling water. The steam layer acts as a thermal resistance that prevents heat transfer between the cooling water and the steel plate. In addition to the film-boiling heat transfer, complex physical phenomena such as the free-surface flow of residual water that accumulated on the material and the material's high-speed motion also occur in the cooling process. In this study, the simultaneous cooling process of the upper and lower sides of a running hot steel strip is investigated using a three-dimensional numerical model and the cooling performances and characteristics of the upper-side cooling and lower-side cooling are compared.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.527-535
• /
• 2021

The STEAM education was applied to science high school students, and changes in perceptions of students and teachers were investigated after class treatment. By the results of the student's perception survey, very positive results were found in increasing problem-solving capabilities, educational satisfaction, etc. More than 98% of students said they would continue to participate in STEAM education classes. Meanwhile, the lack of time for class activities put a burden on students to complete the problems during class. Especially nanoscience content and activities were properly organized in consideration of the level of cognitive development of the students. In addition, as a result of a survey of teachers' perceptions for students, more than 80.0% of teachers responded very positively in 'self-directed learning ability' and 'problem-solving capability', etc.

• Journal of the Korean Institute of Gas
• /
• v.27 no.1
• /
• pp.78-85
• /
• 2023

Fixed-bed reactor Computational Fluid Dynamics (CFD) simulation of methanol steam reforming reaction was performed using the intrinsic kinetic data of the copper-impregnated hydrotalcite catalyst. The activation energy of the copper hydrotalcite catalyst obtained from the previous study results was 97.4 kJ/mol, and the pre-exponential was 5.904 × 10¹⁰. Process simulation was performed using the calculated values and showed a similar tendency to the experimental results. And the conversion rate according to the change of the reaction temperature (200 - 450 ℃) and the molar ratio of methanol and water was observed using the intrinsic kinetic data. In addition, mass and heat transfer phenomena analysis of a commercial reactor (I.D. 0.05 - 0.1m, Length 1m) was predicted through axial 2D Symmetry simulation using the power law model of the above kinetic constants.

• Journal of the Korean Burn Society
• /
• v.22 no.2
• /
• pp.49-52
• /
• 2019

Purpose: Little information has been published regarding minor burn injuries in infants, most of which are preventable. To fill this research gap, this study explored the patterns and mechanisms of burn injuries in infants to ascertain whether such incidents can be prevented. Methods: This was a retrospective study, based on data collected prospectively from all infants (<12 months old) admitted to our hospital with burns in the four-year period between January 1, 2015 and December 31, 2018. A medical record review provided basic demographic information, such as age at the time of injury, sex, cause of injury, duration of treatment, operative treatment, and the extent and type of burn, as well as the anatomical region involved. Results: Fifty-seven infants were diagnosed with burn injuries, with scalding being the most common type (47%), followed by contact (32%) and steam (14%). Seven infants of eight steam burn patients injured by pressure cooker. Superficial second degree was the most common depth of injury (72%) followed by first degree (17%) and deep second degree (8%). Average age per injury type was calculated by independent T-test. Average ages of patients with contact and steam burns were significantly lower (7.06 months; P=0.19) and higher (9.25 months; P=0.005), respectively, than for other burn types. Conclusion: Given that infants cannot control their body movements, talk, or manage by themselves, they are entirely dependent on the proper care of adults. Consequently, in addition to the prevention of burns, special care should be taken for the pressure cooker.

• Journal of Animal Science and Technology
• /
• v.65 no.5
• /
• pp.971-988
• /
• 2023

This study evaluated the effects of supplementing solubles from shredded, steam-exploded pine particles (SSPP) on growth performances, plasma biochemicals, and microbial composition in broilers. The birds were reared for 28 days and fed basal diets with or without the inclusion of SSPP from 8 days old. There were a total of three dietary treatments supplemented with 0% (0% SSPP), 0.1% (0.1% SSPP) and 0.4% (0.4% SSPP) SSPP in basal diets. Supplementation of SSPP did not significantly affect growth or plasma biochemicals, but there was a clear indication of diet-induced microbial shifts. Beta-diversity analysis revealed SSPP supplementation-related clustering (ANOSIM: r = 0.31, p < 0.01), with an overall lower (PERMDISP: p < 0.05) individual dispersion in comparison to the control group. In addition, the proportions of the Bacteroides were increased, and the relative abundances of the families Vallitaleaceae, Defluviitaleaceae, Clostridiaceae, and the genera Butyricicoccus and Anaerofilum (p < 0.05) were significantly higher in the 0.4% SSPP group than in the control group. Furthermore, the linear discriminant analysis effect size (LEfSe) also showed that beneficial bacteria such as Ruminococcus albus and Butyricicoccus pullicaecorum were identified as microbial biomarkers of dietary SSPP inclusion (p < 0.05; | LDA effect size | > 2.0). Finally, network analysis showed that strong positive correlations were established among microbial species belonging to the class Clostridia, whereas Erysipelotrichia and Bacteroidia were mostly negatively correlated with Clostridia. Taken together, the results suggested that SSPP supplementation modulates the cecal microbial composition of broilers toward a "healthier" profile.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.20 no.1
• /
• pp.16-24
• /
• 2024

Denting of steam generator (SG) tube is defined as the reduction in tube diameter due to the stresses exerted by the corrosion products formed on the outer diameter surface. This phenomenon is mostly observed in the crevices between SG tube and the top-of tubesheet or tube support plate. Despite the replacement of SG tube with Alloy 690, which has better corrosion resistance than Alloy 600, the denting of SG tube still remains a potential problem that could decrease the SG integrity. Deformation of SG tube by denting phenomenon can affect the surface properties and microstructure of SG tube. In this study, the effects of plastic deformation on surface properties and microstructure of Alloy 690 thermally treated (TT) tube was investigated by using the various analysis techniques. The plastic deformation of Alloy 690 increased the surface roughness and area. Many surface defects such as ripped surface and micro-cracks were observed on the deformed Alloy 690TT specimen. Based on the electron backscatter diffraction analysis, the dislocation density of deformed SG tube increased compared to non-deformed SG tube. In addition, the effects of changes in surface properties and microstructure of SG tube on general corrosion behavior were discussed.