• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.3
• /
• pp.155-166
• /
• 2003

This study was conducted to investigate the dietary behavior and health-related lifestyles of university students in Incheon arear Self administered questionnaires were collected ken 179 food and nutrition major and non-major students. Statistical data analysis was completed using a SPSS v.10.0 program. The results are summarized as follows: The average weight, height, BMI and PIBW of the major and non-major male and female students were 69.89kg, 172.89cm, 23.4 and 106.49 ; 67.27kg, 173.98cm, 22.2 and 101.35 ; 50.61kg, 161.20cm, 19.53 and 92.25 ; 53.77kg, 161.53cm, 20.56 and 97.18, respectively. The breakfast skipping ratio of the subjects were very high, which was mainly due to the reason“lack of time”More than 75% of male students and 61% of female students responded to have lunch at university canteens or restaurants around campus regularly. About 56% of male students and 68% of female students responded to have dinner irregularly, which mainly caused by the reasons“irregularity of lecture”and “appointment with friends”. The ratio of snacks intake of the subjects were high; Ramyun was the snack item taken the most by the male students and fruits and cookies by the female ones. More than 50% male students and 2% of female students were smokers. A half of students dunk alcohol once or twice a week. The dietary behaviors and health-related lifestyles between major and non-major male students tended to be very similar. The major female students showed more health-oriented dietary behaviors in comparison with the non-major ones. Therefore, they should have a major-oriented and practically organized nutritional education program to correct their dietary behaviors and health-related lifestyles fur health.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.1
• /
• pp.12-22
• /
• 2013

This study investigated the recognition and preference of a chicken menu according to the age of adults in the Jeonbuk area. Self-administered questionnaires were collected from 394 adults (male 55.3%, female 44.7%) residing in the Jeonbuk area. Descriptive and comparative statistical data analysis was completed using SPSS v. 12.0. The frequency of consumption of chicken-containing foods for the younger group (20~30 years old) was significantly higher than the frequency of older groups (over 40) (p<0.001). The younger group also consumed chicken food through a delivery service, whereas the older group consumed chicken through delivery and self-cooking. Approximately 50.0% of the older group preferred the chicken leg whereas 38.1% of the younger group preferred the chicken breast (p<0.001). The most highly recognized chicken menu items, among 36 chicken menus, were Samgyetang (2.93), chicken dori-tang (2.93), and fried chicken (2.93). The older group knew about a chicken menu made by traditional cooking much more than the younger group. The most highly preferred chicken menu item was spicy fried chicken (4.18). The preference for Western-style chicken menu (e.g. Cajun chicken salad, chicken sandwich) was significantly higher in the younger group than the older group (p<0.001, p<0.05). Therefore, to develop a new chicken menu, the consideration of favorite chicken parts and an age-based menu is necessary.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.9
• /
• pp.4577-4580
• /
• 2012

Diagnostic and therapeutic strategies of prostate cancer may largely influenced by patients' age at presentation. This study is aimed to evaluate the characteristics, diagnostic and treatment strategies in prostate cancer patients in our centres. A cross-sectional analytic study of prostate cancer data in two main referral cancer centres, Cipto Mangunkusumo General Hospital and Dharmais National Cancer Centre from 1995-2010, was therefore performed. Patients were divided into 2 sub-populations; below 60 years (younger patients) and 75 years old and above (older patients). PSA levels, diagnostic modalities, Gleason score and therapeutic options were analysed for both and compared using bivariate analysis. 152 patients were <60 years and 210 were ${\geq}75$ years. There was no statistical difference in mean PSA level (797.9ng/mL vs 345.3 ng/mL, respectively; p>0.05) and diagnosis was made by biopsy in majority of patients in both groups (68.2% and 71.6% in younger and older groups respectively). Most presented with an advanced disease stage (65.1% and 66.0%, respectively) and there was no statistically significant difference in mean Gleason scores f (8.1 vs 7.7; p>0.05). Primary androgen deprivation therapy (PADT) was the main treatment for overall patients (48.0% and 50.7%, respectively). Radiotherapy and radical prostatectomy are the main therapeutic modalities for younger patients with local and locally advanced disease (39.6% and 35.4% respectively), while the majority of older patients with the same disease stage were treated with radiotherapy and PADT (45.8% and 39.0% respectively). Differences observed in treatment modalities were statistically significant (p<0.0003). We conclude that there is no difference in disease clinical aggressiveness of the two groups but significant differences were observed in therapeutic strategies utilised with younger and older patients.

• The Research Journal of the Costume Culture
• /
• v.11 no.1
• /
• pp.88-102
• /
• 2003

In our culture, the term, "be like", is frequently used. There are expressions such as "feminine-looking dress" and "manly style" relating to this term when we describe the styles of clothing. This study addresses the question on which type of garment would be selected under the description of the term, "be-like", in relation to gender. This term reveals the preconception of gender as being feminine or masculine according to the styles and colors of clothes. A group of 362 college students from Seoul and Gyeonggi area was surveyed fur the study The statistical analysis of SPSS 10.0 was applied f3r analyzing the data, and the significant variances were reviewed by the basic statistics, multi-variate and T-test. The results are as follows: First, the details of clothes imply the preconceived idea of gender. As a result, women's blouses and skirts were selected as the most feminine upper and bottom garments. The Y-shirt and T-shirt were selected as the most masculine upper garments. However, in contrast to the . skirts being the most feminine bottom wear, the pants were not significantly recognized as the most masculine ,clothes. Second, the variances of the survey show that the female students are more conscious of the sexual identity expressed in clothes than the male students. Third, the styles of clothes reflect the general understanding of what is considered to be "feminine or not feminine" and "masculine or not masculine" In conclusion, this study has discovered that the certain characteristics of gender are predominantly implicated in the styles length, and color of clothes. Both men and women responded differently in defining their idea of "femininity" and "masculinity". Nevertheless, there still exists strong preconception of what is considered to be feminine or masculine, and it affects the choices people make in selecting clothes.

• The Research Journal of the Costume Culture
• /
• v.20 no.5
• /
• pp.664-678
• /
• 2012

The purpose of this study is to define the relationships among the emotional labor, job satisfaction, and turnover intention of beauty industry workers. The data for this study were collected through a survey, and a total of 197 questionnaires were used in the statistical analysis. The survey items were classified into 4 domains: demographic characteristics, emotional labor, job satisfaction, and turnover intention. This study extracted factors that compose each measurement domain to define the impact of emotional labor on job satisfaction or turnover intention. According to the research results, 3 factors - positive norm, sincere behavior, and emotional incongruity - were extracted for emotional labor. Individual aptitude satisfaction and work environment satisfaction were extracted as the factors for job satisfaction, whereas a single factor was extracted for turnover intention. By analyzing the effect of factors related to the emotional labor of beauty in dustry workers on factors related to job satisfaction, results showed that positive norm positively influenced individual aptitude satisfaction, sincere behavior positively influenced individual aptitude satisfaction and work environment satisfaction, and emotional incongruity negatively influenced individual aptitude satisfaction. Among factors related to emotional labor, positive norm and sincere behavior negatively affected turnover intention, whereas emotional incongruity positively influenced turnover intention. With regard to the effect of job satisfaction on the turnover intention of beauty industry workers, results showed that individual aptitude satisfaction and job environment satisfaction negatively (-) affected turnover intention. The results of this study show that people presenting a high level of individual aptitude satisfaction displayed positive job satisfaction, whereas people showing serious emotional incongruity for work presented high turnover intention. This implies that in order to increase the work efficiency of beauty businesses, it is essential to examine and manage the emotional labor of workers as a measure for increasing job satisfaction and lowering turnover.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.42 no.2
• /
• pp.84-89
• /
• 2016

Objectives: To compare the efficacy of intravenous ondansetron (4 mg, 2 mL) and granisetron (2 mg, 2 mL) for preventing postoperative nausea and vomiting (PONV) in patients during oral and maxillofacial surgical procedures under general anesthesia. Materials and Methods: A prospective, randomized, and double blind clinical study was carried out with 60 patients undergoing oral and maxillofacial surgical procedures under general anesthesia. Patients were divided into two groups of 30 individuals each. Approximately two minutes before induction of general anesthesia, each patient received either 4 mg (2 mL) ondansetron or 2 mg (2 mL) granisetron intravenously in a double blind manner. Balanced anesthetic technique was used for all patients. Patients were assessed for episodes of nausea, retching, vomiting, and the need for rescue antiemetic at intervals of 0-2, 3, 6, 12, and 24 hours after surgery. Incidence of complete response and adverse effects were assessed at 24 hours postoperatively. Data was tabulated and subjected to statistical analysis using the chi-square test, unpaired t-test, or the Mann-Whitney U-test as appropriate. A P-value less than 0.05 was considered statistically significant. Results: There was no statistically significant difference between the two groups for incidence of PONV or the need for rescue antiemetic. Both study drugs were well tolerated with minimum adverse effects; the most common adverse effect was headache. The overall incidence of complete response in the granisetron group (86.7%) was significantly higher than the ondansetron group (60.0%). Conclusion: Granisetron at an intravenous dose of 2 mg was found to be safe, well tolerated, and more effective by increasing the incidence of complete response compared to 4 mg intravenous ondansetron when used for antiemetic prophylaxis in maxillofacial surgery patients receiving general anesthesia. Benefits of granisetron include high receptor specificity and high potency, which make it a valuable alternative to ondansetron.

• The Korean Journal of Community Living Science
• /
• v.27 no.4
• /
• pp.803-815
• /
• 2016

The purpose of this study is to increase our understanding of subjective well-being in adolescents and to help improve it by investigating the relationship among adolescents' temperaments, perceived parenting affective attitude and subjective well-being. For this study, the subjects were 354 students from 4 different middle schools in Gwang-ju, Korea. The statistical analysis of the data was conducted by means of the SPSS 21.0 program using Pearson's correlations and hierarchical regression. The results are as follows: First, the temperament and perceived parenting affective attitude were correlated with subjective well-being. Among the temperament traits, novelty seeking and harm avoidance showed negative correlations with subjective well-being, whereas affection, reward dependence and persistence showed positive correlations with subjective well-being. Second, after the mediating effect of perceived affection on subjective well-being was confirmed, three temperament traits, viz. harm avoidance, reward dependence, and persistence, were identified as mediating factors. The conclusion of this study is that adolescents' temperament and perceived parenting affective attitude are related to their subjective well-being and can also predict their subjective well-being. Harm avoidance, reward dependence, and persistence, which are inborn temperaments, affect subjective well-being. Affection, which is a perceived parenting affective attitude trait, affects subjective well-being as a mediation variable. This study also suggests that it is more effective to influence perceived parenting affective attitude, which has growth potential, rather than temperaments which are hard to change.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.115-122
• /
• 2016

OBJECTIVES : This study develops an evaluation method, which is useful to inspect pavement condition of specific boroughs. This is because pavement condition is broadly divided into five grades via visual inspection, which does not consider the types of deteriorations, and is decided by an investigator having a subjective viewpoint. This visual inspection method is not a satisfactory method for accurate maintenance when various deteriorations occur. METHODS : The performance model considers several factors such as crack, rutting, and IRI. This method is also modified from borough SPI based on SPI (Seoul Pavement Index). Considering limited budget of borough, PI (prediction index) is suggested, which is related to the grade of pavement condition evaluation and type of materials. Practical correlation review is also conducted with statistical verification by using the Monte Carlo simulation. RESULTS : The results of the study show that modified criteria are reasonable. First, the comparison between the visual inspection result and the SPI result indicates that the R-square value is sufficiently high. Second, through the common section, each evaluation method could be compared, and the result shows considerable similarity, which increases when the range is modified. Finally, PI for predicting remaining life and the random number SPI have common parts, which means that each indicator would be adequate to be used as an evaluation method. CONCLUSIONS : Comparison and analysis results show that the developed evaluation method is reasonable for specific boroughs where financial support is inadequate for the evaluation process by using the newer equipment. Moreover, for more accurate evaluation method, previous visual inspection data should be utilized, and the database of inspection equipment have to be collected.

• Journal of dental hygiene science
• /
• v.19 no.4
• /
• pp.238-244
• /
• 2019

Background: Recently, three-dimensional (3D) printing has been hailed as a disruptive technology in dentistry. Among 3D printers, a digital light processing (DLP) 3D printer has certain advantages, such as high precision and relatively low cost. Therefore, the latest trend in resin crown manufacturing is the use of DLP 3D printers. However, studies on the internal fitness of such resin crowns are insufficient. The recently introduced 3D evaluation method makes it possible to visually evaluate the error of the desired area. The purpose of this study is to evaluate the internal fitness of resin crowns fabricated a by DLP 3D printer using the 3D evaluation method. Methods: The working model was chosen as the maxillary molar implant model. A total of 20 resin crowns were manufactured by dividing these into two groups. One group was manufactured by subtractive manufacturing system (PMMA), while the other group was manufactured by additive manufacturing system, which uses a DLP 3D printer. Resin crowns data were measured using a 3D evaluation program. Internal fitness was calculated by root mean square (RMS). The RMS was calculated using the Geomagic Verify software, and the mean and standard deviation (SD) were measured. For statistical analysis, IBM SPSS Statistics for Windows ver. 22.0 (IBM Corp., USA) was used. Then, independent t-test was performed between the two groups. Results: The mean±SD of the RMS were 41.51±1.51 and 43.09±2.32 for PMMA and DLP, respectively. There was no statistically significant difference between PMMA and DLP. Conclusion: Evaluation of internal fitness of the resin crown made using a DLP 3D printer and subtractive manufacturing system showed no statistically significant differences, and clinically acceptable results were obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.167-176
• /
• 2017

The purpose of this study was to examine the effect of subordinates' emotional labor on job burnout and job engagement, and verify whether job crafting moderates the relationships between emotional labor and job related attitudes. A total of 301 employees working at various companies in Korea participated in an on-line survey and the data were examined by statistical analysis. The results showed that surface acting positively affected job burnout. It was found that deep acting positively affected job engagement, while negatively affecting job burnout. The results also demonstrated that job crafting moderated the relationship between surface acting and job engagement. It is suggested that employees' proactive behaviors designed to relieve the stress of work can mitigate the negative effect of emotional behavior. On the basis of the results, the implications and future research directions were discussed.