• Journal of Chest Surgery
• /
• v.48 no.5
• /
• pp.311-317
• /
• 2015

Background: Robotic surgery is an alternative to minimally invasive surgery. The aim of this study was to report on current trends in robotic thoracic and cardiovascular surgical techniques in Korea. Methods: Data from the National Evidence-based Healthcare Collaborating Agency (NECA) between January 2006 and June 2012 were used in this study, including a total of 932 cases of robotic surgeries reported to NECA. The annual trends in the case volume, indications for robotic surgery, and distribution by hospitals and surgeons were analyzed in this study. Results: Of the 932 cases, 591 (63%) were thoracic operations and 340 (37%) were cardiac operations. The case number increased explosively in 2007 and 2008. However, the rate of increase regained a steady state after 2011. The main indications for robotic thoracic surgery were pulmonary disease (n=271, 46%), esophageal disease (n=199, 34%), and mediastinal disease (n=117, 20%). The main indications for robotic cardiac surgery were valvular heart disease (n=228, 67%), atrial septal defect (n=79, 23%), and cardiac myxoma (n=27, 8%). Robotic thoracic and cardiovascular surgeries were performed in 19 hospitals. Three large volume hospitals performed 94% of the case volume of robotic cardiac surgery and 74% of robotic thoracic surgery. Centralization of robotic operation was significantly (p<0.0001) more common in cardiac surgery than in thoracic surgery. A total of 39 surgeons performed robotic surgeries. However, only 27% of cardiac surgeons and 23% of thoracic surgeons performed more than 10 cases of robotic surgery. Conclusion: Trend analysis of robotic and cardiovascular operations demonstrated a gradual increase in the surgical volume in Korea. Meanwhile, centralization of surgical cases toward specific surgeons in specific hospitals was observed.

• Journal of the Korean Society for information Management
• /
• v.32 no.3
• /
• pp.199-219
• /
• 2015

This study aims to illustrate the current status and changes of interlibrary loan service in Korea. Transaction data of KERIS Interlibrary Loan (ILL) Service from 2004 to 2014 were analyzed and key findings include the following: 1) In case 4 year college libraries, there is a close correlation between requests and responses in the interlibrary loan, but there is none for other type of libraries. 2) Social science and literature were the most responded subject area of interlibrary loan materials. In the aspect of language, responses for English materials occupied almost half of all responses. 3) 60 percent of libraries, the number of outgoing requests exceeded the number of their responses to incoming requests. 4) After 2012, KERIS ILL service showed a steady progress in all aspects.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1066-1071
• /
• 2005

This paper presents the two lossless auxiliary inductors-assisted voltage source type half bridge (single ended push pull: SEPP) series resonant high frequency inverter for induction heated fixing roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimental ones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proved from the practical point of view.

• The Korean Journal of Community Living Science
• /
• v.26 no.4
• /
• pp.647-659
• /
• 2015

This study analyzes current technologies in personal protective equipment (PPE) and mechanisms that can be used in the agricultural field to provide data for research and development on PPE for farmers. There is growing awareness of the importance of PPE as part of efforts to reduce agricultural accidents, but data remain rare for developing PPE tailored to the farm work environment. In this regard, patent data on PPE can provide useful insights for facilitating relevant technologies and research. This study examines patents and utility models classified under the IPC code in Korea and other countries to analyze patented technologies and recent trends for the period from January 2003 to October 2014. Here Korea, the U.S., Japan, and Europe were considered. The results show that the number of patent applications for PPE remained steady without any sharp fluctuations. KIPO applications accounted for 43.5% of all cases, reflecting the highest proportion among the countries considered. Domestic applicants accounted for 94% of all cases. In Korea, patent applications were concentrated in safety gear for the face and eyes, indicating a high level of technology. The highest level of competition was observed for safety goggles in all countries. Some PPE technologies were dominated by a particular manufacturer. The analysis results for farming-related technologies show the current state of technologies and areas lacking technological development. This study analyzes patented technologies for PPE in Korea and other countries and recent research trends as part of the effort to develop PPE for workers in the farming and livestock industry. This study represents an early-stage effort to develop PPE for workers in the farming and livestock industry, and the results are expected to be useful for tailoring PPE to Korea's farming and livestock environment.

• Journal of the Korean Chemical Society
• /
• v.18 no.6
• /
• pp.400-407
• /
• 1974

Steady-state anodic and cathodic polarization curves were developed for the Al electrode in 60 mole %$AlCl_3$-40 mole % NaCl at $180^{\circ}C$$453^{\circ}K$). Ohmic resistance contributed substantially to the anodic polarization at current densities greater than 50 mA/$CM^2$ even with capillary tip placed close to the electrode. This could not be rationalized from the resistivity of the melt, which would lead to a much smaller polarization. It was therefore concluded that a layer of high resistance $AlCl_3$ (or $AlCl_3$-rich melt) formed close to the anode surface. From the IR-corrected anodic Tafel and Allen-Hickling plots an apparent anodic charge-transfer coefficient of ${\alpha}_a$ = (2.3 RT/F)(d log i/d${\eta}$) = $1.5{\pm}0.25$ was obtained. At cathodic current densities greater than approximately 30 mA/$cm^2$, slow ion diffusion and dendrite growth both interfered with the measurement of kinetic parameters.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.803-813
• /
• 2020

This paper presents a high efficiency resonant flyback converter using a single-chip microcontroller. The proposed converter primary performs the resonant switching by applying the asymmetrical pulse-width modulation (APWM) to the half-bridge power topology. And the converter secondary uses the diode flyback rectifier as its power topology and operates with the zero current switching (ZCS). Thus the proposed converter achieves high efficiency. The total structure of proposed converter is very simple because it uses a single-chip microcontroller and bootstrap circuit for its control and drive, respectively. First, this paper describes the converter operation according to each operation mode and shows its steady-state analysis. And the software control algorithm and drive circuits operating the proposed converter are explained. Then, the operation characteristics of proposed converter are shown through the experimental results of an implemented prototype based on each explanation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.8-14
• /
• 2007

Water quality in Lake Rotorua, New Zealand, deteriorated since the 1960s because of excessive phytoplankton growths due principally to increasing nitrogen and phosphorus in the lake waters. Nutrient concentrations in eight of the nine major streams feeding Lake Rotorua have increased since 1965. The groundwater system has a key role in the hydrology of the Lake Rotorua catchment and the groundwater system is probably the control on the time delay between intensification of agricultural land use and response of surface water quality. All major, and many minor streams, in the catchment are fed by springs. Two lithological units are most important to groundwater flow in the Lake Rotorua catchment: Mamaku Ignimbrite, erupted in about 200,000 years ago and Huka Formation sediments which filled the caldera left by the Mamaku Ignimbrite eruption. Rainfall recharge to groundwater in the groundwater catchment of Lake Rotorua is estimated as approximately 17300 L/s. A calibrated steady-state groundwater flow model estimates that approximately 11100 L/s of this flow discharges into streams and then into the lake and the balance travels directly to Lake Rotorua as groundwater discharge through the lake bed. Land use has impacted on groundwater quality. Median Total Nitrogen (TN) values for shallow groundwater sites are highest for the dairy land use (5.965 mg/L). Median TN values are also relatively high for shallow sites with urban-road and cropping land uses (4.710 and 3.620 mg/L, respectively). Median TN values for all other uses are in the 1.4 to 1.5 mg/L range. Policy development for Lake Rotorua includes defining regional policies on water and land management and setting an action plan for Lake Rotorua restoration. Aims in the action plan include: definition of the current nutrient budget for Lake Rotorua, identification of nutrient reduction targets and identification of actions to achieve targets. Current actions to restore Lake Rotorua water quality include: treatment of Tikitere geothermal nitrogen inputs to Lake Rotorua, upgrade of Rotorua City sewage plant, new sewage reticulation and alum dosing in selected streams to remove phosphorus.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.1 no.1
• /
• pp.22-30
• /
• 1989

Wave propagation is changed by the effect of shoaling, current-depth refraction and shelter-ing etc. To solve these problems. numerous models have been developed. In the present study, a coordinate system is proposed based on the wave ray equation with the wave number equation including diffraction effects . The governing equation for the study was derived from the mild slope wave equation in non-steady state, including current effects (Kirby, 1986a) and trans-formed into an orthogonal curvilinear coordinate system on the basis of the wave ray equation. To obtain a numerical solution, an explicit finite difference scheme was used, and solved by the relaxation method. This model was tested for various cases: Firstly a submersed circular shoal and a constant unit depth. Secondly a submerged elliptic shoal on a slope, and finally a breakwater harbour with obliquely incident waves on a slope. The model was found to simulate the experimental results and other theoretical results in wave height and wave angle fairy well, and the applicability of the model around an arbitrary shaped coastal structure was also verified. To demonstrate the general usefullness of the present approach , the model is to be applied to a field situation with a complex bed topography.

• The Korean Journal of Pharmacology
• /
• v.32 no.2
• /
• pp.283-292
• /
• 1996

The spinal dorsal horn is the area where primary afferent fibers terminate and cutaneous sensory information is processed. A number of putative neurotransmitter substances, including excitatory and inhibitory amino acids and peptides, are present in this region. In this study, single neurons of the spinal dorsal horn were acutely isolated and the properties of whole cell current and responses to excitatory and inhibitory neurotransmitters were studied by patch clamp technique. Transverse slice ($(300{\mu}m$) of lumbar spinal cords from young rats$(7{\sim}14\;days)$ were sequentially treated with two pretenses(pronase 0.75 mg/ml and thermolysin 0.75 mg/ml), then single neurons were mechanically dissociated. These neurons showed near-intact morphology such as multipolar, ellipsoidal and bipolar, and pyramidal cells and we recorded the typical whole cell currents of $K^+$, $Ca^{2+}$ and ligand-operated channels from these neurons. Glutamate $(30{\mu}M)$ and N-methyl-D-aspartate(NMDA, $30{\mu}M)$ induced inward currents of $117{\pm}12.4$ pA(n=5) and $49{\pm}6.9$ pA(n=3), respectively. Glycine $(1{\mu}M)$ potentiated glutamate-induced currents $4{\sim}5$ times and NMDA-induced currents $8{\sim}10$ times. In addition, glycine $(30{\mu}M)$ induced Inward current ($31{\pm}6.1$ nA, n=2), which was rapidly desensitized after the peak to a new steady-state level. However, the inward currents induced by ${\gamma}-amino$ butyric acid(GABA, $1{\mu}M$) decreased continuously after the peak($226{\pm}41.6$ pA, n=3) under the similar experimental condition. The ionic currents and pharmacological responses of isolated neurons in this work were similar to those observed in vivo or in vitro spinal cord slice, indicating that acutely isolated neurons could be effectively used for further pharmacological studies.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.273-277
• /
• 2012

The vacuum drying process for drying of paper in current transformers was modeled with an aim to develop an understanding of the drying mechanism involved and also to predict the water collection rates. A molecular as well as macroscopic approach was adopted for the prediction of drying rate. Ficks law of diffusion was adopted for the prediction of drying rates at macroscopic levels. A steady state and dynamic mass transfer simulation was performed. The bulk diffusion coefficient was calculated using weight loss experiments. The accuracy of the solution was a strong function of the relation developed to determine the equilibrium moisture content. The actually observed diffusion constant was also important to predict the plant water removal rate. Thermo gravimetric studies helped in calculating the diffusion constant. In addition, simulation studies revealed the formation of perpetual moisture traps (loops) inside the CT. These loops can only be broken by changing the temperature or pressure of the system. The change in temperature or pressure changes the kinetic or potential energy of the effusing vapor resulting in breaking of the loop. The cycle was developed based on this mechanism. Additionally, simulation studies also revealed that the actual mechanism of moisture diffusion in CT's is by surface jumps initiated by surface diffusion balanced against the surrounding pressure. Every subsequent step in the cycle was to break such loops. The effect of change in drying time on the electrical properties of the insulation was also assessed. The measurement of capacitance at the rated voltage and one third of the rated voltage demonstrated that the capacitance change is within the acceptance limit. Hence, the new cycle does not affect the electrical performance of the CT.