• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.15-18
• /
• 2001

This paper describes a control scheme for direct torque and flux control of induction machines. The proposed predictive flux control scheme has directly calculated the reference voltage space vector based on flux errors in order to control the torque and flux. This proposed control scheme has not the requirement of a separate current regulator and proportional-integral (PI) control of the flux, torque, and/or current error, thereby improving transient performance and also has the advantage of less torque ripple in steady state with a fixed switching period. The effect of proposed method has been proven by simulations and experiments.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.695-698
• /
• 1992

When the inverter driven Induction motor is compared with sinusoidal voltage driving, the loss is increased and efficiency in the same output is decreased by the time harmonics in inverter output. These are based on the eddy current on stator and the skin effects of rotor bar current induced from time harmonic. The aim of this paper is to estimate the equivalent circuit parameter of squirrel cage induction motor fed from inverter considering this effects.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.59-61
• /
• 2007

This paper presents the characteristic analysis of the 40-kVA high speed synchronous generator considering the field current. The generator consist of the rotor with the short-circuited field coils connected armature coils of exciter and the stator with three-phase winding. To analyze the characteristics of the generator, the direct finite element method is applied.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.72-78
• /
• 2004

In this paper, a development of an inductive position sensor is described. The sensor is similar to a radial magnetic bearing in that the sensor stator is shaped like a heteropolar magnetic bearing and is driven by a switching amplifier. A demodulation filter extracts the gap information from the switching current ripples. A prototype sensor exhibits the resolution of $0.43\mum$ and the dynamic bandwidth of about 800Hz. The dynamic performance can be improved by increasing the switching frequency. However, the eddy current effects become noticeable at high switching frequency, thus limiting the improvement of the bandwidth.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.976-980
• /
• 2004

This paper presents a position sensorless control system of Switched Reluctance Motor (SRM) using neural network. The control of SRM depends on the commutation of the stator phases in synchronism with the rotor position. The position sensing requirement increases the overall cost and complexity. In this paper, the current-flux-rotor position lookup table based position sensorless operation of SRM is presented. Neural network is used to construct the current-flux-rotor position lookup table, and is trained by sufficient experimental data. Experimental results for a 1-hp SRM is presented for the verification of the proposed sensorless algorithm.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.306-309
• /
• 1988

For the purpose of fast response and simplifing system angle control strategy is selected. And the analysis and dynamic performance of a slip frequency controlled current source inverter fed induction motor drive with stator frequency compensation (indirect torque angle control) is investigated. The current control loop including motor is modeled and speed control loop including the frequency compensation is analysed. And transfer function of overal system is simplified. Experimental results are given in support of the analytical procedure.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.635-637
• /
• 2001

The faults of the squirrel cage induction motor is grew increasingly complex as the faults resulting in the shorting of a stator winding and the broken rotor bar or cracked rotor end ring, bearing faults, and so on. The users of electrical machines initially relied on simple protections such as over-current, over-voltage, earth-fault, etc. to ensure safe and reliable operation. but this method cause heavy financial losses and the threat of safety therefore it has now become very important to diagnose faults at there very inception. in this paper, we are going to discuss the detection method of broken rotor bar of squirrel cage induction motor by the motor current signal analysis(MCSA) and the opening terminal voltage signal analysis.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1312-1314
• /
• 2001

This paper presents a constant power controller for doubly-fed. Induction generators used in wind turbines. When the stator side of the generator is connected to the grid, the generated power depends on the rotor current. To control the rotor current based on it's average value, a cost effective SPC (Slip Power Controller) was developed and is ready for testing with an actual 660KW generator system. Experiment results are presented and discussed.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.342-344
• /
• 2006

This paper present a method of current control for torque ripple reduction in brushless dc motor which have a trapezoid back EMF. In such drives the current ripples are generated by motor inductance in stator windings and the back EMF. The ripples suppression techniques that are practically effective in high speed as well as in low speed regions are rarely found. The proposed method here is based on a strategy that the commutation intervals of the incoming ang the outgoing phases can be equalized by a proper PWM control.

• 전기의세계
• /
• v.28 no.3
• /
• pp.72-77
• /
• 1979

The object of this paper is to try to develope Tulular Liner Induction Motor which consists of primary stator that generates traveling magnetic field from the three-phase winding of formed-wound concentric coil, and try to identify the characteristics of starting force. To indentify the theoretical starting force formular we have quoted the conventional Maxwell's basic equation and Poisson's equation which are used in the general machines thereby having obtained the formular of the current with in the conductor and of the air gap magnetic field respectively. General starting force formular is acquired by applying the formular of the current and magnetic field which was theoretically derived above. To this theoretically starting force formula various constants and the values of magnetic flux density resulting from the experimental motor are applied to present theoretically calculated values. Comparing these theoretically caculated values experimentally weighed values, we have proved the validity of theoretical research.