• Applied Chemistry for Engineering
• /
• v.24 no.2
• /
• pp.144-147
• /
• 2013

Sweating, which is the excretion of oil on the surface of a solid product containing several kinds of pigments in oil and is also solidified with wax, is a unique phenomenon often observed on the surface of cover make-up or lipstick. The cause of sweating is an imbalanced formula. Many studies have been conducted to decrease the symptoms of sweating in the field of cosmetics. Differential scanning calorimetry (DSC) is a thermo-analytical technique that measures the amount of heat required to increase the temperature of a sample as a function of temperature or time under certain conditions. DSC has been used to determine the thermal properties of oil/wax structures. This study investigates how the thermal characteristics correlate with the sweating symptoms. An oil/wax formulation with an optimal melting point was studied in an attempt to make a stable product by considering the thermal properties that represent minimal structural changes with temperature variation. In addition, the sweating of the oil/wax formulation was observed over a various temperature range. As a result, it was found that sweating was minimized when the structure remained static or little bit changed over a variety of temperatures.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.112-118
• /
• 1990

Catastrophic fracture cannot be avoided after cracks(initiated from pre-existing defects) propagate rapidly with speeds comparable to a sound wave velocity of the materials. Preventing catastropic failure, crack arrest fracture toughness defined from dynamic(or kinetic) fracture mechanics point of view has been introduced in determining accurate and/or proper crack arrest fracture toughness of a material. For the past decades, many studies have been carried out to render proper theoretical and experimental backgrounds on the use of the static plain strain crack arrest fracture toughness, $K_{1a}$ (which seems to be a material property). $K_{1a}$ has been used to predict the performance of thick walled structures and has been considered as a measure of the ability of a material to stop a fast running crack. Determination of such a material property is of prime importance to the nuclear reactor pressure vessel and bridge materials industries. However, standards procedures for measuring toughness associated with fast running cracks are yet to exist. This study intends to give insight on the determination of the crack arrest fracture toughness of materials such as polymethylmethacrylate(PMMA), SM45C-steel, and A1 7075-T6. The effects of crack jump lengths and fast crack initiation stress intensity factor on the determination of $K_{1a}$ have been experimentally observed.erved.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.27 no.5
• /
• pp.578-586
• /
• 2013

The objective of this study was to investigate the diagnosis and treatment of Sjogren's syndrome(SS) such as syndrome differentiation and herbal medicine by reviewing Chinese traditional medicine's journals. The journal search was carried out using China National Knowledge Infrastructure(CNKI) and PubMed from January 2007 to July 2012. Searching key words were the various combination of "Sjogren's syndrome", "Traditional Chinese Medicine", "herbal medicine", and "syndrome differentiation". The final selection of 57 studies were extracted and summarized by two researchers independently. The syndrome differentiation was classified as yin deficiency with fluid depletion, yin deficiency with dryness heat, dryness toxin with yin damage, internal obstruction of static blood, dual deficiency of qi and yang, dampness-heat obstructing, wind with external contraction, liver qi depression, blood deficiency and wind-dryness, dual deficiency of yin and yang, and internal obstruction of phlegm-blood stasis. Liriope platyphylla(麥門冬), Rehmania glutinosa(生地黃), and Scrophularia buergeriana(玄蔘) were primarily prescribed to tonify yin, engender fluid and moisten dryness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.844-847
• /
• 2005

A seamless analysis of complex geometry is one of greatly interesting topic. However, there are still gaps between the industrial applications and fundamental academic studies owing to time consuming modeling process. To resolve this problem, an auto mesh generation program based on grid-based approach has been developed for IT-product in the present study. At first, base mesh and skin mesh are generated using the information of entities which extracted from IGES file. Secondly the provisional core mesh with rugged boundary geometry is constructed by superimposing the skin mesh as well as the base mesh generated from the CAD model. Finally, the positions of boundary nodes are adjusted to make a qualified mesh by adapting node modification and smoothing techniques. Also, for the sake of verification of mesh quality, the hexahedral auto mesh constructed by the program is compared with the corresponding tetrahedral free mesh and hexahedral mapped mesh through static finite element analyses. Thereby, it is anticipated that the grid-based approach can be used as a promising pre-processor for integrity evaluation of various IT-products.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1733-1736
• /
• 2005

Many studies have been carried out to produce 3D features in the size range between $10{\mu}m\~10,000{\mu}m$, called Meso-scale. If these miniaturized systems have high relative accuracy and good volumetric utilization, it is possible to manufacture more complex and accurate shapes with various materials as well as there are advantages of reducing energy, space and resources. Due to imperfect components and misalignment in assembly, it is necessary to assess the accuracy of the miniaturized system itself to obtain high relative accuracy. Laser interferometers are widely used to measure geometric errors called as quasi-static errors. For miniaturized system, however, it is difficult to install the required accessories such as optics and the measuring range is limited because of the size of the system and also this method is very expensive. Moreover, it is impossible to measure each error component simultaneously. A new system to measure simultaneously multiple geometric errors is proposed using capacitance sensors. Each error was measured using capacitance sensors and a measurement algorithm was mathematically derived. The experiments show that the proposed measurement system can be used effectively to assess the accuracy of miniaturized system at a low cost.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.6
• /
• pp.711-720
• /
• 2002

A 3-D numerical model, which could demonstrate the static and dynamic responses of a curved bridge more precisely with the moving vehicles, was developed The dynamic response induced by the centrifugal rolling motion of vehicle was identified according to the variations of the partial grade and the curvature of the slab. Dynamic characteristics of the curved bridge with the moving vehicle were analyzed under the condition of support types and two different support systems. Parametric studies were conducted to compare the efficiency of load distribution in the curved bridge. In general, while the vehicle was crossing the curved bridge, negative reaction occurred in the inside of the girder. The final result showed that the support system located outside the girder was more advantageous than other systems, and the characteristics of load distributions differed from the others in the various conditions of support systems.

• Tribology and Lubricants
• /
• v.36 no.4
• /
• pp.215-231
• /
• 2020

The paper presents extensive survey and review of experimental and analytical researches on fluid film bearings and squeeze film dampers (SFDs) for turbomachinery available in open literature (major archival international journals) published recently (2018 and 2019 only). Over 60 published research works are reviewed based on the research topics and objectives, the types of bearings, size of bearings, and main design parameters with a brief summary of experiments and/or predictions in each work. Some important findings and general observations about the experimental and/or predictive data are also presented. There are several major trends observed throughout the survey. A large portion of the papers focuses on bearing surface textures and effect of operating and assembly conditions on static and/or dynamic forced performances, as well as bearing surface roughness and wear patterns. Researches on geometry of orifices and recesses in hydrostatic (or hybrid) bearings, as well as bearing system stability predictions using thermohydrodynamic analysis and computational fluid dynamics (CFD), are considered as significant topics. Studies on SFDs mainly focus on experimental identification of force coefficients for various SFD geometries and sealing conditions. Reliable experiments of fluid film bearings and SFDs along with the development of experimentally benchmarked predictive tools enable reinforcement of the path for reliable implementations of the bearing components into high performance rotating machinery operating at extreme and harsh conditions. The extensive list of sources of recent experiments in the available open literature is a welcome addition to the analytical community to gauge the accuracy of predictive tools.

• Microbiology and Biotechnology Letters
• /
• v.6 no.1
• /
• pp.1-8
• /
• 1978

In order to develop the processes for the production of fermented feed from cellulosic agricultural by-product, cereal straw, by th action of cellulolytic fungus, the properties of the cellulolytic enzyme produced by Trichoderma sp. KI 7-2 was studied. A higher enzyme activity was obtained in the culture added by 1％ rice or barley straw powder than in the culture of pure cellulose. The crude enzyme was prepared by precipitating from 20∼60％ saturated ammonium sulphate of the culture supernatant. The optimum conditions for the enzyme reaction were temperature of of 50$^{\circ}C$ and pH 4.2. The crude enzyme was static at 50$^{\circ}C$ for two hours and at pH between 4 and 6. These properties were adopted for the fermented feed production, and several production. Thus, several processes of semisolid culture were devicced to up grade tile fermented feed and to develop into the acceptable quality.

• Korean Institute of Interior Design Journal
• /
• v.19 no.6
• /
• pp.112-120
• /
• 2010

Human can recognize the environment by detecting spatial perception, and most of environmental perception depends on visual perception. In view that the acquisition of spatial information is accomplished through visual recognition, analysis of visual structure contained in the space is thought to be very important sector in studying the characteristic of the space. The history of studies on visual structure of space, however, wasn't too long, and furthermore most of the theories up to now focused on static and planar principles. Under this circumstance, this study is intended to suggest new theory by combining Isovist theory and VGA theory that have been actively discussed as the theory on visual perception-based spatial structure and supplementing them between each other to expand into 3-dimensional model. The suggested theory is a complex principle in dimensional and dynamic form in consideration of visual direction, which forms 3-dimentional virtual model that enables visualization of the property of spatial structure as the routine discriminating whether visual connection is made between viewing point and target point, and the target point is included in the visual field quadrangular pyramid or not. Such model was built up by an analysis application where four probe paths were applied to simulate the visual structure that occurs in virtual space, and then the characteristics were analyzed through quantification. In result, in spite of the path with equal space and equal length, significant difference in the acquired quantity of spatial information could be found depending on the probe sequence. On the contrary, it was found that probe direction may not affect the acquired quantity of information and visual property of the space.

• Journal of KIISE
• /
• v.44 no.1
• /
• pp.13-20
• /
• 2017

A message processor is server software that receives various message formats from clients, creates the corresponding threads to process them, and lastly delivers the results to the destination. Considering that each function of an SEDA-based message processor has its own characteristics such as CPU-bound or IO-bound, this paper proposes a thread-mapping strategy called "FC-TM" (function-characteristic aware thread mapping) that schedules the threads to the cores based on the function characteristics in multi-core environments. This paper assumes that message-processor functions are static in the sense that they are pre-defined when the message processor is built; therefore, we profile each function in advance and map each thread to a core using the information in order to maximize the throughput. The benchmarking results show that the throughput increased by up to a maximum of 72 % compared with the previous studies when the ratio of the IO-bound functions to the CPU-bound functions exceeds a certain percentage.