• Smart Structures and Systems
• /
• v.13 no.3
• /
• pp.353-374
• /
• 2014

Recent studies were dedicated to the realization of measurements on stay-cable samples of different geometry and static conditions as available at several facilities. The elaboration of the acquired data showed a a satisfactory efficacy of the dampers made of NiTi wires in smoothing the cable oscillations. A further attempt to investigate the applicability of the achieved results beyond the specific case-studies represented by the tested cable-stayed samples is herein pursued. Comparative studies are carried out by varying the diameter of the NiTi wire so that similar measurements can be taken also from laboratory steel cables of reduced size. Details of the preparation of the Ni-Ti wires are discussed with particular attention being paid to the suppression of the creep phenomenon. The resulting shape of the hysteretic cycle differs according to the wire diameter, which affects the order of the fitting polynomial to be used when trying to retrieve the experimental results by numerical analyses. For a NiTi wire of given diameter, an estimate of the amount of dissipated energy per cycle is given at low levels of maximum strain, which correspond to a fatigue fracture life of the order of millions of cycles. The dissipative capability is affected by both the temperature and the cycling frequency at which the tests are performed. Such effects are quantified and an ageing process is proposed in order to extend the working temperature range of the damper to cold weathers typical of the winter season in Northern Europe and Canada. A procedure for the simulation of the shape memory alloy behavior in lengthy cables by finite element analysis is eventually outlined.

• The Journal of the Korea Contents Association
• /
• v.18 no.5
• /
• pp.149-155
• /
• 2018

The purposes of this paper are to describe the burnout, absence and disciplinary action among police officers in Korea and to identify the correlation among these three variables. And aim of this study is to provide basic information for the health improvement of police officers in Korea. Studies have shown significant static correlation between the practice of absence from work and the absence from work that is false, but the coefficient of correlation is very low. In addition, there was no significant correlation between burnout and disciplinary action. Regression analysis showed significant relationships with burnout and absence intention, practice of absence and types of disciplinary action, but they were very poorly explained. So you can see that the burnout of police officers generally has a small effect on absence, but not on the disciplinary action. Future studies should include supplementary studies of these associations.

• The Journal of the Korea Contents Association
• /
• v.19 no.4
• /
• pp.102-110
• /
• 2019

Among the visual sensibility studies, many studies of color or movement have been done, but not much have been done about whether it can evoke sensibility in static form itself. Therefore, in this study, visual attention by AOIs(Area of Interests) combined with color based on three basic forms was analyzed using eye tracking, and the results were visually expressed through Heat Map and Gaze Plot. In addition, A Paired t-test was performed on the mean difference between the two groups to verify the statistical significance of each color and form. As a result of the experiment, the chromatic color form was more visual attention than the achromatic color form and warm color form was higher mean than cool color, so the visual attention was greater. In this study, it is meaningful to suggest a quantitative method which is easy to interpret objectively the design element that is easily interpreted subjectively. Based on the results of this study, if more further studies and quantitative analysis methods are presented that can identify differences in visual attention from various colors and forms, it can be used to provide guidelines for basic design.

• Physical Therapy Rehabilitation Science
• /
• v.12 no.1
• /
• pp.62-71
• /
• 2023

Objective: Stroke patients need the training to adjust their posture and maintain balance is necessary to restore movement function, and unstable support training is one of the appropriate training. In this study, a systematic review and meta-analysis were conducted to find out the effects of unstable surface training on balance and gait in stroke patients. Design: Systematic review and meta-analysis Methods: After creating a search expression referring to MeSH and EMTREE, the literature from 1976 to February 2022 was searched in the databases of PubMed, EMBASE, and Cochrane Library CENTRAL. A total of 331 studies were searched from three databases, and 11 studies were finally selected according to the inclusion criteria. Unstable surface training included studies using balance trainer, Whole-body vibration, and sand surfaces. Results: The results were found to be d=2.28 (p=0.02) and the effect size was 0.36 (95% CI: 0.05, 0.67) on the Berg Balance Scale. In the Kinesthetic Ability Trainer static balance, d=2.59 (p=0.01) and the effect size was 1.01 (95% CI: 0.24, 1.78). Timed Up and Go test showed that d=2.18 (p=0.03) and the effect size was 0.38 (95% CI: 0.04, 0.72). At the gait speed, d=0.99 (p=0.32) and the effect size was 0.15 (95% CI: -0.15, 0.45). In the 6-minute walk test, d=0.14 (p=0.89) and the effect size was 0.04 (95% CI: -0.47, 0.55). Conclusions: In this study was found that training was effective in balance if it became unstable in standing posture. Therefore, unstable surface training can be used to improve the balance of stroke patients in clinical practice.

• Journal of Periodontal and Implant Science
• /
• v.53 no.5
• /
• pp.388-401
• /
• 2023

Purpose: This study investigated the accuracy of free-hand implant surgery performed by an experienced operator compared to static guided implant surgery performed by an inexperienced operator on an anterior maxillary dental model arch. Methods: A maxillary dental model with missing teeth (No. 11, 22, and 23) was used for this in vitro study. An intraoral scan was performed on the model, with the resulting digital impression exported as a stereolithography file. Next, a cone-beam computed tomography (CBCT) scan was performed, with the resulting image exported as a Digital Imaging and Communications in Medicine file. Both files were imported into the RealGUIDE 5.0 dental implant planning software. Active Bio implants were selected to place into the model. A single stereolithographic 3-dimensional surgical guide was printed for all cases. Ten clinicians, divided into 2 groups, placed a total of 60 implants in 20 acrylic resin maxillary models. Due to the small sample size, the Mann-Whitney test was used to analyze mean values in the 2 groups. Statistical analyses were performed using SAS version 9.4. Results: The accuracy of implant placement using a surgical guide was significantly higher than that of free-hand implantation. The mean difference between the planned and actual implant positions at the apex was 0.68 mm for the experienced group using the free-hand technique and 0.14 mm for the non-experienced group using the surgical guide technique (P=0.019). At the top of the implant, the mean difference was 1.04 mm for the experienced group using the free-hand technique and 0.52 mm for the non-experienced group using the surgical guide technique (P=0.044). Conclusions: The data from this study will provide valuable insights for future studies, since in vitro studies should be conducted extensively in advance of retrospective or prospective studies to avoid burdening patients unnecessarily.

• Herbal Formula Science
• /
• v.16 no.2
• /
• pp.1-9
• /
• 2008

Objective : The purpose of this report was to provide the information about activity and safety of Ojeok-san by analyzing domestic/international papers about Ojeok-san. Methods : Domestic/international papers related to Ojeok-san were reviewed and analyzed. These papers were then classified by year, experimental method and subject. Results : The following results were obtained in this study. 1. The studies of Ojeok-san started from 1984 and has continuously increased. The studies were mainly focused on experimental models rather than clinical studies. 2. By subject, papers related to safety were most common with 5 papers among 20 papers. Besides there were papers related to efficacy of analgesic, anti-hyperlipidemic, anti-blood stasis and treatment for uterine myoma. 3. The papers related to safety were mainly focused on the effect of Okeok-san on liver function, renal function or metal concentration of organs such as blood, brain, liver, kidney and bone. Ojeok-san proved to be safe, but more clinical studies regarding the safety are needed hereafter. 4. Papers related to analgesic, anti-pyretic, anti-phlogistic activities of Ojeok-san were in vivo studies, and other papers were about anti-hyperlipidemic activity, apoptosis inducing activity on uterine myeloma cell line and anti blood static activity on hydrocortisone acetate induced blood statis model. 5. Case reports were about anti-lipidemia, analgesic effect for mastalgia/back pain and anxiety disorder due to climacteric changes. Conclusion : Ojeok-san is being used in various ways with analgesic, anti-pyretic, anti-phlogistic, anti-hyperlipidemic, anti-tumor or anti-blood statis activity. However, mechanism study should be conducted at the molecular biology level and more clinical studies on the efficacy of Ojeok-san are needed.

• Nuclear Engineering and Technology
• /
• v.50 no.5
• /
• pp.665-672
• /
• 2018

A venturi scrubber is an important element of Filtered Containment Venting System (FCVS) for the removal of aerosols in contaminated air. The present work involves computational fluid dynamics (CFD) study of dust particle removal efficiency of a venturi scrubber operating in self-priming mode using ANSYS CFX. Titanium oxide ($TiO_2$) particles having sizes of 1 micron have been taken as dust particles. CFD methodology to simulate the venturi scrubber has been first developed. The cascade atomization and breakup (CAB) model has been used to predict deformation of water droplets, whereas the Eulerian-Lagrangian approach has been used to handle multiphase flow involving air, dust, and water. The developed methodology has been applied to simulate venturi scrubber geometry taken from the literature. Dust particle removal efficiency has been calculated for forced feed operation of venturi scrubber and found to be in good agreement with the results available in the literature. In the second part, venturi scrubber along with a tank has been modeled in CFX, and transient simulations have been performed to study self-priming phenomenon. Self-priming has been observed by plotting the velocity vector fields of water. Suction of water in the venturi scrubber occurred due to the difference between static pressure in the venturi scrubber and the hydrostatic pressure of water inside the tank. Dust particle removal efficiency has been calculated for inlet air velocities of 1 m/s and 3 m/s. It has been observed that removal efficiency is higher in case of higher inlet air velocity.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.3
• /
• pp.253-261
• /
• 2004

Game theory is mathematical analysis developed to study involved in making decisions. In 1928, Von Neumann proved that every two-person, zero-sum game with finitely many pure strategies for each player is deterministic. As well, in the early 50's, Nash presented another concept as the basis for a generalization of Von Neumann's theorem. Another central achievement of game theory is the introduction of evolutionary game theory, by which agents can play optimal strategies in the absence of rationality. Not the rationality but through the process of Darwinian selection, a population of agents can evolve to an Evolutionary Stable Strategy (ESS) introduced by Maynard Smith. Keeping pace with these game theoretical studies, the first computer simulation of co-evolution was tried out by Hillis in 1991. Moreover, Kauffman proposed NK model to analyze co-evolutionary dynamics between different species. He showed how co-evolutionary phenomenon reaches static states and that these states are Nash equilibrium or ESS introduced in game theory. Since the studies about co-evolutionary phenomenon were started, however many other researchers have developed co-evolutionary algorithms, in this paper we propose Game theory based Co-Evolutionary Algorithm (GCEA) and confirm that this algorithm can be a solution of evolutionary problems by searching the ESS.To evaluate newly designed GCEA approach, we solve several test Multi-objective Optimization Problems (MOPs). From the results of these evaluations, we confirm that evolutionary game can be embodied by co-evolutionary algorithm and analyze optimization performance of GCEA by comparing experimental results using GCEA with the results using other evolutionary optimization algorithms.

• The Korean Journal of Pesticide Science
• /
• v.9 no.3
• /
• pp.243-249
• /
• 2005

The chemical and toxicological studies were conducted with acetamiprid 2% granules including different controlling agents for development of controlled-release acetamiprid 2% granule. The fundamental formulation recipe of acetamiprid 2% granule was prepared by the insoluble matrix using polyethylene wax. Starch, cellulose and mineral (calcium carbonate) were used as controlling agents. As a result of studies, release rate of active ingredient from granules into water static condition at $25^{\circ}C$ was increased by addition of starch and cellulose, but was decreased by addition of calcium carbonate. We could select calcium carbonate as controlling agent and make three granules which there were difference in release profiles of active ingredient according to contents of polyethylene wax. 24 hours-release rates of acetamiprid from three granules into water static condition at $25^{\circ}C$ were respectively 75, 50 and 25% when contents of wax were 2, 10 and 20%. The granule which 24 hours-release rate was 25% showed lower acute toxicity against mice and rats.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.2
• /
• pp.79-91
• /
• 2020

Accurate assessment of greenhouse gas emissions is a cornerstone of every climate change response study, and reliable assessment of greenhouse gas emission data is being used as a practical basis for the entire climate change prediction and modeling studies. Essential, fundamental technologies for estimating greenhouse gas emissions include an on-site monitoring technology, an evaluation methodology of uncertainty in emission factors, and a verification technology for reductions. The closed chamber method is being commonly used to measure gas fluxes between soil-vegetation and atmosphere. This method has the advantages of being simple, easily available and economical. This study presented the technical bases of the closed chamber method for measuring methane fluxes from a rice paddy. The methane fluxes from rice paddies occupy the largest portion of a single source of greenhouse gas in the agricultural field. We reviewed the international and the domestic studies on automated chamber monitoring systems that have been developed from manually operated chambers. Based on this review, we discussed scientific concerns on chamber methods with a particular focus on quality control for improving measurement reliability of field data.