• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권4호
• /
• pp.255-261
• /
• 2004

This paper presents an improved droop method which minimizes the voltage droop of a parallel-connected power supply Conventionally, the droop method has been used to achieve a simple structure and no-interconnections among power sources. However, it has a trade-off between output voltage regulation and load sharing accuracy In this paper, the droop is minimized with a current and droop gain control using steady-stage estimation. The proposed method can achieve both good voltage regulation and good load sharing. A design example of two 10㎸, 100㎃ parallel modules is made and tested to verify the proposed current-sharing method.

• 한국시스템다이내믹스연구
• /
• 제11권1호
• /
• pp.27-57
• /
• 2010

This article deals with an ecological-economic analysis of the 'Pasture Project of Kum River', which is the farming plan of mitten crabs using Jichun, a stream of the River Kum where the natural propagation of mitten crabs are blocked because of the estuary dam constructed in 1990. Toward analyzing the ecological and economic effects of the crab releasing and harvesting activities in Jichun, a two-stage cohort model of population dynamics with cannibalistic behaviors and density restrictions in biomathematics is adopted, despite of the current infertility in Kum, considering the opportunity of establishing dam fishways in the near future. This study moreover presents a method of parameter estimation especially with assuming a steady state of the ecosystem, and performs various analyses such as the risk measurement of climate change and the economic value of such fishways.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.174-178
• /
• 2001

An improved stationary frame-based digital current control technique for a permanent magnet (PM) synchronous motor is presented. Generally, the stationary frame current controller is known to provide the advantage of a simple implementation. However, there are some unavoidable limitations such as a steady-state error and a phase delay in the steady-state. On the other hand, in the synchronous frame current regulator, the regulated currents are dc quantities and a zero steady-state error can be obtained through the integral control. However, the need to transform the signals between the stationary and synchronous frames makes the implementation of a synchronous frame regulator complex. Although the PI controller in the stationary frame gives a steady-state error and a phase delay, the control performance can be greatly improved by employing the exact decoupling control inputs for the back EMF, resulting in an ideal steady-state control characteristics irrespective of an operating condition as in the synchronous PI decoupling controller. However, its steady-state response may be degraded due to the inexact cancellation inputs under the parameter variations. To improve the control performance in the stationary frame, the disturbance is estimated using the time delay control. The proposed scheme is implemented on a PM synchronous motor using DSP TMS320C31 and the effectiveness is verified through the comparative simulations and experiments.

• Journal of Power Electronics
• /
• 제1권2호
• /
• pp.88-98
• /
• 2001

An improved stationary frame-based digital current control technique for a permanent magnet(PM) synchronous motor is presented. Generally, the stationary frame current controller is known to provide the advantage of a simple implementation. However, there are some unavoidable limitations such as a steady-state error and a phase delay in the steady-state. On the other hand, in the synchronous frame current regulator the regulated currents are dc quantities and a zero steady-state error can be obtained through the integral control. However, the need to transform the signals between the stationary and synchronous frames makes the implementation of a synchronous frame regulator complex. Although the PI controller in the stationary frame gives a steady-state error and a phase delay, the control performance can be greatly improved by employing the exact decoupling control inputs for the back EMF., resulting in an ideal steady-state control characteristics irrespective of an operating condition as in the synchronous PI decoupling controller. However, its steady-state response may be degraded due to the inexact cancellation inputs under the parameter variations. To improve the control performance in the stationary frame, the disturbance is estimated using the time delay control. The proposed scheme is implemented on a PM synchronous motor using DSP TMS320C31 and the effectiveness is verified through the comparative simulations and experiments.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 추계학술대회 학술발표 논문집 제14권 제2호
• /
• pp.21-25
• /
• 2004

This paper suggests the techniques in determining the values of the steady-state equivalent circuit parameters of a three-phase squirrel-cage induction machine using immune algorithm. The parameter estimation procedure is based on the steady state phase current versus slip and input power versus slip characteristics. The proposed estimation algorithm is of a nonlinear kind based on clonal selection in immune algorithm. The machine parameters are obtained as the solution of a minimization of least-squares cost function by immune algorithm. Simulation shows better results than the conventional approaches.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1067-1075
• /
• 2016

This paper presents an adaptive observer-based approach to estimate voltage parameters, including frequency, amplitude, and phase angle, for single-phase power systems. In contrast to most existing estimation methods of grid voltage parameters, in this study, grid voltage is treated as a dynamic system related to an unknown grid frequency. Based on adaptive observer theory, a full-order adaptive observer is proposed to estimate voltage parameters. A Lyapunov function-based argument is employed to ensure that the proposed estimation method of voltage parameters has zero steady-state error, even when frequency varies or phase angle jumps significantly. Meanwhile, a reduced-order adaptive observer is designed as the simplified version of the proposed full-order observer. Compared with the frequency-adaptive virtual flux estimation, the proposed adaptive observers exhibit better dynamic response to track the actual grid voltage frequency, amplitude, and phase angle. Simulations and experiments have been conducted to validate the effectiveness of the proposed observers.

• International Journal of Aerospace System Engineering
• /
• 제7권1호
• /
• pp.21-27
• /
• 2020

Quasi steady stall is a phenomenon to characterize the aerodynamic behavior of aircraft at high angle of attack region. Generally, it is exercised from a steady state level flight to stall and its recovery to the initial flight in a calm weather. For a theoretical study, such maneuver is demonstrated in the form of aerodynamic model which consists of aircraft's stability and control derivatives. The current research paper is focused on the appropriate selection of aerodynamic model for the maneuver and estimation of the unknown model coefficients using least-square method. The statistical accuracy of the estimated parameters is presented in terms of standard deviations. Finally, the validation has been presented by comparing the measured data to the simulated data from different models.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권1호
• /
• pp.1-9
• /
• 2014

One important measure of performance for a repairable system is steady-state availability. In this paper, a method to estimate and establish confidence interval for the steady-state availability under Weibull lifetime and lognormal repair time distributions is proposed. Also, bias and mean squared error of a point estimator for an availability are investigated. In addition, a procedure to derive the sample size and critical value for availability demonstration test is presented and illustrated with a numerical example.

• 한국항공우주학회지
• /
• 제30권1호
• /
• pp.75-81
• /
• 2002

재진입 제어계에서는 항력가속도의 시간미분을 해석적으로 추정하므로 오차가 발생되기 쉽다. 더구나, 극초음속 영역에서의 정확한 항력계수 추정의 어려움과 스케일 고도의 비현실성도 정상상태오차의 원인이 된다. 우주왕복선의 경우, 제어계에 항력가속도 오차의 적분항을 첨가함으로서 정상상태 오차를 줄이는 방법을 취하였지만 페루프 시스템에 다극점을 갖게 하여 현대적인 제어기 합성에 어려움을 가져다 준다. 그러므로, 본 논문에서는 해석적 계산에 의해서 항력가속도 시간미분에 포함된 오차를 추정하고, 그 추정오차를 이용해 항력가속도 시간미분을 보정함으로써 정상상태 오차를 줄이는 방법인 외란 관측기의 설계를 제안하고자 한다. 결과로는 32개의 기준궤적을 대상으로 대기권 재진입 시스템의 성능을 검증해 본다.

• Advances in aircraft and spacecraft science
• /
• 제5권2호
• /
• pp.187-204
• /
• 2018

The sine sweep base excitation test campaign is a major milestone in the process of mechanical qualification of space structures. The objectives of these vibration tests are to qualify the specimen with respect to the dynamic environment induced by the launcher and to demonstrate that the spacecraft FE model is sufficiently well correlated with the test specimen. Dynamic qualification constraints lead to performing base excitation sine tests using a sine sweep over a prescribed frequency range such that at each frequency the response levels at all accelerometers, load cells and strain gages is the same as the steady state response. However, in practice steady state conditions are not always satisfied. If the sweep rate is too high the response levels will be affected by the presence of transients which in turn will have a direct effect on the estimation of modal parameters. A study funded by ESA and AIRBUS D&S was recently carried out in order to investigate the influence of sine sweep rates in actual test conditions. This paper presents the results of this study along with recommendations concerning the choice of methods.