• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.6
• /
• pp.1-7
• /
• 2001

It is very important to test circular motion accuracy of NC machine tools as it affects all other machines machined by them in industries. In this paper, it has become possible to detect errors of linear displacement of radial directions for circle tar motion accuracy test using newly assembled magnetic type of linear scale so called Magnescale ball-bar system. It has also organized computer program systems using tick pulses come out from computer for getting error motion data at colt start time interval in circular motion test on NC lathe. Error data gotten from test is expressed to plots and analysed to numerics by various statistical treatments.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.387-392
• /
• 2002

It is very important to measure linear cycle plane positioning accuracy of NC lathes as they affect those of all other machines machined by them in industries. For example, if the linear cycle plane positioning accuracy of each axes directions is bad, the accuracy of works will be wrong and the change-ability will be bad in the assembly of machine parts. In this paper, computer software systems are organized to measure linear displacements of ATC(Automatic tool changer) of NC lathes using linear scale and time pulses comming out from computer in order to get data at constant time intervals from the sensors. And each sets of error data gotten from the test is expressed to plots by computer treatment and the results of linear cycle plane positioning error motion estimated to numerics by statistical treatments.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.43-48
• /
• 2007

It is important to measure the rotational accuracy of lathe spindle as it affects to the qualities of all machines machined by the lathe using in industries. The bad rotational accuracy of lathe spindle are caused mainly by wearness of the spindle in using and quality of spindle when machining and using low level bearings. It occurs especially in case of lathes because the cutting force acting to work-piece act on one side to the spindle not to both sides symmetrically. Therefore in this study, constructing experimental apparatus for measuring of rotational accuracy by using eddy current type gap sensors AEC5706PS and sensors, s-06LN, data acquisition board DT9834(USB type) and software for data acquisition, DT Measure Foundry ver. 4.0.7 etc., error data acquired in the rotational accuracy test of lathe spindle are analysed in plots and statistical treatments.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.16 no.28
• /
• pp.103-107
• /
• 1993

This paper studies computer programming for the analysis of data obtained by experiments using Orthogonal Arrays. The following items are considered in the computer programming : * significant digits in the computation of Sum of Squares, Mean Squares and Variance Ratios * containing the necessary F-distribution values in the program. * matching the rules of KS A 0021 and 3251 in the digit treatments etc. The running results of ANOVA Table and Pooled ANOVA Table of a fictitious example is added with the parts of a program. It should be mentioned that the main purpose of this paper is in the arousing of the discussion about significant digits concept in the computer programming for various kinds of Statistical Methods.

• Environmental Analysis Health and Toxicology
• /
• v.23 no.4
• /
• pp.231-245
• /
• 2008

Various methods for detecting changes in response behaviors of indicator specimens are presented for monitoring effects of toxic treatments. The movement patterns of individuals are quantitatively characterized by statistical (i.e., ANOVA, multivariate analysis) and computational (i.e., fractal dimension, Fourier transform) methods. Extraction of information in complex behavioral data is further illustrated by techniques in ecological informatics. Multi-Layer Perceptron and Self-Organizing Map are applied for detection and patterning of response behaviors of indicator specimens. The recent techniques of Wavelet analysis and line detection by Recurrent Self-Organizing Map are additionally discussed as an efficient tool for checking time-series movement data. Behavioral monitoring could be established as new methodology in integrative ecological assessment, tilling the gap between large-scale (e.g., community structure) and small-scale (e.g., molecular response) measurements.

• The Korean Journal of Applied Statistics
• /
• v.29 no.4
• /
• pp.729-739
• /
• 2016

Kruskal and Wallis (1952) proposed a nonparametric method to test the differences between more than three independent treatments. This procedure uses rank in mixed sample combined with more than three unlike populations. This paper proposes a the new procedure based on joint placements for a one-way layout as extension of the joint placements described in Chung and Kim (2007). A Monte Carlo simulation study is adapted to compare the power of the proposed method with previous methods.

• Journal of Surface Science and Engineering
• /
• v.32 no.3
• /
• pp.410-415
• /
• 1999

The adhesion strength of sputtered copper films to Inconel substrates has been studied using the scratch test. The effects of substrate treatments before deposition such as chemical or ion bombardment etching were investigated by means of a mean critical load derived from a Weibull-like statistical analysis. It was found that the mean critical load was very weak unless the amorphous layer produced by mechanical polishing on the substrate surface was eliminated. Chemical etching in a nitric-hydrochloric acid bath was shown to have practically no effect on the enhancement of the adhesion. In contrast, the addition in this bath of nickel and copper sulphates allowed removal of the amorphous layer and an increase in the values of the mean critical load. However, it was observed that excessive chemical etching could cancel out the mean critical load enhancement. The results obtained in the case of ion bombardment etching pretreatments could be far higher than those obtained with chemical etching. Moreover, for a sufficiently long period of ion bombardment etching, the adhesion strength was so high that it was impossible to observe evidence of an adhesion failure.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.808-813
• /
• 2005

Effective cost management requires reliable cost estimates at every stage of project development. The primary purpose of this research is to develop systematic modeling procedures and an automatic computing program for infrastructure estimating in the Texas Department of Transportation (TxDOT). The computing system toggles between project input information and segregated district unit prices for highway work item quantity estimates associated with earthwork and landscape, subgrade treatments and base, surface courses and pavement, structures, miscellaneous construction, and lighting, signing, markings and signals. This quantity-based approach was chosen because of the conventional approach lacking of quantity information until primary design is complete.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.507-508
• /
• 2013

International Roughness Index (IRI) has been widely used by state DOTs to quantify pavement smoothness. When pavement condition falls below certain IRI thresholds, corresponding pavement maintenance treatments should be considered for application. Selection of appropriate IRI thresholds is essential to tactical allocation of limited resources to improve the conditions of states' roadway systems. This selection process is often challenging, however, because IRI thresholds are largely determined by Perceived Ride Quality (PRQ), and PRQ differs in each state. In this paper, a framework is proposed to address this problem. Passenger raters will be randomly selected from predetermined geographic locations, and their PRQ ratings collected. Taking this perceived ride data, along with other data collected, a statistical analysis will be conducted to establish the relationship between measured IRI values and PRQ. Appropriate IRI thresholds will then be determined. Once this framework is implemented, state DOTs could make informative maintenance decisions, which are expected to greatly enhance the public perception of pavement conditions in today's challenging economy.

• Journal of Society of Preventive Korean Medicine
• /
• v.19 no.3
• /
• pp.29-43
• /
• 2015

Objective : The purpose of this study was to identify characteristics of patients' self-perceived health in traditional Korean medical facilities. Method : This research was conducted based on the survey on patients whom have visited traditional Korean medical facilities in 2011 by the Ministry of Health and Welfares and Korean Institute for Health and Social Affairs. Using a sample of 3,931 (1,180 male and 2,751 female) outpatients' self-perceived health based on the data from usage and consumption of Korean Medicine. 'Healthy', 'Fair', and 'Poor Health' were used to measure patients' self-perceived health status. The data was analyzed by frequency, t-test, cross correlation analysis and multiple logistics regression analysis using the SPSS program package. Results : Sex(P<0.001), age(P<0.001), marital status(P<0.001), education(P<0.001), employment status(P<0.001), occupation(P<0.001), health insurance(P<0.001) and income level(P<0.0001) showed statistical significance. Main Treatment Facilities(P<0.001), experience of taking Korean medicine(P=0.032), experience of receiving acupuncture treatment(P<0.001), number of visits(P<0.001), medical expense (P=0.005), and subjective health status after the treatments showed statistical significance for Korean herbal medicine(P=0.038), acupuncture (P=0.001), cupping therapy(P=0.006), oriental physiotherapy(P=0.003), and treatment satisfaction(P<0.001). For subjective health status based on suffering disorders in the past three months, the response of poor health was higher in the group suffering recent illnesses. Statistical significance was seen in hypertension (P=0.002), arthritis(P<0.001), lumbar pain(P<0.001), diabetes mellitus(P=0.001), stroke(P<0.001), hwa-byung (P=0.001), gastric disorders(P=0.021), common cold(P<0.001), ankle sprain(P<0.001), muscular injury(P<0.001), lumbar sprain(p=0.009) and fracture(P=0.03). Also the number of diseases during the past three months showed statistical significance(P<0.001). Statistical significance was also seen in Level of knowledge(P<0.001), route of information(P<0.001), reliability of Korean medicine(P=0.003), insurance coverage(P=0.005), medical costs(P<0.001), and future willingness to use Korean medicine(P<0.001). As a result of the multiple logistics regression analysis, risks of subjective poor health statistically increased in female population, elderlies, medicaid beneficiaries, less educated, higher medical expense, and more disorders during the past three months. Conclusion : Patients' self-perceived health status has significant differences with each variables such as sex, age, marital status, education, health insurance, medical expense, number of diseases.