• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1888-1893
• /
• 1991

Systematic design of a controller for a water temperature system was considered, with the intention of devising an accurate control experiment. The results of an experiment using a water temperature system based on the pole placement regulator showed water temperature oscillation and steady state error. This paper proposed a. method for eliminating both the oscillation and the steady state error. The oscillation was eliminated by a drive delay compensation technique, in which a future state value of the system was predicted through a real time computer simulation. The steady state error was eliminated by an steady state error correction technique, in which an actual steady state heatrate in the system model was replaced by an imaginary heatrate. By combining these two techniques, we obtained an experimental result for water temperature control of 0.01 (.deg. C) accuracy. Furthermore, the proposed method was evaluated relatively by comparing the experimental results using several other methods and proved to be the most accurate and convenient control method for the delay system.

• 전력전자학회논문지
• /
• 제27권4호
• /
• pp.339-347
• /
• 2022

This study proposes the mitigation method for overcurrent and oscillation motor current in an active short-circuit operation. This operation is attracting attention as the safe state of electric vehicle traction inverters. However, the active short-circuit operation generates oscillation and overcurrent of motor currents during a transient state. The proposed method uses two different safe states in PMSM, such as active short circuit and freewheeling. The active short circuit is used for safe state in a steady state. To reduce the overshoot and oscillation, a freewheeling state is injected between active short-circuit operation by comparing the motor phase current with an analytically calculated steady-state motor current. Freewheeling state is only used in a transient state. The performance is demonstrated through simulations and experimental results. The peak current of the motor was reduced from 52 A to 40 A, and oscillation time was reduced.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권3호
• /
• pp.140-151
• /
• 2004

This paper presents the HVDC system modelling for analysis of subsynchronous oscillation and the design of the subsynchronous oscillation damping controller in HVDC system with the aid of novel eigenvalue analysis program. The HVDC system models include both the steady-state model for power flow calculation and the dynamic model for constructing the state matrix. The design procedures of the subsynchronous oscillation damping controller (SODC), which is integrated with PI controller at rectifier, consist of three steps:1) to identify the dominant torsional oscillation mode in the AC/DC system;2) to determine the parameters of the SODC for compensating the phase lagging due to the rectifier controller;3) to validate the control parameters and to determine the appropriate gain using a time-domain simulation program. The proposed design method has been tested against two AC/DC systems for validation.

• Journal of Korean Vacuum Science & Technology
• /
• 제6권1호
• /
• pp.43-45
• /
• 2002

We have theoretically investigated steady-state carrier transport and current self-oscillation in negative-effective-mass (NEM) p$\^$+/pp$\^$+/diodes. The current self-oscillation here is a result of the formation and traveling of electric field domains in the p base having a NEM. The dependence of self-oscillating frequency on the applied dc voltage is obtained by detailed numerical simulations. In the calculations, we have considered the scatterings by carrier-impurity, carrier-acoustic phonon, carrier-polar-phonon, and carrier-nonpolar-phonon-hole interactions . This kind of NEM oscillator allows us to reach a current oscillation with terahertz frequency, thus it may be used as a broadband source of terahertz radiation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.150-151
• /
• 2017

This paper deals with the suppression of subharmonic current oscillation of V/F controlled high speed induction motor drive in turbo blower applications. High speed induction motor has a relatively low stator impedance for high speed operation and therefore the dc link voltage ripple may result in subharmonic current oscillation at the steady state in high speed operation. This paper shows that the subharmonic oscillation is caused by the dc link voltage ripple and also proposes the suppression method, which generates the compensation voltage through the proportional current controller to reduce the subharmonic current oscillation. The simulation and experimental results show that the proposed suppression method reduces the subharmonic current oscillation to the acceptable low level in turbo blower applications.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.461-467
• /
• 1998

In spite of significant nonlinearities even in the simplest model, some types of steady-state and dynamic behavior common for nonlinear systems have never been associated with distillation columns. In recent years, multiplicity of steady states has been a subject of much research and is now widely accepted. Subsequently, stability of steady states has been explored. Another phenomenon that. although widely observed in chemical reactors, has not been associated with models of distillation columns is the existence of periodic oscillations. In this article we study the steady-state and dynamic behavior of the azeotropic distillation of the ternary homogeneous system methanol-methyl butyrate-toluene. Our simulations reveal nonlinear behavior not reported in earlier studies. Under certain conditions, the open-loop distillation system shows a sustained oscillation associated with branching to periodic solutions. The limit cycles are accompanied by traveling waves inside the column. Significant underdamped oscillations are also observed over a wide range of product rates.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.224-228
• /
• 2005

동적 감쇠자로서 백홀에 대한 동적 제어 테스트를 수행하였다. 공급라인에서 압력 섭동에 의해 발생되는 가진과 스월 인젝터의 내부 파동 분석을 위해 수력학적 진동발생기와 1차원 가시화 모델 인젝터가 제작되었다. 음향학적 대신에 동적 감쇠자로서 백홀의 영향에 초점을 두었기 때문에 액막의 분열길이와 액막 두께를 측정하여 정상 상태와 가진 상태의 결과를 비교하였다.

• Journal of information and communication convergence engineering
• /
• 제8권2호
• /
• pp.159-162
• /
• 2010

This paper presents a new Kurtosis driven Variable Step-Size Normalized Least Mean Square (KVSSN-LMS) algorithm to prevent repeater from oscillation due to feedback signal of radio frequency (RF) repeater. To get better Mean Square Error (MSE) performance, step-size is adjusted using the kurtosis. The proposed algorithm shows the better performance of steady state MSE. The proposed algorithm shows a better ERLE performance than that of KVSS-LMS, VSS-NLMS, NLMS algorithms.

• 한국분무공학회지
• /
• 제12권1호
• /
• pp.1-10
• /
• 2007

The low frequency combustion instability phenomena generated by pressure drop oscillation such as propellant shake in feed line are studied. To generate the flowrate oscillation by the pressure pulsation up to 400Hz without flow discontinuities and cavitations, a hydrodynamic mechanical pulsator of rotating disk type was produced. Injection pressure conditions are 5, 7 and 9 bar and pressure fluctuation frequency conditions are 0, 4, 6 and 8 Hz. When the injection pressure was oscillated by a mechanical pulsator, the spray shape was pulsated regularly. During the pulsated state of the spray with a mechanical pulsator, the spray characteristics, such as spray angle and liquid film thickness in orifice exit, were measured and compared with those in steady state without a mechanical pulsator. Though the mean injection pressure was fixed in the steady and fluctuating state, there were some differences in all measured values, i.e. liquid film thickness and spray cone angle, between both states.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1986년도 하계학술대회논문집
• /
• pp.609-613
• /
• 1986

The resonance frequency and the gain for oscillation of external cavity diode lasers are derived by approximating the phase and the gain conditions. By modifying single mode rate equations for the external cavity diode laser, steady state solutions and their stability are studied.