• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.147-155
• /
• 2011

The bridges where serious damages, defects, material degradations, etc. are not found can be presumed to have enough safety for the specified design loads, nevertheless, in many cases the loading carrying capacity is rated through loading tests. The safety specifications and manuals get no further than qualitative instructions for performing loading test or not. Some studies presented the improved appraisal methods for determining the load carrying capacity; however, the feasibility studies for loading test are scarcely carried out. This study examines an existing question, whether the loading tests are necessarily required in the safety assessment or not, and suggests an alternative for that via a statistical analysis for dozens of condition evaluation reports for concrete bridges.

• Restorative Dentistry and Endodontics
• /
• v.47 no.1
• /
• pp.8.1-8.9
• /
• 2022

Objectives: The aim of this study was to compare the color change of the Giomer resin composite (Beautifil-Bulk) by using photographs obtained with a smartphone (iPhone 6S) associated with Adobe Photoshop software (digital method), with the spectrophotometric method (Vita Easyshade) after immersion in different pigment solutions. Materials and Methods: Twenty resin composite samples with a diameter of 15.0 mm and thickness of 1.0 mm were confectioned in A2 color (n = 5). Photographs and initial color readings were performed with a smartphone and spectrophotometer, respectively. Then, samples were randomly divided and subjected to cycles of immersion in distilled water (control), açai, Coke, and tomato sauce, 3 times a day, 20 minutes for 7 days. Later, new photographs and color readings were taken. Results: The analysis (2-way analysis of variance, Holm-Sidak, p < 0.05) demonstrated no statistical difference (p < 0.005) between the methods in all groups. Similar color changes were observed for all pigment solutions when using the spectrophotometric method. For the digital method, all color changes were clinically unacceptable, with distilled water and tomato sauce similar to each other and with statistical differences (p < 0.005) for Coke and açai. Conclusions: Only the tomato sauce produced a color change above the acceptability threshold using both methods of color assessment. The spectrophotometric and digital methods produce different patterns of color change. According to our results, the spectrophotometric method is more recommended in color change assessment.

• Environmental Analysis Health and Toxicology
• /
• v.17 no.2
• /
• pp.147-160
• /
• 2002

Volatile organic compounds (VOCs) are an important public health issue in Korea and many important questions remain to be addressed with respect to assessing exposure to these compounds. Because they are ubiquitous and highly volatile, special techniques must be applied in their analytic determination Valid Personal exposure assessment methods are needed to evaluate exposure frequency, duration and intensity, as well as their relationship to personal exposure characteristics. Biological monitoring is also important since it may contribute significantly in risk assessment by allowing the estimation of effective absorbed doses. This study was on ducted to establish the environmental measurement, personal dosimetry and biological monitoring methods for VOCs. These methods are needed to compare blood, urinary and exhalation breath VOC levels and to provide tools for risk assessment of VOC exposure. Passive monitors (badge type) and a active samplers (trap) for the VOCs collection were used for air sampling. Methods development included determining the minimum detectable amounts of VOCs in each media, as well as evaluating collection methods and developing analytical procedures. Method reliability was assessed by determining breakthrough volumes and comparing results between laboratories and with other methods. A total capacity of trap used in this study was 60ι. Although variable by compound, the average breakthrough was 20％. Also, there was no loss of compounds in trap even if keep for 45 day in -7$0^{\circ}C$. The recovery of active and passive methods was 69％ ~ 126％ and method detection limit was 0.24 $\mu\textrm{g}$/trap and 0.07 $\mu\textrm{g}$/badge. There was no statistical difference (P > 0.05) between active and passive methods.

• Journal of Environmental Impact Assessment
• /
• v.9 no.3
• /
• pp.203-214
• /
• 2000

Health risk assessment is applied to streamlining LCA(Life Cycle Assessment) using Monte carlo simulation for probabilistic/stochastic exposure and risk distribution analysis caused by data variability and uncertainty. A case study was carried out to find benefits of this application. BTC(Benzene, Trichloroethylene, Carbon tetrachloride mixture alias) personal exposure cases were assumed as production worker(in workplace), manager(in office) and business man(outdoor). These cases were different from occupational retention time and exposure concentration for BTC consumption pattern. The result of cancer risk in these 3 scenario cases were estimated as $1.72E-4{\pm}1.2E+0$(production worker; case A), $9.62E-5{\pm}1.44E-5$(manger; case B), $6.90E-5{\pm}1.16E+0$(business man; case C), respectively. Portions of over acceptable risk 1.00E-4(assumed standard) were 99.85%, 38.89% and 0.61%, respectively. Estimated BTC risk was log-normal pattern, but some of distributions did not have any formal patterns. Except first impact factor(BTC emission quantity), sensitivity analysis showed that main effective factor was retention time in their occupational exposure sites. This case study is a good example to cover that LCA with probabilistic risk analysis tool can supply various significant information such as statistical distribution including personal/environmental exposure level, daily time activity pattern and individual susceptibility. Further research is needed for investigating real data of these input variables and personal exposure concentration and application of this study methodology.

• Journal of Pharmacopuncture
• /
• v.21 no.4
• /
• pp.258-267
• /
• 2018

Objectives: The purpose of this study was to find out validity of Surface Electromyography(sEMG) compared with Nerve Conduction Study and clinical assessment scale as assessment factors for facial palsy. Methods: We investigated 50 cases of patients with peripheral facial palsy who had records of sEMG and NCS to check. Then we analyzed the correlation between sEMG and NCS that carried out around 1 week after onset. And we analyzed the correlation between sEMG and clinical assessment scales that were measured three times around 1 week, 3-4 weeks and 5-6 weeks after onset. Clinical assessment scales used in this study were House-brackmann grade, Yanagihara unweighted grading scale and Sunnybrook facial grading system. We used Pearson's correlation for statistical analysis. Results: sEMG and NCS, measured at similar times, were statistically correlated. Especially, the correlation with the forehead region was high. And sEMG and clinical assessment scale, measured at same time, were statistically correlated, especially after 5 weeks from onset. Conclusion: According to this study, sEMG is expected to be useful to assessment facial palsy.

• Journal of Korean Academy of Nursing
• /
• v.27 no.1
• /
• pp.49-60
• /
• 1997

The purpose of this study was to determine the incidence of malnutrition among patients on admission to hospital, to monitor changes in their nutritional status during hospitalization, and to determine the factors which might affect changes in nutritional status. The subjects for the study were patients who were admitted to general medicine for more than one week. Patients suffering from cardiovascular. renal disease, or dehydration were excluded. Nutritional assessment of the patients was performed on admission and nutritional status was reassessed one week and two weeks after admission. The nutritional assessment tool consisted of subjective history taking and anthropometric measurements. Biochemical measurements were performed only on admission. For anthropometric assessment : patients' body weight, subcutaneous skinfolds thickness, % of body fat, body mass index, and lean body mass were measured using caliper or Bio impedance Analyzer. Factors which might influence current nutritional status, like dietary intake, anorexia, nausea, vomiting, diarrhea, sleep disturbance, and number of days of NPO for diagnostic examinations were analyzed. The results are as follows : 1. Of the 59 patients who were studied, 61% were male and 39% female. The nutritional status of all of the 59 subjects was reassessed one week after admission, but it was only done for 22 subjects at two weeks. 2. The anthropometric measurements. including weight body mass index, lean body mass, body fat. and skin fold thickness. were all significantly decreased at one week after admission compared to the values at admission. On the other hand, two weeks after admission, only body weight and abdominal skinfolds thickness were decreased. 3. The subjects reported anorexia for an average of two days, sleep disturbance for two days, and no food intake due to diagnostic test for one day. In the second week of hospitalization, almost none of the patients complained of gastrointestinal symptoms or sleep disturbance except anorexia. Food consumption which was measured based on rice intake was 60% of the food served during the first week of hospitalization, and 66% during the second week of hospitalization. 4. There was no correlation between the subjective nutritional assessment and anthropometric assessment. 5. There was no statistical significance in anthropometric measurements among the patients with various diseases whereas sleep disturbance and no food intake due to various diagnostic test was prominent in patients with gastrointestinal diseases.

• Journal of Environmental Impact Assessment
• /
• v.16 no.6
• /
• pp.447-465
• /
• 2007

The purpose of this study is to assess the sustainability in 45 cities of all over Gyeongnam and Gyeongbuk using weights and assessment system developed in leading research. The materials of assessment used statistical data and spatial data were standardized for the systematic result. The assessment score was established using the normal distribution from 25 to 125 for removal of the very smallest and maximum value. According to the results, Tongyeong was assessed the highest by 82.5 score in environmental sustainability index. In economical sustainability index, Pohang, Gumi, Changwon, Yangsan were more than 79 score but Busan, Daegu, Andong were less than 70 score. Ulsan, Geoje, Yangsan were assessed higher in society-institutional sustainability index and Jinju, Munkyeong, Changnyeong were showed higher than other cities by more 79 score in quality of life(QOL)'s sustainability index. In case of integrated sustainability index, Jinju that was the highest sustainability in QOL was assessed by first city. However, Ulsan was assessed the lowest city among others. Therefore cities which have high sustainability will prepare a politic investment program for maintaining current conditions. Cities which have low sustainability will grasp closely the environmental characteristics of urban and present the improvement direction through monitoring continuously. Overall, these results can be used as tools to assess the current cities and predict the future one. It is also necessary to establish a systematic urban planning for livable and sustainable city.

• Journal of Korea Multimedia Society
• /
• v.12 no.3
• /
• pp.383-396
• /
• 2009

Bone age assessment has been widely used in pediatrics to identify endocrine problems of children. Since the number of trained doctors is far less than the demands, there has been numerous requests for automatic estimation of bone age. Therefore, in this paper, we propose an automatic bone age assessment method that utilizes pattern classification techniques. The proposed method consists of three modules; a finger segmentation module, a normalized shape model generation module and a bone age estimation module. The finger segmentation module segments fingers and epiphyseal regions by means of various image processing algorithms. The shape model abstraction module employ ASM to improves the accuracy of feature extraction for bone age estimation. In addition, SVM is used for estimation of bone age. Features for the estimation include the length of bone and the ratios of bone length. We evaluated the performance of the proposed method through statistical analysis by comparing the bone age assessment results by clinical experts and the proposed automatic method. Through the experimental results, the mean error of the assessment was 0.679 year, which was better than the average error acceptable in clinical practice.

• Korean Journal of Community Nutrition
• /
• v.23 no.4
• /
• pp.277-288
• /
• 2018

Objectives: This study was performed to verify the validity and judgment criteria setting of a health status assessment tool based on dietary patterns for middle-aged women. Methods: A total of 474 middle-aged women who visited the Comprehensive Medical Examination Center at Hanmaeum Hospital in Changwon were enrolled (IRB 2013-0005). The validity was verified using clinical indicators for the diagnosis of metabolic syndrome (MS), and it was used to set the criteria for the tool. A logistic regression analysis was performed for validation. The area under-receiver operation (AUC), sensitivity, specificity, and Youden Index were calculated through ROC curve analysis. Statistical analysis was performed by SPSS 21, and p value <0.05 was considered to be statistically significant. Results: The mean score of the group with no MS (73.3 points) was significantly higher compared to the group with MS (65.7 points) (p<0.001). An analysis of the association between the tool scores and risk of MS showed a 0.15-fold reduction in the risk of MS every time the tool's score increased by one point. As the result of the ROC curve analysis, the assessment reference point was set to 71 points, indicating 77.0% sensitivity and 61.0% specificity. Risk of MS was significantly higher in the group with a score of less than 71.0 than a group with more than 71 points (OR=5.28, p<0.001). Conclusions: This study was the first attempt to develop a health status assessment tool based on the dietary patterns for middle-aged women, and this tool has proven its usefulness as an MS assessment tool through the application of middle-aged women in the field of health screening.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.1
• /
• pp.55-71
• /
• 2018

To improve the ecological function of urban areas, the guideline for applying the Biotope Area Ratio to the Environmental Impact Assessment (EIA) was developed in 2005 and modified in the July, 2017. This study investigates whether the guideline has been actually practiced in the real world by searching reports including 648 cases of the Strategic Environmental Impact Assessment (SEIA) and 471 cases of the EIA. The results show that the 38% of SEIA and the 43% of EIA include sections about Biotope Area Ratio, and the 15% of SEIA and the 25 % of EIA are satisfied the threshold of the Biotope Area Ratio suggested by the guideline. The statistical analysis results show that this low level of practice was not improved through the modification of the guideline in 2017. This is because the guideline is forcibleness, its explanation is unclear, and stockholders' understanding of it lacks. In addition, lack of tracking management on SEIA and EIA also contributes to the low level of practice of the guideline. To promote the practice, the efforts to legislate and publicize the guideline are required.