• The Journal of Engineering Geology
• /
• v.11 no.3
• /
• pp.255-267
• /
• 2001

A comparison study is performed to understand the coupling behavior of the thermal, hydraulic, and mechanical interactions in the vicinity of an underground radwaste repository, assumed to be located at a depth of 500 m, within a granitic rock mass with a 58$^{\circ}$ dipping fault passing through the roof-wall intersection of the repository cavern. The two dimensional universal distinct element code, UDEC is used for the analysis. The model includes a granitic rock meas, a canister with PWR spent fuels surrounded by the compacted bentonite inside a deposition hole, and the mixed bentonite backfilled in the rest of the space within a repository cavern. The coupling behavior of hydromechanical, thermomechanical, and thermohydromechanical interaction has been studied and compared. The effect of the time-dependent decaying heat, from the radioactive materials in PWR spent fuels, on the repository and its surroundings has been studied. A steady state flow algorithm is used for the hydraulic analysis.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.234-235
• /
• 2011

계통에 대규모의 풍력발전의 투입양이 증가함에 따라 실효치 기반의 해석이 필요하다. 계통 내에 무효전력 불균형에 의한 풍력 발전의 한계량을 결정하기 위하여 연속조류법을 이용한 한계량 선정 알고리즘을 수립하였다. 이를 위하여 풍력발전단지를 등가화하고, 타입에 따른 풍력발전기의 정적 모델을 수립하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.209-214
• /
• 2004

Time Domain Reflectometry with multiplex system has been installed to configure the spatial and temporal characteristics of soil moisture in a mountainous hillslope. An intensive surveying was performed to build a refined digital elevation model and flow determination algorithms with inverse surveying have been applied to establish an efficient soil monitoring system. Steady state wetness index, quasi-dynamic wetness index and fully dynamic wetness index have been calculated. Continuous monitoring of soil moisture data were analyized with wetness indices. Limitations and hydrological interpretations of this approach have beer discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1127-1132
• /
• 1991

Pneumatic control system has been used mainly for endpoint position control because of the compressibility, viscosity and low output stiffness of air which causes nonlinear flow characteristics. In this paper, pneumatic position control algorithms using fuzzy rule were developed to achieve faster and more stable response than conventional PI control algorithm. The performances of the proposed algorithms were compared by computer simulations with them of PI controller. From those simulations it was shown that the proposed algorithms are more efficient about settling time, steady state error and overshoot than PI control algorithm.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.35-42
• /
• 1998

Time marching algorithms applied to compressible Navier-Stokes equation have a convergence problem at low Mach number. It is mainly due to the eigenvalue stiffness and pressure singularity as Mach number approaches to zero. Among the several methods to overcome the shortcomings of time marching scheme, time derivative preconditioning method have been used successfully. In this numerical analysis, we adopted a preconditioner of K.H. Chen and developed a two-dimensional, axisymmetric Navier-Stokes program. The steady state driven cavity flow and backward facing step flow problems were computed to confirm the accuracy and the robustness of preconditioned algorithm for low Mach number flows. And the transonic and supersonic flows insice the JPL axisymmetric nozzle internal flow is exampled to investigate the effects of preconditioning at high Mach number flow regime. Test results showed excellent agreement with the experimental data.

• Journal of computational fluids engineering
• /
• v.6 no.2
• /
• pp.22-31
• /
• 2001

The two-dimensional unsteady incompressible viscous flow behind rectangular bluff bodies between two parallel plates was analyzed numerically. The steady state flow and the vortex flow behind rectangular bluff bodies in the channel were investigated for two regimes i.e., the laminar(Re = 100, 300, 500) and the turbulent flows(Re = 10⁴∼10/sup 6/). The vortex shedding was generated by a physical disturbance(6%) numerically imposed at the rear of the bluff bodies for a short time. It was observed that the perturbed flow became periodic after a transient period. And in the case of unsteady inflow, the sinusoidal pulsatile flow was applied as the inlet condition in the turbulent flow of Reynolds number of 1.0×10/sup 5/. FLUENT code was employed to solve the problems. The power-law scheme was used to get stable linearized equations and the PISO algorithm was applied to finding the solution of them.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.12
• /
• pp.549-554
• /
• 2006

Available transfer capability(ATC) is an important indicator of the usable amount of transmission capacity accessible by several parties for commercial trading in power transaction activities. This paper deals with an application of optimization technique for available transfer capability(ATC) calculation and analyzes the results of ATC by considering several constraints. Especially several optimization techniques are used to solve the ATC problem with state-steady security constraints. The results are compared with that of repeat power flow(RPF), sequential quadratic programming(SQP) and linear programming(LP). The proposed method is applied to 10 machines 39 buses model systems to show its effectiveness.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.3
• /
• pp.44-52
• /
• 2004

In this study, a component map generation method using experimental data and the genetic algorithms are newly proposed. In order to generate the performance map for components of this engine, after obtaining engine performance data through many experimental tests, and then the third order equations which have relationships the mass flow function the pressure ratio and the isentropic efficiency as to the engine rotational speed were derived by using the genetic algorithms. A steady-state performance analysis was performed with the generated maps of the compressor by the commercial gas turbine performance analysis program GASTURB. In comparison, it was found that the component maps can be generated from the experimental test data by using the genetic algorithms, and it was confirmed that the analysis results using the generated maps were very similar to those using the scaled maps from the GASTURB.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.195-200
• /
• 2004

In this study, a component map generation method using experimental data and the genetic algorithms are newly proposed. In order to generate the performance map for components of this engine, after obtaining engine performance data through many experimental tests, and then the third order equations which have relationships the mass flow function the pressure ratio and the isentropic efficiency as to the engine rotational speed were derived by using the genetic algorithms. A steady-state performance analysis was peformed with the generated maps of the compressor by the commercial gas turbine performance analysis program GASTURB(1). In comparison, it was found that the component maps can be generated from the experimental test data by using the genetic algorithms, and it was confirmed that the analysis results using the generated maps were very similar to those using the scaled maps from the GASTURB.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.1
• /
• pp.50-57
• /
• 2002

A substantial portion of power system load is made of large induction motors. Accordingly, static and dynamic simulation of induction motors are very important in the power flow and transient stability analysis. The purpose of this paper is to report the development of load modeling for induction motor using the steady-state equivalent circuit. A proposed simulation model of induction motor lets simulation under wide range varying voltages and frequencies be very easy and exact. This paper is presented through a case study, and its feasibility is demonstrated via simulation and experiments.